Professional Documents
Culture Documents
#098 Feeder Parts Book Ip3 12-04-2019 Email
#098 Feeder Parts Book Ip3 12-04-2019 Email
ALASKA - USA
SWEDEN
RUSSIA
DENMARK LITHUANIA
CHINA
ISRAEL
KUWAIT
BAHRAIN
MEXICO SAUDI TAIWAN
ARABIA UNITED
HAWAII - USA ARAB INDIA HONG KONG
PUERTO RICO
EMIRATES
JAMAICA
THAILAND
SENEGAL
KENYA
ECUADOR
BRAZIL
INDONESIA
SINGAPORE
CHILE
SOUTH AFRICA
NEW
Introduction 5
Icon Definitions 5
Safety 6
Personal Safety Warnings 6
Machine Precautions 7
Overview 8
Standard Feeder Dimensions 8
Feeder Identification 9
Congratulations on the purchase of your new Multifeeder Technology, Inc. (MFT) Product Overview 10
equipment. This document is designed to provide you with information about the Feeder Main Components
basic setup and operation of your machine. Side View, Top View and Front View 11-13
Parts 14
This manual may not illustrate optional features or additions purchased and/or How to Identify Parts 14
integrated with your equipment. In order to function as intended, please ensure Consumable Parts Quick Find 15
that your equipment is properly installed and that maintenance is conducted at Main Box Assemblies
regular intervals. Compromised performance and unsafe conditions may result Outer Case and Width Components - Assy 8245113-0A 16-17
from unauthorized modifications. Unauthorized modifications of any kind will Right Side or Electronic Side Components - Assy 4361203-0D 18-21
Left Side or Electronics Side Components- Assy 4361500-0A 22-23
void the product warranty. This equipment requires operation by properly trained
Housing Box Right Assembly - 4360703-0C 24-25
personnel in accordance with applicable documentation, and using approved Stripping Crank Right - Assy - 4110800 26-27
product and procedures. Stripping Crank Left - Assy - 4110700 28-29
Split Collar Assembly - 4108000-0B 30-31
Technical phone support can be reached by calling (651) 407-3100, Monday Shaft Ball Screw Elevation - Assy 4315200 32-33
through Friday, 7:00 am to 5:30 pm Central Standard Time. Please have direct Main Discharge Assemblies
ED Discharge Components - Assy 4428503 34-35
access to your MFT system when you call.
ED Discharge Belt Track Components - Assy 4154300 36-37
XED Discharge Components - Assy 4428803 38-39
XED Discharge Belt Track Components - Assy 4154500 40-41
XLD Discharge Components - 4419100 42-43
XLD Discharge Belt Track Components - Assy 4154700 44-45
SLD Discharge Components - Assy 4419400 46-47
SLD Discharge Belt Track Components - Assy 4154900 48-49
250ip3 Upper Exit Roller - Assy 4028200 50-51
350ip3 Upper Exit Roller - 4028300 52-53
250ip3 HCP Discharge Components - ED - Assy 4418434 54-55
350ip3 HCP Discharge Components - ED - Assy 4418534 56-57
250ip3 HCP Discharge Components - XED - Assy 4418734 58-59
350ip3 HCP Discharge Components - XED - Assy 4418834 60-61
250ip3 HCP Discharge Components - XLD - Assy 4419080 62-63
350ip3 HCP Discharge Components - XLD - Assy 4419180 64-65
250ip3 HCP Discharge Components - SLD - Assy 4419481 66-67
350ip3 HCP Discharge Components - SLD - Assy 4419581 68-69
Drive Assembly
Drive Assembly Right Side DCC-3NPCA -Assy 4107703 84-85
Icon Definitions
Drive Assembly Left Side DCC - Assy 4107705 86-87
Bearing Housing Assembly Right Side IM - Assy 4103900 88-89
Bearing Housing Assembly Left Side IM - Assy 4103800 90-91
Caution:
Idler Shaft Bearing Assembly 4102500 92-93 This icon is used to alert you to very important safety instructions.
Idler Bearing Assembly 4102505 94-95
End Piece Bearing Assembly (SW) Stripper Wheel - Assy 4102600 96-97
End Piece Bearing Assembly (DC) Discharge - Assy 4102700 98-99
Maintenance 134
Preventive Maintenance Schedule 134-135
• Read all manuals and documentation completely prior Do not place any part of your body near the air • Ensure that your MFT equipment is securely • MFT equipment is intended to operate within the
to operation of MFT equipment. cylinder or connected components. mounted and properly electrically grounded following environmental ranges: Temp. 10° - 35°C
before operation. (50°-95°F); Non-condensing humidity 30% - 100%.
• Proper hearing and eye protection should be utilized • MFT equipment can cycle unexpectedly when
when operating or working near MFT equipment. not placed in safe mode with the E-Stop or by • Use only fuses of the correct type, voltage, and • Operate in a clean, well-lit area.
disconnecting power. current ratings (5 x 20mm, 10A, 250V, fast).
• MFT equipment includes multiple mechanical pinch • Do not operate MFT equipment around loose tools,
points which can cause serious injury. Be aware of • Make sure loose jewelry, clothing, long hair, • Perform regular inspection and maintenance of MFT materials, or anything that may accidentally interfere
pinch points and remove power to the machine if neckties, etc. are properly secured before equipment. Failure to do so may result in damage to with normal operation.
working near the pinch points. operating MFT equipment. the machine or injury to operators.
• Only properly trained personnel should operate MFT
• Do not insert your hand or any instrument into the • Always power down MFT equipment and • Do not stack anything on the equipment, even when equipment.
equipment while it is operating. disconnect the power cord before working on the not in operation.
electrical components or performing maintenance
• Always power down equipment before making tasks. • Only properly trained technicians should make
adjustments or clearing jams. adjustment or repair to MFT equipment.
• Do not use the MFT equipment, make mechanical
• Never use a knife or sharp instrument to adjust MFT adjustments, or perform maintenance tasks while
equipment or clear jams. under the influence of drugs or alcohol.
• MFT equipment may be unplugged in an emergency. • Your equipment may be equipped with specific
Some machines are equipped with an E-Stop which safety features. Consult your documentation or
will cut power to the motor. supervisor.
• Some equipment may be equipped with an air • The motherboard contains capacitors that will
cylinder that can actuate with the power on or off. retain an electrical charge even with power
disconnected.
Serial No..:
Use the illustration below to identify your feeder. Volts (120-240 VAC)........................: VAC
First locate the Serial Number Label on your Max Current Draw at 120 VAC.: Amps
1
Product
In-Feed
Area 2
Reference
Graphics Area
3
Feeder Discharge
Entrance Area
Operator
Interface
Feeder
Discharge Exit
Area
Select Number of Feed Belts Select Number of Discharge Belts Enter Product Length
6
1
1 7
9
2 10
3
11
9
4 2
5
6 7 8
Purple Stripper Wheel Part No. 10mm 20mm 30mm 60D 30mm 70D 30mm 85D
1097100 1097200 1097500 1097400 1097300
30mm 85 Durometer Stripper Wheels are the most common
used Stripper Wheels. Softer durometer and narrower
width Stripper Wheels are also available.Replace all belts
simultaneously for best performance.
Tan (Natural) Product Feed Belt – Grooved Part No. 10mm 20mm 30mm
1199700 1199800 1199900
30mm Tan or nature colored and grooved Product Feed Belts
are the most commonly used Product Feed Belts. A variety of
surface profiles and widths are also available. Replace all belts
simultaneously for best performance.
NOTE:
See more Discharge Belts, Stripper Wheels, and Feeder Belt options on page 74-81
NOTE:
Each feeder has a Replacement Part Guide that calls out specific Product Sensor Pair, Discharge belt, Stripper
Wheel, and Feed Belt. A copy of the Replacement Part Guide is sent with each feeder. If you do not have the
Replacement Part Guide, contact Customer Service at 651-707-3100, option 2, customerservice@multifeeder.com
Part numbers are engraved, molded or marked on the individual part. Please contact Multifeeder Technology
for assistance identifying any parts if necessary. Common hardware such as bolts, nuts or washers and the
like will not typically be marked with a part number.
Main Box Assemblies - Outer case and Width Components Assembly No. 8245113-0A Assembly No. 8245113-0A
250ip3 350ip3
Index Qty Part Part Description
Number Number
12
2
7 12 3332500 3332500 M6x25 BHSS
12 2 4315200 4315300 Shaft Ball Screw Elevation (See Pages 32 & 33)
10
6 2
2 13 1 4361200 4361200 Feeder Side Right DCC (See Pages 18-22)
5
2 11 14 1 4361300 4361300 Feeder Side Left DCC (See Pages 22-25)
2
3
1
Right Side or Electronic Side Components Assembly No. 4361203-0D Assembly No. 4361203-0D
41
1 42 250ip3 350ip3
1 Index Qty Part Part Description
Number Number
17
2
1 1 2016400 2016400 Bracket Discharge Mount R
15 4 7 40 44
4 1 2 1 1
2 1 2112500 2112500 Bearing Housing Cover Plate
10
2
38 3 1 2270300 2270300 Power Supply Shield Cover
4
12
4 4 1 2274000 2274000 Bellow Holder Bracket IM
Right Side or Electronics Side Components - continued Assembly No. 4361203-0D Assembly No. 4361203-0D
41
1 42 250ip3 350ip3
1 Index Qty Part Part Description
Number Number
17
2
28 2 3577800 3577800 Universal Double Joint 404 IM
15 4 7 40 44
4 1 2 1 1
29 1 3756500 3756500 Foam Filter
10
38 30 1 3830305 3830305 Label Case Ruller 305
2
4
12
4 31 1 3830805 3830805 Label Height Adj. E-Stop
28
37 1 4107703 4107703 Drive Assembly Right DCC-3 NPCA (See pages 84 & 85)
2
24 27 38 4 4108000 4108000 Split Collar M8 20 (See pages 30 & 31)
1 1
1
20 1
4
39 1 4110800 4110800 Stripping Crank Right (See pages 26 & 27)
10
2
40 1 4360703 4360703 Housing Box Right IM-3RD
9
6
41 1 4490800 4490800 Knob Height Adjustment DC
13
4 42 1 4490900 4490900 Knob Height Adjustment SW
30 31
1 1 29
1
14
7
2
1
11
3
18
3
37
1
55 3
1
1
25
2
46
1
Left Side or Electronics Side Components Assembly No. 4361500-0A Assembly No. 4361500-0A
250ip3 350ip3
10 Index Qty Part Part Description
2
Number Number
DETAIL A
SCALE 0.700
DETAIL LATCH
2 2 1511100 1511100 Insert Brass M8x09
SCALE 1.000
11
2 9 15
2 3 14
4
16
9 5 1
5 1 SEE DETAIL LATCH
250ip3 350ip3
Index Qty Part Part Description
Number Number
250ip3 350ip3
Index Qty Part Part Description
Number Number
250ip3 350ip3
Index Qty Part Part Description
Number Number
1
1
Shaft Ball Screw Elevation Assembly No. 4315200 Assembly No. 4315200
250ip3 350ip3
Index Qty Part Part Description
Number Number
Main Discharge Assemblies - ED Discharge Components Assembly No. 4428503 Assembly No. 4428503
350 ip3 Discharge shown 250ip3 350ip3
Index Qty Part Part Description
Number Number
ED Discharge Belt Track Components Assembly No. 4154300 Assembly No. 4154300
250ip3 350ip3
Index Qty Part Part Description
Number Number
XED Discharge Belt Track Components Assembly No. 4154500 Assembly No. 4154500
250ip3 350ip3
Index Qty Part Part Description
Number Number
XLD Discharge Belt Track Components Assembly No. 4154700 Assembly No. 4154700
250ip3 350ip3
Index Qty Part Part Description
Number Number
4-250 ip3
11 4154900 4154900 SLD Belt Track (See Pages 48 & 49)
6-350 ip3
SLD Discharge Belt Track Components Assembly No. 4154900 Assembly No. 4154900
250ip3 350ip3
Index Qty Part Part Description
Number Number
250ip3 Upper Exit Roller Assembly No. 4028200 Assembly No. 4028200
250ip3
Index Qty Part Description
Number
5
2 1
2
3
2
8
2
4
4
7
1
2
4
350ip3 Upper Exit Roller Assembly No. 4028300 Assembly No. 4028300
350ip3
Index Qty Part Description
Number
4
4 7
1
2
4
250ip3 HCP Discharge Components - ED Assembly No. 4418434 Assembly No. 4418434
250ip3
Index Qty Part Description
Number
8 16 19 9
2 4 4 2
1 4 1188021 Belt 15-HC44 ED HCP
12
7 1 3100401 Bolt M3x4x5 SHSS
2
8 2 3113000 Bolt M4x30 SHCS
1
4
6 26 22 9 2 3114000 Bolt M4x40 SHCS
1 5 1
350ip3 HCP Discharge Components - ED Assembly No. 4418534 Assembly No. 4418534
8 16 19 9
350ip3
2 4 4 2 Index Qty Part Description
Number
12
6 1 2208235 Bar Support Side Guide HCP SL 350
2
7 1 3100401 Bolt M3x4x5 SHSS
1
6
8 26
1
5 22 8 2 3113000 Bolt M4x30 SHCS
1
9 2 3114000 Bolt M4x40 SHCS
4
26 5 4142873 Discharge Table Rod HP HC2016 350
1 27
23
1
16
21 7 27 1 7007431 Sensor Pair HCP Gen-3 ED
4 1
SCALE 0.500
250ip3 HCP Discharge Components - XED Assembly No. 4418734 Assembly No. 4418734
250ip3
Index Qty Part Description
Number
350ip3 HCP Discharge Components - XED Assembly No. 4418834 Assembly No. 4418834
350ip3
Index Qty Part Description
Number
21
4
1 8 1186621 Belt 15-HC44 XED HCP
250ip3 HCP Discharge Components - XLD Assembly No. 4419080 Assembly No. 4419080
250ip3
Index Qty Part Description
Number
350ip3 HCP Discharge Components - XLD Assembly No. 4419180 Assembly No. 4419180
350ip3
Index Qty Part Description
Number
250ip3 HCP Discharge Components - SLD Assembly No. 4419481 Assembly No. 4419481
250ip3
Index Qty Part Description
Number
350ip3 HCP Discharge Components - SLD Assembly No. 4419581 Assembly No. 4419581
350ip3
Index Qty Part Description
Number
27
12 4 3222000 Bolt M5x20 FHSS
10
1 16
8 13 4 3232000 Bolt M6x20 FHSS
2
22 14 38 3311600 Bolt M4x16 BHSS
1
15 2 3321200 Bolt M5x12 BHSS
15
2
3 16 6 3502300 M4 Helical Spring Lock Washer
2
4
17 20
1 17 38 3502301 M4 Toothed Lock Washer
38 14 8
38 18 2 3502401 M5 Toothed Lock Washer
12 2
4 1
19 6 3503300 M4 Space Washer
18 23
2 16 20 8 3503815 Washer 10x15x2 BLK-DEL
13
4 25
7 11 8 21 6 3530700 Nut Key Side Guide HCP
1 2
22 1 4012010 Upper Discharge Gen-3 HCP 350
5
6
2
7
Table 3. IP3 Feeder Drive Pulleys
8
1
Part Number Description*
4118000 Drive Pulley Assembly 104620 10mm Wide
4118100 Drive Pulley Assembly 204620 20mm Wide
4118200 Drive Pulley Assembly 304620 30mm Wide
Table 1. IP Feeder Drive Section
3521600 M5x10 Set Screw
Item Part Number Description*
1 See Table 2 Spanning Shafts
Table 4. IP3 Feeder Idler Pulleys
2 4120900 Collar Feedbelt IP 20mm
3 4013200 Product Support Rod 12 27 Part Number Description*
4 See pages 80 & 81 Stripper Wheels 4118500 Idler Pulley Assembly 104620 10mm Wide - Metal
5 See Table 3 Drive Pulleys 4118600 Idler Pulley Assembly 204620 20mm Wide - Metal
6 See pages 78-79 Feed Belts 4118700 Idler Pulley Assembly 304620 30mm Wide - Metal
7 See Table 4 Idler Pulleys
4119200 Idler Pulley Assembly 204620 20mm Wide - Composite
8 See pages 130 -134 Support Curve Assembly
4119300 Idler Pulley Assembly 304620 30mm Wide - Composite
Cable Connections and Cables Schematic Drawing Cable Connections and Cables Table
7111000
P11 P9 7111100 Rear Connector Board
P10 CN1
P20 7110700 Motherboard Power Supply Board
P2 P31 JP1
7111660 4 7051100 Motherboard P19 7110100 Motherboard Power Supply Board CN2
P6 P12 7111000 Front Connector Board P1
P17
P27 P22 P10 7110650 Front Connector Board P3
P25
7111500 P15 7018600 Bottom Fan N/A
P28
PC104 N/A Computer Board CN8
5 Servo Motor
P20 P4 7111100 I/O Board P22
520xxxx P14 P22 7108700 I/O Board P9
7110300
9 E-Stop Button N/A
Front Connector Board P25 7110605
Front Connector Board P2
P16 P15 13 7049600
7018200 (250)
E-Stop P2 7018300 (350)
Motor Fan (Optional)
N/A
P22 P20 P19 Button P1 (Changes w/Feeder Size)
4 7018400 (550)
7110100
7111900
CN9 CN8 N/A Motherboard PC104
JP1
P22 7111100 Motherboard P4
12 7034100 I/O Board (Optional)
P9 7108700 Motherboard P22
CN1 CN2 Motherboard P25
13 7110605 E-Stop Button (Attached) 7110605
Front Connector Board P2
1 Discharge Belts 2 Product Feed Belts 1 *Discharge Belts - Typical Discharge Belts are available in 20mm or 10mm widths and the appropriate lengths to
accommodate most applications.
10mm 20mm 10mm 20mm 30mm
2 Product Feed Belts - Typical Product Feed Belts are available in 30mm, 20mm and 10mm widths to accommodate
most applications.
3 Product Transition Belts - These belts are also referred to as Bridge Belts. These belts are often used to assist
feeding smaller products 2 inches or less in length. (Refer to Pages 74 & 79)
4 Stripper Wheels - Typical Stripper Wheels are available in 30mm, 20mm and 10mm widths and several durometers
to accommodate most applications.
NOTE: All Multifeeder Technology OEM Discharge and Product Feed belts are constructed with proprietary raw
materials and specifications to provide the best possible performance from your equipment.
NOTE:
*HCP Discharge Belts are 15mm wide, purple elastic are 20mm and 10mm wide
Purple 10mm 1176300 1176400 1176500 1176600 General Purpose - Narrower Product
Blue* 15mm 1188021** 1186621 1186821 1187015 Higher Speeds - Higher Placement Accuracy
Light
20mm 1179300 1179400 1179500 1179600 FDA
Grey
Belts - Product Feed Belts Color Width Profile Part No. Typical Use Product Feed Belt Part Numbers
Purple 10mm Smooth 1191100 Used with narrower product. Offers delicate to general stripping profile.
10mm 20mm 30mm
10mm Grooved 1192100 Used with narrower product. Offers general to aggressive stripping profile.
20mm Smooth 1191200 Used with typical product. Offers delicate to general stripping profile.
20mm Grooved 1192200 Used with typical product. Offers general to aggressive stripping profile.
20mm Perforated 1194200 Used with thinner product. Used when vacuum assistance is required.
30mm Smooth 1191300 Used with wider product. Offers delicate to general stripping profile.
30mm Grooved 1192300 Used with wider product. Offers general to aggressive stripping profile.
30mm Perforated 1194300 Used with thinner product. Used when vacuum assistance is required.
Natural 10mm Smooth 1199100 Used with narrower product. Offers delicate to general stripping profile.
10mm Grooved 1199700 Used with narrower product. Offers general to aggressive stripping profile.
20mm Smooth 1199200 Used with typical product. Offers delicate to general stripping profile.
20mm Grooved 1199800 Used with typical product. Offers general to aggressive stripping profile.
20mm Perforated 1199500 Used with thinner product. Used when vacuum assistance is required.
30mm Smooth 1199300 Used with wider product. Offers delicate to general stripping profile.
30mm Grooved 1199900 Used with wider product. Offers general to aggressive stripping profile.
30mm Perforated 1199600 Used with thinner product. Used when vacuum assistance is required.
FDA 20mm Grooved 1192420 Used with FDA product. Offers general to aggressive stripping profile.
Bridge Belt 30mm Grooved 1192410 Used with FDA product. Offers general to aggressive stripping profile.
30mm Perforated 1192460 Used with FDA product. Used when vacuum assistance is required.
NOTE: Product Feed Belts are a consumable item and may require replaced when a specific wear point is
reached. This wear point is determined by your particular application. It is recommended that all Feed Belts to be
replaced at the same time. Combining new and worn Product Feed Belts may degrade the performance of the
Stripper Wheels
Stripper Wheel Part Numbers
10mm 20mm 30mm Color Width Part No. Description
Purple 10mm 1097100 Typically used with narrower product. For general applications.
20mm 1097200 Typically used with standard product. For general applications. 85 Durometer.
30mm 1097300 Typically used with wider product. For general applications. 85 Durometer.
30mm 1097400 Typically used with wider product. For general applications. 70 Durometer.
30mm 1097500 Typically used with wider product. For general applications. 60 Durometer.
FDA
30mm 1099300 Typically used with delicate or compliant product. 60 Durometer.
Urethane
All Product Feeder Belts MUST be installed with the included Shim Washers and as a complete set.
New and old belts cannot be mixed.
Drive Assembly Right Side DCC -3NPCA Assembly No. 4107703 Assembly No. 4107703
250ip3 350ip3
Index Qty Part Part Description
Number Number
1 1 4102600 4102600 End Piece Bearing Assembly SW (See Pages 96 & 97)
2 3 4102700 4102700 End Piece Bearing Assembly DC (See Pages 98 & 99)
3 3 1 4103900 4103900 Bearing Hsg Assembly Right IM (See Pages 88 & 89)
1
1
1
2
3
Drive Assembly Left Side DCC Assembly No. 4107705 Assembly No. 4107705
250ip3 350ip
Index Qty Part Part Description
Number Number
1
1 1 1 4102500 4102500 Idler Shaft Bearing Assembly (See Pages 92 & 93)
2 1 4102505 4102505 Idler Shaft Bearing Assembly KWY (See Pages 94 & 95)
3 1 4102600 4102600 End Piece Bearing Assembly SW (See Pages 96 & 97)
4 3 4102700 4102700 End Piece Bearing Assembly DC (See Pages 98 & 99)
5 1 4103800 4103800 Bearing Hsg Assembly Left IM (See Pages 90 & 91)
5
1
3
1
4
3
2
1
Bearing Housing Assembly Right Side IM Assembly No. 4103900 Assembly No. 4103900
250ip3 350ip
Index Qty Part Part Description
Number Number
3
2 1 2 1113300 1113300 Worm Gear A 1B 6 Z32020 IM
5
2 2 2 1432000 1432000 Worm Shaft Z32 IM
2 4
2 2
7
1
Bearing Housing Assembly Left Side IM Assembly No. 4103800 Assembly No. 4103800
250ip3 350ip3
5 6 Index Qty Part Part Description
3 Number Number
2 2 2
9 1 2 1113300 1113300 Worm Gear A 1B 6 Z32020 IM
2 2 2 1432000 143200 Worm Shaft Z32 IM
1 10
2 4 3 2 1432200 1432200 Ball Screw Sliding Block IM
SEE NOTE 1
7
1
Idler Shaft Bearing Assembly Assembly No. 4102500 Assembly No. 4102500
250ip3 350ip
Index Qty Part Part Description
Number Number
2
1
3
1
1
1
End Piece Bearing Assembly (SW) Stripper Wheel Assembly No. 4102600 Assembly No. 4102600
250ip3 350ip3
Index Qty Part Part Description
Number Number
End Piece Bearing Assembly (DC) Discharge Assembly No. 4102700 Assembly No. 4102700
250ip3 350ip3
Index Qty Part Part Description
Number Number
Electronic Side Discharge Pulleys - 25% DCC Assembly No. 4108100 Assembly No. 4108100
250ip 350ip
Index Qty Part Part Description
Number Number
5
4
6
2
3
1 1
2 1
1
NOTE:
If Discharge Pulleys are changed to a different Percentage or Gear Ratio, the software settings in
the Multifeeder must be changed also. The machine will then run at the proper speed.
For further information please contact Customer Service at customerservice@multifeeder.com,
or 651-407-3100 Option 2. Have the serial number of the machine ready.
Electronic Side Discharge Pulleys - 8% Aluminum Assembly No. 4108300 Assembly No. 4108300
350ip 350ip3
Index Qty Part Part Description
Number Number
NOTE:
If Discharge Pulleys are changed to a different Percentage or Gear Ratio, the software settings in
the Multifeeder must be changed also. The machine will then run at the proper speed.
For further information please contact Customer Service at customerservice@multifeeder.com,
or 651-407-3100 Option 2. Have the serial number of the machine ready.
Electronic Side Discharge Pulleys - 25% Aluminum Assembly No. 4108200 Assembly No. 4108200
250ip3 350ip3
Index Qty Part Part Description
Number Number
NOTE:
If Discharge Pulleys are changed to a different Percentage or Gear Ratio, the software settings in
the Multifeeder must be changed also. The machine will then run at the proper speed.
For further information please contact Customer Service at customerservice@multifeeder.com,
or 651-407-3100 Option 2. Have the serial number of the machine ready.
Electronic Side Discharge Pulleys - 50% Aluminum Assembly No. 4108250 Assembly No. 4108250
250ip 350ip3
Index Qty Part Part Description
Number Number
NOTE:
If Discharge Pulleys are changed to a different Percentage or Gear Ratio, the software settings in
the Multifeeder must be changed also. The machine will then run at the proper speed.
For further information please contact Customer Service at customerservice@multifeeder.com,
or 651-407-3100 Option 2. Have the serial number of the machine ready.
Electronic Side Discharge Pulleys - 100% Aluminum Assembly No. 4108290 Assembly No. 4108290
250ip 350ip
Index Qty Part Part Description
Number Number
NOTE:
If Discharge Pulleys are changed to a different Percentage or Gear Ratio, the software settings in
the Multifeeder must be changed also. The machine will then run at the proper speed.
For further information please contact Customer Service at customerservice@multifeeder.com,
or 651-407-3100 Option 2. Have the serial number of the machine ready.
Mechanical Side Pulley Set - DCC Assembly No. 4108400 Assembly No. 4108400
250ip3 350ip3
Index Qty Part Part Description
Number Number
Mechanical Side Pulley Set - Aluminum Assembly No. 4108700 Assembly No. 4108700
350ip3 350ip3
Index Qty Part Part Description
Number Number
Alpha Motor
J - Motor
To identify between the two types of motors, we look at the end opposite of the motor shaft. J motors
have a silver color cap over the motor encoder, and the Alpha motor caps are all black in color over
the motor encoder.
J- Motor Medium Gearing Aluminum Pulley Set Assembly No. 4100120 Assembly No. 4100120
350ip 350ip
Index Qty Part Part Description
Number Number
4
2
1 1 1052265 1052265 Pulley Assembly 22 T
6
1
2
1
3
1
7
1
J- Motor Low Gearing Aluminum Pulley Set Assembly No. 4100122 Assembly No. 4100122
350ip 350ip
Index Qty Part Part Description
Number Number
6
2 1 1 1052265 1052265 Pulley Assembly 22 T
2 1 1052273 1052273 Timing Pulley 68 T
3 1 1059617 1059617 Timing Belt 95 T 68-22
HUB OF PULLEY
TOWARDS
3 MOTOR FACE
4 1 3521500 3521500 M5x8 Set Screw
1
1
1
5 1 3521600 3521600 M5x10 Set Screw
6 2 3522600 3522600 M6x10 Set Screw
7 1 3578736 3578746 Key Finished Ends 5x5x25
8 1 3578746 3578746 Key Finished Ends 6x6x25
7
1
2 4
1 1
8
1
5
1
Alpha Motor Medium Gearing Composite Pulley Set Assembly No. 4109000 Assembly No. 4109000
250ip3 350ip3
Index Qty Part Part Description
Number Number
Alpha Motor Medium Gearing Aluminum Pulley Set Assembly No. 4108900 Assembly No. 4108900
250ip3 350ip3
Index Qty Part Part Description
Number Number
Alpha Motor Low Gearing Composite Pulley Set Assembly No. 4109300 Assembly No. 4109300
250ip3 350ip3
Index Qty Part Part Description
Number Number
NOTE: Apply Loctite 242 Thread Locker to Set Screws of Pulley 1057400 only
Alpha Motor Low Gearing Aluminum Pulley Set Assembly No. 4108800 Assembly No. 4108800
250ip3 350ip3
Index Qty Part Part Description
Number Number
www.multifeeder.com
Index Support Curve
128
● Allows for easy set-up. Saves you time and money!
units for recipe set-ups
PARTS
● Utilizes a measurement scale to record product stacking adjustments for recipe set-ups.
1-651-407-3100
Side Guide Selection and Measurement Chart
www.multifeeder.com
To order guides, call Customer Service at 651-407-3100, Select 3 for Replacement Parts Example:
25mm plate has a working distance of 25mm.
Actual size is 56.8mm.
DO NOT MEASURE ACTUAL SIZE
Measure
WORKING DISTANCE
in millimeters,
from face of rod
to guide bend
for ordering
side guides
WORKING DISTANCE
Guide bend
Face of rod *See note
for Metal
and
129
Composite
Clamping
Brackets
PARTS
*First number indicates support curve width, second number indicates support bar length
Heavy Duty Rear Support Assemblies Heavy Duty Rear Support Assemblies
425 mm Support Curve shown
Part Number Description*
100 mm
Width 4191000 Prodcut Support HD 100 425
Support
Bracket *First number indicates support width, second number indicates support bar length
HD
M8x16
Adjustable
Leveler
425 mm
Length
Holder
Bracket M8
Product Support
Holder Bracket
Proper operation of your Multifeeder equipment is dependent on a regularly preventative Date Type Comments Initials
maintenance scheduled and inspection program. The generic scheduled outlined in this
section may need to be adjusted to your specific application and environmental conditions. 10-10-05 Weekly Blew out the dust and debris the collected on the machine. DM
Warnings
• Before any maintenance tasks are performed, the power must be disconnected from the Feeder.
• Use only a 50% isopropyl alcohol and water solution unless otherwise noted. Other cleaning agents may
damage the material.
• Isopropyl alcohol is very flammable! Use only in an open area away from any source of ignition, including
open flame or sparks.
• Be certain that the belts are completely dry before operating equipment. Damp belts may slip or track
incorrectly causing injury or damage to the equipment.
• ONLY USE CLEAN DRY AIR IF PNEUMATIC AIR IS REQUIRED FOR YOUR APPLICATION.
Daily
• Clean any debris from the equipment with a clean cloth dampened with the alcohol/water solution.
• Visually inspect the rollers and guides for damage or unusual wear.
• Visually inspect the machine for loose screws, bolts, and adjustment knobs.
Weekly
• Inspect the photo optic sensors with clean lint free cloth dampened with the alcohol/water solution if
necessary.
• Inspect any belt pulleys for looseness and tighten if necessary. With the power cable disconnected the
pulleys may be rotated manually.
• Remove any adhesive buildup.
Semi-Annually
• Open the side covers and remove any accumulated debris if necessary.
Annually
• Inspect all belts, bearings and timing belts for wear and replace if necessary.
MULTIFEEDER TECHNOLOGY, INC. (MFT) TERMS AND CONDITIONS Seller will not collect an otherwise applicable tax if Buyer’s purchase is exempt from Seller’s collection of such tax and a valid tax exemption certificate is furnished by
ALL SALES ARE SUBJECT TO THE FOLLOWING TERMS AND CONDITIONS. Buyer to Seller.
1. Definitions. 4.5 Cancellation of Orders. Following Seller’s acceptance of Buyer’s Order, the Order can be cancelled only with Seller’s written consent. A minimum cancellation
1.1 “Accessory Products” mean spare parts purchased, at Buyer’s option, to enhance the System or replace components within the System. charge of 35% of the purchase price of the System or Accessory Products will be assessed and will vary according to the date on which the cancellation occurs in the
1.2 “Agreement” means this Sale Agreement. Production Schedule, the quantity of work and materials that are salvageable, the degree to which the System is custom-designed, and other factors in MFT’s sole
1.3 “Buyer” means the person or entity that enters into this Agreement for the design and for manufacture of the System, subsystem accessory products, or related discretion.
services and/or Buyer’s assigns, successor’s agents and transferees. 4.6 Additional Charges. Additional work completed or time consumed by reason of Buyer’s alterations or delays caused by Buyer, will be charged to Buyer at Seller’s
1.4 “Default Specifications” means the MFT Default Specifications set forth in Exhibit A, attached hereto, which set forth the default functional and technical performance current price for work or material at the time of such alterations, changes, or delays.
1.5 “Final Product Throughput” means the end-product as fully processed by the MFT System. 5.1 Payment of Purchase Price. If Seller approves Buyer for credit, the payment schedule is (a) 55% of the purchase price in certified or other currently available funds
1.6 “MFT” means Multifeeder Technology, Inc. within five (5) days following acceptance of Buyer’s Order; (b) no later than ten (10) days before Buyer’s requested shipment date (i) 35% of the purchase price in
1.7 The “Operation and Maintenance Manual” means the operative and instruction guide supplied by Seller to Buyer, which addresses one or several of the devices, certified funds; and (ii) the remaining balance by Buyer’s delivery of an irrevocable letter of credit or some other MFT-approved payment alternative, drawn on a U.S.
components or Subsystems within the System. bank in an amount equal to the remaining balance due for the benefit of Seller or Seller’s agent. The letter of credit and/or its equivalent must be drawn on a financial
1.8 “Order” means Buyer’s order in the form of Seller’s Proposal, signed by Buyer and delivered to Seller. institution and in form reasonably acceptable to Seller, must be in U.S. dollars, and will expire no earlier than 60 days after the requested shipment date. Under no
1.9 “Order Acknowledgement Form” means the written form Seller sends to Buyer indicating that Seller is in receipt of Buyer’s Order. circumstances will Seller be liable to Buyer for delays in shipment caused by Buyer’s delay in payment. If Seller does not approve Buyer for credit, payment will be
1.10 “Parties” means the Buyer and Multifeeder Technology, Inc. disbursed to Seller within five (5) days following acceptance of Buyer’s Order by certified or other currently available funds or by Buyer’s delivery of an irrevocable letter
1.11 “Product Samples” mean Buyer-supplied components and/or material to be fed through and/or processed by the System to create a Final Product of credit or some other MFT-approved payment alternative, drawn on a U.S. bank in an amount equal to the full amount of the purchase price. The letter of credit and/
Throughput. or its equivalent shall provide for interim draws in accordance with the schedule referenced in the preceding paragraph, be drawn on a financial institution and in form
1.12 “Product Schedule” means the actions undertaken by MFT to design and build the System over a period of time. reasonably acceptable to Seller, in U.S. dollars, and will expire no earlier than 60 days after the requested shipment date. Buyer authorizes Seller to review any and all
1.13 “Production Schedule Date” means the date upon which production is scheduled for completion. necessary credit reports and information to assess whether Seller will extend credit to Buyer.
1.14 “Proposal” means Seller’s written description of the System and/or Accessory Products 5.2 Invoicing for Ongoing Services and/or Accessory Products. Seller will invoice Buyer for any ongoing services or Accessory Products purchased separately from
1.15 “Quote” means the price quote for the System and/or Accessory Products. Buyer’s Order for the System. Invoices will reference purchase order number, item number and description of product(s) and/or service(s), unit price of products and/or
1.16 “Seller” means Multifeeder Technology Inc. service(s), total amounts due, and the due date. Invoices shall be due and payable within thirty (30) days after the date of invoice. Payments will be applied to oldest
1.17 “Shipment Date” means the estimated date upon which MFT anticipates shipment of the System from the MFT facility. invoices first. Overdue invoices will accrue interest at a rate equal to the lesser of 18% per annum or the maximum rate allowable by law.
1.18 “Specifications” means the functional and technical performance criteria for the System, as agreed-to by the Parties. 5.3 Non-payment of Amounts Due. Seller hereby retains a security interest in the System or Accessory Products for any portion of the purchase price thereof unpaid by
1.19 “Subsystem” means any smaller MFT-designed system that constitutes a component of the overall System. Buyer. Seller is authorized to perfect its security interest. In addition, if payment in full is not made within sixty (60) days following delivery of the System, or within 60
1.20 “System” means the custom-designed product manufactured by Seller according to the Specifications, which may or may not include various other days of the invoice date for any and all additional charges accrued by Buyer, whichever applies, Seller may at its sole discretion, activate the control software installed
Subsystems. in the System that will disable the System from functioning. Upon receipt of full payment, Seller will reactivate the System.
1.21 “System Manual” means the operative and instruction guide supplied to Buyer by Seller with the shipment of the System, which addresses the overall System, and may 6. Performance of System and Product Samples.
or may not address each separate device, component or Subsystem within the System 6.1 Acceptance Criteria of System Performance. The acceptance testing shall be conducted in two (2) phases, as set forth below:
2. The System. 6.1.1 Phase One Acceptance Testing. Prior to shipping the equipment from the Multifeeder Technology, Inc. facility to the place of delivery, MFT will conduct a system
2.1 Purchase and Supply. Seller will sell the System and/or Accessory Products to Buyer under the terms and conditions set forth in this Agreement. performance test mutually-agreed upon with the Buyer and reduced to a writing signed by both Parties. Buyer may, at its option, witness the Phase One Acceptance
2.2 Specifications. The System will be manufactured by Seller according to the Specifications. The Proposal will include a Quote for each component of the System. If the Test in person or by electronic means supplied by MFT. If the Parties do not agree upon an a specific test, the Parties agree that MFT will conduct a 30-minute test
Buyer does not provide specifications prior to the Quotation process, the Default Specifications will apply. All specifications supplied by Buyer are subject to (a) MFT’s demonstrating 90% uptime, after excluding any lost time or lost production due to Nonconforming Product Samples (defined in section 3.3 of Exhibit A and all related
written approval and (b) signature by a MFT-authorized representative. subsections) or other factors out of MFT’s control. MFT reserves the right to restart or continue the test until completed, or to abbreviate the test by discounting lost time
2.3 Packing. Unless otherwise specified in this Agreement or Buyer’s Order, the System and/or all Accessory Products are to be packed and identified in accordance with or lost production due to Nonconforming Product Samples or other factors out of MFT’s control. It is Buyer’s responsibility to supply an adequate amount of acceptable
customary industry practice. Seller shall mark each container with necessary lifting, loading and shipping information, including the applicable purchase order number, quality test product pursuant to ¶ 6.2 below. MFT bears no responsibility if Buyer fails to provide Product Samples to MFT.
date of shipment, and the name and address of Seller and Buyer. 6.1.2 Phase Two Acceptance Testing. After completion of delivery of the System, assembly, and training at the place-of-delivery, MFT personnel will conduct a second test
3. Assent to Terms and Conditions of Agreement. Unless otherwise indicated, Seller’s Proposal will expire thirty (30) days following the date the Proposal is transmitted to confirm the System’s performance (“Phase Two Acceptance Testing”). The Phase Two Acceptance Testing will be conducted using the same Product Samples and
to Buyer. Seller’s Proposal is not binding upon Seller until Buyer’s Order is accepted in writing by Seller on an Order Acknowledgement Form. Buyer’s Order must be performance criteria specified for the Phase One Testing. If the Phase One performance criteria are met during the Phase Two Acceptance Testing, the Parties agree
submitted within the time frames provided herein. that the System shall be deemed accepted.
4. Price, Price Adjustment & Additional Charges. 6.2 Acceptance of All Other Goods. For any other goods that are not subject to paragraphs 6.1.1 – 6.1.2, Buyer will have ten (10) days after receipt to reject nonconforming
4.1 Price. The purchase price for the System will be set forth in the Quote. The pricing of Accessory Products is subject to change from time to time. goods before such goods are deemed accepted by Buyer.
4.2 Price Adjustment. The purchase price in the Quote may be increased to reflect increases in the cost of materials or labor, if: 6.3 Product Samples. Seller requires Buyer to supply Product Samples to MFT prior to MFT’s submission of a Proposal to Buyer, and in sufficient quantities to (a) evaluate
4.2.1 Shipment of the System is scheduled for a date that is more than three (3) months after the date of Buyer’s Order; Product Samples for consistency in structure and form, and (b) design the System Specifications to process the Product Samples provided. The projected System
4.2.2 Shipment of the System is delayed by Buyer to a date that is more than three (3) months after the date of Buyer’s Order; or performance, as presented in the Proposal, is valid only for Product Samples provided to Seller prior to the date of the Proposal. Buyer must also supply to Seller
4.2.3 Shipment of the System is accelerated due to an accelerated Production Schedule Date. actual Product Samples to the same specification as those provided prior to the MFT Proposal, so that MFT may conduct Acceptance Testing of the System, as set
4.3 Delivery, Risk of Loss and Title. The System will be delivered f.o.b. Seller’s Minnesota facility. Buyer will pay all packaging, handling and freight to Buyer’s destination. forth above in paragraphs 6.1.1-6.1.2. MFT will estimate and advise Buyer of the quantity of Product Samples MFT requires. If not otherwise specified by MFT, MFT
Risk of loss or damage to the System passes to Buyer at the time of delivery to the carrier. Seller will purchase shipping insurance at Buyer’s request and at Buyer’s requires a stack of each Product Sample, approximately 25 inches high, for testing any System that is composed of feeders. If automatic product loaders are to be
expense. Transfer of title is not deemed to occur until payment in full has been received by Seller. Shipment dates are Seller’s best estimate of when product(s) will be tested, a minimum of 5,000 samples are required. Product Samples should be shipped at Buyer’s cost to Seller no later than ten (10) days after Seller’s acceptance
shipped or delivered, but the Shipment Date is not guaranteed. of Buyer’s Order. Product Samples will not be returned. Seller does not guarantee feeding performance of any specific product unless an exact Product Sample has
been tested before delivery of the System to Buyer. LIMITED WARRANTY AND LIMITATION OF LIABILITY To activate the warranty, Buyer must sign and return to
from the date of delivery of the System to Buyer or for 2000 operating hours, whichever occurs first, that the System or Accessory Product(s) will be free from defects 13.1 Governing Language. The English language of this Agreement shall govern and control any translations of the Agreement into any other language. Documents furnished
in material and workmanship. An extension of this Limited Warranty is available for an additional charge. OTHER THAN THE FOREGOING, NO WARRANTY OR by Buyer to Seller under the terms of this Agreement shall be furnished in English or accompanied by an English translation. Seller will not be held responsible for errors
GUARANTEE, WHETHER STATUTORY, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY AS TO MERCHANTABILITY OR FITNESS FOR ANY PURPOSE IS or misunderstandings that may occur due to omissions or translations to another language. Seller reserves the right to correct all errors.
MADE. THE EXPRESS WARRANTY SET FORTH HEREIN SHALL BE THE SOLE AND EXCLUSIVE REMEDY BY THE BUYER HEREUNDER FOR ANY SYSTEM 13.2 Assignment. This Agreement shall be binding upon and shall inure to the benefit of Buyer and Seller and their respective successors and assigns, provided, however,
OR ACCESSORY PRODUCTS DELIVERED TO THE BUYER WHICH ARE FOUND TO BE DEFECTIVE IN ANY MANNER, WHETHER SUCH REMEDIES BE IN that Buyer may not assign its rights or delegate its duties under this Agreement without Seller’s prior written consent, which may be granted or withheld at Seller’s sole
CONTRACT, TORT, STRICT LIABILITY, OR BY LAW. OTHER THAN AS SET FORTH HEREIN, SELLER SHALL UNDER NO CIRCUMSTANCE BE DIRECTLY OR discretion. Buyer and its assignees and/or transferees of the System and/or Accessory Products, including all associated proprietary and intellectual property rights,
INDIRECTLY LIABLE FOR ANY LOSS OR DAMAGE HOWSOEVER ARISING FROM SUCH MERCHANDISE, INCLUDING LOST USE, LOST PRODUCT, LOST agree to the terms and conditions of the Agreement. Buyer agrees to indemnify, defend and hold harmless Seller for any claim or loss or damage suffered as a result
REVENUE, LOST PROFITS, COST OF CAPITAL, OR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES. If during the warranty period, the System or an of any assignee or transferee failing to abide by these terms and conditions.
Accessory Product fails to meet the Specifications, Buyer shall notify in writing of the specific nature of the failure and all-pertinent observations related to the failure. 13.3 Counterparts. This Agreement may be executed in multiple identical counterparts, all of which taken together constitute a single agreement.
Seller does not represent or warrant that Systems or Accessory Products sold by it complies with OSHA or any like state, local, or national law or regulation, and the 13.4 Entire Agreement. This Agreement and any exhibits attached hereto, including Multifeeder Technology, Inc. General System Default Specifications (Exhibit A),
cost of modification and responsibility for such compliance is imposed upon Buyer. Equipment must be used in a non-condensing, low-humidity, dry environment, constitute the entire agreement and understanding between Buyer and Seller. All prior written or oral agreements, undertakings, promises, warranties, or covenants
unless explicitly exempted by MFT in writing. THE TOTAL CUMULATIVE LIABILITY OF SELLER TO BUYER FOR ANY CLAIM OF ANY KIND, FOR ANY LOSS OR relating to any subject matter not expressly set forth within this Agreement are hereby superseded.
DAMAGE WHATSOEVER ARISING OUT OF, CONNECTED WITH OR RESULTING FROM THE SALE OR SERVICING OF THE PRODUCTS HEREIN, SHALL 13.5 Amendments and Waivers. No inconsistent, additional or modified terms or conditions, including price, will apply unless specifically agreed to in a writing signed by
NOT EXCEED THE PURCHASE PRICE OF THE SYSTEM OR ACCESSORY PRODUCT. BUYER AGREES TO INDEMNIFY, DEFEND AND HOLD HARMLESS Buyer and Seller. No waiver of any provision or condition shall be valid unless set forth in a writing signed by the waiving party.
SELLER FROM ALL CLAIMS ARISING IN WHOLE OR IN PART ON ACCOUNT OF IMPROPER USE, ABUSE, MISUSE, USE NOT IN ACCORDANCE WITH 13.6 Force Majeure. Whether foreseen or unforeseen, Seller will not be liable for any failure, defect in performance, delay in the performance of orders or in the delivery of
SELLER’S RECOMMENDATIONS SET FORTH IN THE OPERATION, MAINTENANCE AND SYSTEM MANUALS SUPPLIED BY SELLER, OR BUYER’S FAILURE goods, or for any damages arising from events beyond Seller’s reasonable control, including without limitation, acts of Buyer, acts of God, accidents, fires, floods, acts
TO PERFORM UNDER THIS AGREEMENT. Warranty coverage excludes cost of delivery to and from Seller’s Minnesota facility. All units that the customer wishes of insurrection or war, governmental interference, embargo, delays by the shipper, strikes, labor disturbances, unavailability or shortage of supplies or raw materials,
to have repaired under warranty shall be accompanied by a MFT issued Returned Material Authorization (RMA) and must be sent to Multifeeder at Buyer’s expense. unforeseen absence of transportation capabilities or rescheduled, postponed or cancelled transportation arrangements, changes due to export controls or the ability
A service fee of $500.00 will be charged for products sent to Seller for warranty repair, which are found to comply with the Specifications. Seller reserves the right to obtain an export license, or any other like cause.
to suspend any and all warranties if the Buyer has a delinquent account. The System and Accessory Products are sensitive. To qualify for the warranty set forth in
this Agreement, the System and Accessory Products warranted must be repaired by knowledgeable and specially trained MFT personnel only. Accordingly, warranty 13.7 Limit of Time to Bring Action. No actions or arbitrations arising out of this Agreement may be brought by Buyer more than eighteen (18) months after the occurrence of
coverage will be void in its entirety upon any sign or evidence of (a) opening the System or field service conducted by individuals other than Seller’s authorized the event giving rise to such action or arbitration.
personnel, (b) tampering or any kind of misuse of the System including Buyer’s use of belts, Stripper Wheels or other parts not supplied by Seller, or (c) abuse of the 13.8 Attorneys Fees. Seller will be entitled to recover reasonable attorneys’ fees and costs in any proceeding to enforce payment from Buyer.
System or Accessory Products. Non-warranty work will be completed according to Seller’s standard rates and charges in effect at the time. 13.9 Buyer’s right to use all of Seller’s products, systems and materials are conditioned upon Buyer’s acceptance of these Terms and Conditions.
7. Confidentiality. Buyer acknowledges that Seller’s technology is confidential and agrees not to disclose or utilize for its own commercial benefit any technology that Buyer
learns through the purchase or use of the Systems and/or Accessory Products. In no manner does this Agreement imply or authorize any form of technology license EXHIBIT A: MULTIFEEDER TECHNOLOGY, INC.
to Buyer for any portion of Seller’s technology except for Buyer’s use of the System and Accessory Products for their intended purpose. GENERAL SYSTEM DEFAULT SPECIFICATIONS
8. Export Controls. Buyer agrees that it will not, without obtaining prior authorization from the U.S. Department of Commerce: 1.0 SCOPE. The scope of these Default Specifications is to define the equipment configuration and performance requirements for the Custom Multifeeder Technology,
(i) export or re-export, directly or indirectly, any technical data or products (as defined by the U.S. Export Administration Regulations) received by Buyer under this Inc. System (hereinafter “System”). All definitions set forth under the MFT Terms and Conditions apply to these Default Specifications.
(ii) disclose such technical data to destinations restricted or prohibited by U.S. law; or National Electric Code 1993
(iii) export or re-export, directly or indirectly, any direct product resulting from the technical data received by Buyer to destinations restricted or prohibited by U.S. law. Buyer 3.0 DEFAULT SPECIFICATIONS. The System shall be configured as specified herein (the “Default Specifications”), unless more specifically defined in the applicable
hereby agrees to indemnify, defend and hold harmless Seller for any export, re-export or disclosure in violation of U.S. law that results directly or indirectly from Buyer’s Proposal. To the extent that any of the Default Specifications specified here are varied by the Proposal submitted to Buyer, for the purposes of creating custom-
actions. designed product-specific or application-specific requirements, those specifications that are specially varied will apply. Other than to the extent specifically varied in
10. Patents. Seller warrants that it has utilized reasonable efforts to ensure that the System and/or Accessory Products do not infringe on any patented technology the Proposal, the Default Specifications apply.
belonging to any other person or entity. If infringement is found and Buyer’s use of the System, Subsystem and/or Accessory Products is restricted, Seller will, at its 3.1 POWER REQUIREMENTS. Each Subsystem will have 110 VAC +/-10%, 50/60 HZ or 208 VAC +/- 10% 50/60 HZ single phase power available on a circuit capable of
option, either (a) redesign the System, Subsystem, and/or Accessory Products to avoid the infringement; (b) seek a license to allow the current technology to be utilized delivering 15 amps minimum per feed station. The power will be clean and free from power surges or power outages. The power, fusing, wiring and disconnects will
by Seller; or (c) allow Buyer to return the System, Subsystem and/or Accessory Products for a full refund. be in accordance with the applicable requirements of the National Electrical Code, as updated.
11.1 Governing Law. The laws of the State of Minnesota, United States of America and any applicable Federal laws of the United States of America, as from time to time 3.2.1 TEMPERATURE REQUIREMENTS. The System will be maintained and operated in a location where the temperature range is maintained between 10 to 35 degrees
amended and in effect, govern all matters arising out of or relating to this Agreement, including without limitation its validity, interpretation, construction, performance Celsius (50 to 95 degrees Fahrenheit).
(including the details of performance), and enforcement. The Parties agree that any applicable conflict of law provision that results in the application of the laws of 3.2.2 HUMIDITY REQUIREMENTS. The System will be maintained and operated in a non-condensing, dry location with a relative humidity range of 40 to
a foreign jurisdiction shall be disregarded. Buyer and Seller expressly agree that neither this Agreement, nor any ancillary agreement, undertaking, or performance 80%.
that may be promised, performed, or executed to implement this Agreement will not be subject to or interpreted by the United Nations Convention on Contracts for 3.3 PRODUCT SAMPLE REQUIREMENTS. This System is a customized high technology system that depends upon strict quality standards and uniformity of Product
International Sale of Goods. Samples handled in order to achieve strict quality standards and uniformity of Final Product Throughput. By way of example and without limitation, the Product
11.2 Foreign Corrupt Practices Act of 1977. Buyer is subject to the laws and regulations of the Foreign Corrupt Practices Act of 1977 (FCPA), Title 15 United States Code Samples to be fed and/or processed by the System will be uniform and free of defects, such as bent corners, dog ears, warpage, tears, bends, folds, debris,
Service section 78dd-1 and its progeny. contamination, any other nonconforming factor that affects feeding and/or secondary processing, or any other nonconforming Product Sample Tolerances as defined
11.3 Prohibition on Flowdown Provisions. In no event will this Agreement be subject to any other contract which would subject Seller to any additional terms and conditions below. Product Samples that do not fall within the Product Sample Tolerances set forth below or within the Proposal will be deemed “Nonconforming Product
or liability. Buyer bears all liability for all other contracts to which Buyer is subject. Samples.”
12. Forum Selection Clause. Buyer and Seller agree that all disputes, claims, controversies and disagreements relating to or arising out of this Agreement are subject to 3.3.1 PRODUCT SAMPLE TOLERANCES.
the exclusive jurisdiction and venue of the state and federal courts of Minnesota, of the United States of America. Buyer waives any objections to jurisdiction or venue 3.3.1.1 DIMENSIONAL TOLERANCE. The dimensional tolerance of any Product Sample will exhibit no more than a +/- 1/32 inch variance from the nominal values designated
in any proceeding before any such court in Minnesota and hereby submits to the exclusive jurisdiction of any such court in Minnesota. Buyer and Seller agree that the in Buyer’s Proposal.
exclusive choice of forum set forth in this section does not prohibit the enforcement of any judgment obtained in that forum or any other forum.
3.3.1.3 THICKNESS TOLERANCE. The thickness of any Product Sample will exhibit no more than a +/-10% variance from the nominal values designated in Buyer’s
Proposal.
3.3.1.4 FLATNESS TOLERANCE. The maximum warpage or curl of any Product Sample will be less than +/- 1/16 inch when measured lying on a flat
surface.
3.4 OPERATOR REQUIREMENTS. Due to the customized high-technology of this System, it is imperative that all users of the System (“operators”) adopt and practice
MFT-documented operating procedures to properly function. To ensure effective production, all equipment operators must (a) be properly trained by MFT-authorized
personnel and (b) adhere at all times to the prescribed procedures set forth in the various Operation, Maintenance and System Manuals. All System Performance
Specifications and Guarantees are conditioned upon the adherence of all operators to the above-mentioned requirements. By way of example without limitation, all
operators must be capable of performing all equipment adjustments and product set-up procedures in accordance with the applicable Operation, Maintenance and
System Manuals, and trained to properly load product into the Feeder magazines, perform Feeder parametric settings and to properly adjust photo-eyes and holding
apparatuses.
3.5 RELIABILIY OF PRODUCT SAMPLES SUPPLIED TO MFT. In order to design and build a System that will assemble and/or process Final Product Throughput that is
consistent in specification, the MFT System requires consistent Product Samples. In order to accomplish this goal, the performance projected within MFT’s Proposal
is valid only for (a) those Product Samples that pass MFT’s factory testing prior to MFT’s draft Proposal; and (b) those Product Samples that (1) conform to the MFT
pre-proposal factory testing and (2) are provided to MFT prior to MFT’s receipt of Buyer’s Order and in sufficient quantities to perform testing prior to shipment of the
equipment (“Phase One Acceptance Testing” Terms and Conditions paragraph 6.1.1).
3.6 PROCEDURES FOR ACTIVATING WARRANTY COVERAGE. The MFT General System Default Specifications incorporate the Limited Warranty set forth under
Multifeeder Technology, Inc. Terms and Conditions. All warranties require the Buyer to return a signed copy of the signature page of the Proposal to Multifeeder
3.6.1 EQUIPMENT WARRANTY. All applicable equipment warranties require the Buyer to return a fully completed warranty registration card to Multifeeder Technology, Inc.
If the equipment requires return to MFT, the Buyer shall call MFT in advance and request a return material authorization number (RMA), which must be written on the
3.6.2 PERFORMANCE WARRANTY. Upon request of the Buyer, Multifeeder Technology, Inc. will negotiate and price into its Proposal an efficiency level (parts per minute
at a to-be-determined confidence level) for each type of Product Sample received by MFT, in sufficient quantities and with sufficient time to perform testing on the
System, provided that such Product Samples are consistent and conforming. For purposes of calculating an efficiency level, all lost time or lost production due to
Nonconforming Product Samples or factors out of MFT’s control shall be subtracted from the production uptime, and product changeover time is excluded. To qualify
for any applicable performance warranty the Buyer agrees to comply with the following:
a) The System will be completely installed by qualified MFT personnel and all operators will be properly trained by qualified MFT personnel;
b) Buyer will notify MFT in writing of any deficiencies observed in the System’s performance with sufficient detail to assist MFT in determining the source of the reported
problem;
c) Product Samples are in compliance with the Product Sample requirements and tolerances specified herein; and
d) Upon proper notification of any problem, MFT will have 30 days to repair, replace, or arrange a partial or complete refund in exchange for returning the defective
equipment. The amount of refund will depend upon the problem, equipment condition upon return, and the assignment of responsibility. The amount of any refund will
ALASKA - USA
SWEDEN
RUSSIA
DENMARK LITHUANIA
CHINA
ISRAEL
KUWAIT
BAHRAIN
MEXICO SAUDI TAIWAN
ARABIA UNITED
HAWAII - USA ARAB INDIA HONG KONG
PUERTO RICO
EMIRATES
JAMAICA
THAILAND
SENEGAL
KENYA
ECUADOR
BRAZIL
INDONESIA
SINGAPORE
CHILE
SOUTH AFRICA
NEW ZEALAND
Multifeeder Technology provides high performance friction feeding and labeling solutions throughout the
world. With state-of-the-art control technology and robust mechanics, our products feed and label more quickly
and accurately to provide customers with a greater value of return. All feeders, labelers and accessories can
easily be integrated with other machines to provide a total system solution for any application. Multifeeder Technology®
4821 White Bear Parkway
St. Paul, MN 55110
Phone: 651-407-3100
Fax: (651) 407-3199
www.multifeeder.com marketing@multifeeder.com