Professional Documents
Culture Documents
WORK SMARTER.
NOT HARDER.
ANNOUNCING MULTIPLE REVOLUTIONS IN THE TENSIONING INDUSTRY WITH
THE NEW SUPERBOLT MULTI-JACKBOLT TIGHTENING TOOL (MJTT)
Do I need a specific drive system to use this How can I determine accurate bolt load?
tool?
The Superbolt Tool ensures that all jackbolts are
No, the Superbolt Tool can be adapted to any aligned, then applies an even and accurate
drive system. This means that you can use torque simultaneously to all jackbolts. This
existing equipment, including battery-operated ensures that traditional Superbolt precision is
tools. In order to adapt the tool to your drive maintained. The tool has been thoroughly
system, you will need to advise Nord-Lock tested, and it achieves a very high level of
Group of your existing drive and we will design accuracy. For even greater accuracy levels,
the specific Superbolt Tool to suit. calibration can be applied.
BALL
GEAR
1 Attach the ratchet cassette to 2 Replace the ratchet cassette 3 Engage the electronic nut runner
the jackbolts and then engage with the power cassette and onto the Superbolt Tool. Run
the hand-held battery-operated slide the Superbolt Tool into down until desired torque is
drill. Run the jackbolts to the position. achieved.
same starting position.
Nord-Lock Group
Tel: +46 40 602 46 00
Email: info@nord-lock.
com
www.nord-lock.com