Professional Documents
Culture Documents
Experiment-4:
Dynamic analysis of Buck converter.
Aim:
Aim of this experiment is to observe the output waveforms after load change and change
in the input voltage.
Components: TL494 control circuit board, circuit of uncontrolled rectifier, IRF480
MOSFET, rheostat(50ohm/5A), capacitor (47microF and 220microF), inductor(1.2mH),
Diode (BY399), wires.
.
Circuit:
c. Output:
d. Observation:
• Maximum Voltage is 10.2 V.
• The dip we see in the figure is due to the inductor because inductor doesn’t
allow sudden changes in the current.