Professional Documents
Culture Documents
Assignment 5 Plate Girder - Questions
Assignment 5 Plate Girder - Questions
1. In Clause 14.3.1 in CAN/CSA S16-09 of the standards, the web maximum slenderness
is limited to the following:
h 83,000
≤
w Fy
You are asked to carefully read the background material behind this requirement in your
textbook (by Kulak and Grondin) in (pages 194-197 in the tenth edition) and answer the
following:
a. Explain the rationale behind this requirement
b. List all the assumptions involved in the derivation
c. In Eq. 7.5 of your text, factor k was taken conservatively as 1.0. Is this a lower
bound or an upper bound of the true value of k. Propose a value for the other
bound of k.
d. Explain the difference between the equation
π 2E
σ cr = k 2
(middle of page 195)
l
r
π 2E
and σ cr = k 2
(following equation on Page 195).
(1 − ν ) r
2 l
Which equation is more accurate? Explain your answer.
e. Explain how this requirement would be modified for each of the following cases
The material Poisson’s ratio is 0.4
The maximum residual stress is 50% percent of the steel yield strength