Professional Documents
Culture Documents
ZL-2
Brief introduction
Function description
● Power on switch
● Water inlet
The cooling fluids flow in the ZL-2 through this water inlet.
● Water outlet
The cooling fluids flow out the ZL-2 through this water outlet.
Specification
Installation
Open the package, take out manual, instrument, and accessories. And check items
according packing list. Any mismatch/damage happened, please contact marketing
department immediately.
Unit settle
It must be placed on stable work station/table and put damping pad between table
and unit.
Minimum space required around test is 0.5m, to ensure heat escaping. Clean
Instrument periodically to prevent it from abnormal cooling.
Connect the ZL-2 and the HW-2 with attached plastic pipe. The inlet and the
outlet are on the rear panel. The inlet of the ZL-2 is connected to the outlet of
the HW-2, while the outlet of the ZL- 2 is connected to the inlet of the HW-2.
The pipe suit with maximum temperature thimble is the shortest practical
length.
Soak the pipe in hot water to soft it before connecting the pipe.
Link the socket & AC output socket of the HW-2 with attached power cord.
Cooling fluids
Cooling bath
The blocked cooling system consists of cooling bath inside ZL-2 and constant
temperature bath. It gets up preset temperature in 30 minutes when distillation
water is used.
Operation
Turn the power switch to I position, the power indicator lights, the bath runs.
After the fluids without bubble flow smoothly, Turn the power switch of refrigerator
to I position, the power indicator lights, the refrigerator runs.
First turn the power’s switch of the refrigerator to O position, the power
indicator off, turn it off. Turn the power switch of the bath to O position, the
power indicator off, the bath off.
When the refrigerator shut off, allow about five minutes before restarting the
unit. Otherwise it will be damaged.
Maintenance
Must clean box and bath periodically, do not use steel brush, it result in damage
to the equipment.
Clean it at least on a month.