GEOWEB® CELLULAR CONFINEMENT
SYSTEM
MATERIAL SPECIFICATION
Saas q
NOTE: All measurements are subject to manutacturing tolerances unless otherwise stated.
sevens]
‘Geoweb sections, wit or wihouttrdons, shall be anchoredin acordance wih cnstcion drawings
Fws of stake anchors shal engage and bear aga te cel wal, oF engage and eld he rtegra ondons
‘gaia! the foundaton soi. The az, type and datibulon of sake anchors shal bein acrordance wit fo
retucion erawigs.
‘Standard Stake Anchors
ATRA™ Clip Stake (Recommended)
ATRA™ ali stakes shall conse of straight #4 stl reinforcing rod andthe
[ATRA clip as an end cap. The ATRA™ clip challbe molded fom high
strength polyethylene.
Steel pin Stakes
‘Steel pin stakes shal be fabricate trom mid ste! or reinforcing steel rod
Each stack shal ave a minimum-radus, 180-degree relum at one end,
Fiod dlameter shal be 8 am (0.3125 n), 10 ram (0.75 mn), 12mm (050 in),
16mm (0.625 in) oF 20 mm (0.75). ‘Stake langth shal be per the
construction drawings. When specied, galvanizing shall be per AASHTO
mae
Straight Stoel Stakes
Straight ste! sakes shal be fabricated trom mid tooo reinforcing ste!
‘od, od dameter shall be 8 mm (0.3125 in) 10mm (0.375in), 12 mm
(0.50 in), 18 mm (0.625 n) or 20 me (0.75 in). Stake length shal be por
the consruction crawings. When spectod, galvanizing call be por
AASHTO M216,
CLT
Wood Sta Figure 9 ATRA™ Clip,
Stakes ‘Stake
Wood stakes shall be mage trom (state wood type) and be tree rom knots whieh
wil etfoct the strengin ofthe staka. The sakes shall have across secton of by
and be rong.
‘The spectar shall state which ofthe anchoring methods are required forthe application and choose from
the sates options. Role to THE GEOWES SYSTEM TECHNICAL OVERVIEW fr recommendations
Prot 120818 anorGEOWEB® CELLULAR CONFINEMENT
SYSTEM
MATERIAL SPECIFICATION
Tendons Z
Polyester Tendons ~ Polyethylene Coated
“Tho polyester london shall be manufactured trom bight high-enaciy,Industi-continuous lament
polyester yarn woven into around braided cord consisting ofa para fament inner core covered with
5a erands ol braided polyester, The overall mass shall bo 12 Kg/1000 m (8.111000 Nt). Elongation
‘hallbe approximately 10% at 450 kg (1000 oad. The coatng over the polyester tendon sale low:
Senay polyethylene witha thlckness of 0.40.8 mm (15-25 mis). The tendon reference name, width and
‘minimim break stength shall be par Table 4
Polyester Tendons - Uncoated
‘The polyester tandon shal be manufactured from bight, high-enacty, instal. contruous-lament
polyester yam woven into a braided strap. Elongation shall be 9-15% al break. The tandon reference
‘ame, wid and minimum break strength shal be por Tablo 4
‘Table 4 Polyester Tandon - Coated and Uncoated
Tendon Diameter /Width
‘Tendon Minimum Break Strength
Feference Name
rom a eo
TPC-71 (coated)
TP-13 (uncoated)
P-20 (uncoated)
P-25 (uncoated)
‘TP-32 (uncoated)
TP-40 (uncoated)
‘TP-66 (uncoated)
The ATRA™ Clip Restraint Pin
“The ATRA" olp shall be used ae a lac transler pn within the tendones
Geoweb® system. The ATRA™ clp restrain pin shal anster oad rom tha
infiled Geoweb cat to the tendon, The ATAA™ cip hall be molded from
high strength polyethylene,
Figure 8
( Specitier Choice
“The specifier shall stat which tendon eo be used. Tendon strength must meet design requirements for
the appscalon, ‘The specter shall algo sale the ATRA™ cip rosa pins needed. el to THE
GEOWES SYSTEM TECHNICAL OVERVIEVs for recommendations.
Pace {10H