Operation Instruction
1, The product is consisted of a manual oil pump and jack. It boasts compact structure and convenience
for use.
2. When using it, firstly, please insert the quick connector (6) of the rubber tube of oi] pump
into the connector of the jack, and screw down the sheathing of the quick connector, and then
screw down the oi return valve (4) and release the hexagonal socket screw (2) at the rear of
the pump, pull the handle (1) up and down to operate it.
3. Do confirm the center of gravity of the object to be lifted and select the working point when
you use it. The object to be lifted is not allowed to exceed its rated weight, do not operate
the product under the condition of overloading.
4, Please screw out the hexagonal screw (3) at the rear of the pump to add oil if needed. The oil
must be clean and use YU-NI5 hydraulic oil.
i
(1) Handle (6) Quick connector
(2) Hexagonal socket screw (7) Connector
(3) Hexagonal screw (8) Head
(4) Oil return valve (9) Oil cylinder
(5) Leather tube
oe Tomnage [Stroke [Oi capacity [se sump | Closed beiatt [Ge
« om) (co) (ox) tke)
TvG=1050 10 50 72 18-7006 7 25
tNG-10100 10 100 145 1p-7000 iar 45
imyo-10i50 | 10 | 150 27 ttB-7006 226 58
Tv6-2050 20 50 Mi 18-7006 105 5
Hiv6-20100 20 100 282 18-700 165 15
Fv6-20150 20 150 4123 "5-700 230, 9.8
F-30650 30 50 210 16-7006 108 5.5
tv6-30100 30 100 418 700 167 9
iN =30150 30 150) or HB-7004 233 1LT
HVG-5050 50 50 318 8-700 113 8
L v6-50100 50 100 635, HB-7008 173 18
tvG-50150 50 150 953, HB-7008 243, 18
Nv-10050 100 50 63 o-700 136 19
HYG~100100 100 100 1246, 16-7008 22 u
wwve-100150 | 100 150 1869 HB-7008 282 10.5