Professional Documents
Culture Documents
Archetype Nolly v2.0.0
Archetype Nolly v2.0.0
NEURALDSP.COM
CONTENT NEURAL DSP // NOLLY ARCHETYPE
EQ Section 11
NEURALDSP.COM
GETTING STARTED NEURAL DSP // NOLLY ARCHETYPE
NEURALDSP.COM
VST and ASIO are trademarks of Steinberg Media Technologies GmbH
GETTING STARTED NEURAL DSP // NOLLY ARCHETYPE
If you don’t have an iLok account, you can create one right · Log in with your iLok account in iLok License Manager.
here:
5
Then, iLok License Manager software will be installed on
your computer… and that’s it! Please, note that your trial · After that, drag and drop your license from the available
expires after 14 days. tab to your computer on the left under the LOCAL Tab. For
example:
Full Product
To get a full activation code for any of our products, please
create a Neural DSP account on our website, click on a
plug-in you want (https://neuraldsp.com/products/), select
“add to cart”, and complete the steps for purchase.
After that, please follow these steps:
· Please make sure you have the latest iLok License Manager
application installed and running. (https://www.ilok.
com/#!license-manager)
NEURALDSP.COM
GETTING STARTED NEURAL DSP // NOLLY ARCHETYPE
NEURALDSP.COM
GETTING STARTED NEURAL DSP // NOLLY ARCHETYPE
Including:
· Compressor Pedal
· Overdrive - 1 Pedal
· Delay -1 (Mono) Pedal
· Overdrive - 2 Pedal
· Clean Amplifier
· Crunch Amplifier
· Rhythm Amplifier
· Lead Amplifier 7
· Graphic EQ
· Neural Cab Sim x4 The first section consists of four effects in series, which can
· Delay - 2 (Stereo) Pedal be used separately or combined.
· Reverb Pedal
COMPRESSOR PEDAL
COMPRESSION KNOB: The amount of gain reduction is
determined by this knob. Make up gain is included in this
parameter.
GAIN KNOB: You can adjust the output signal and
compensates for an eventual volume-loss caused by the
compression.
ATTACK SWITCH: You can adjust the attack speed between
Smooth (Slow) and Snappy (Fast).
NEURALDSP.COM
GETTING STARTED NEURAL DSP // NOLLY ARCHETYPE
STOMP BYPASS SWITCH: Press to activate. This will turn SYNC SWITCH: Determines if the delay time is set according
on the compressor. to plugin/DAW tempo or manually.
MINI SCREEN: Displaying time and subdivision values.
OVERDRIVE - 1 PEDAL STOMP BYPASS SWITCH: Press to activate. This will turn
DRIVE KNOB: Adjust the amount of Gain the pedal will on the Delay and let it process your signal.
boost out to the head.
TONE KNOB: The tone knob controls the treble frequencies. OVERDRIVE - 2 PEDAL
Increase it and you let all the treble frequencies through, GAIN KNOB: Adjust the amount of Gain the pedal will
set it to 0 and it cuts a decent amount of treble and even boost out to the head.
some high mids. TREBLE KNOB: The treble knob controls the treble
LEVEL KNOB: Controls the overall volume of the pedal. frequencies. Increase it and you let all the treble frequencies
STOMP BYPASS SWITCH: Press to activate. This will turn through, set it to 0 and it cuts a decent amount of treble 8
on the overdrive and let it process your signal. and even some high mids.
BASS KNOB: This knob controls the amount of bass
DELAY - 1 PEDAL frequencies.
MIX KNOB: Controls the amount of effect that is added to VOLUME KNOB: Controls the overall volume of the pedal.
the original dry input signal. STOMP BYPASS SWITCH: Press to activate. This will turn
TIME KNOB: Sets the delay time in subdivisions. From 1/64T on the overdrive and let it process your signal.
to 1/1D.
FEEDBACK KNOB: Sets the amount of delay returned to
the input of the delay line. The higher the setting the more
repeats.
TONE KNOB: Controls the frequency range of the low pass
filter.
NEURALDSP.COM
GETTING STARTED NEURAL DSP // NOLLY ARCHETYPE
9
Bright Switch: The signal is very warm, bouncy, and possess BRIGHT SWITCH: The signal is very warm, bouncy, and
tremendous sparkle, which is further enhanced with the possess tremendous sparkle, which is further enhanced
Bright Switch. with the Bright Switch.
GAIN KNOB: Controls the amount of Gain in the preamp GAIN KNOB: Controls the amount of Gain in the preamp
section. section.
BASS/MID/TREBLE KNOBS: Tone stack of the amp. 3 band BASS/MID/TREBLE KNOBS: Tone stack of the amp. 3 band EQ.
EQ. PRESENCE KNOB: Is used to boost the upper midrange
MASTER KNOB: Controls the overall volume of the amp. and treble frequencies.
LEVEL KNOB: This knob determines the output level of the DEPTH KNOB: Is used to boost the lower midrange and
amp. Is useful to match the amplifiers when you are using bass frequencies.
the same cab for all the amps. MASTER KNOB: Controls the overall volume of the amp.
ON/OFF SWITCH: This switch bypass your signal, as the LEVEL KNOB: This knob determines the output level of the
amp would be off. amp. Is useful to match the amplifiers when you are using
NEURALDSP.COM
GETTING STARTED NEURAL DSP // NOLLY ARCHETYPE
the same cab for all the amps. the same cab for all the amps.
ON/OFF SWITCH: This switch bypass your signal, as the ON/OFF SWITCH: This switch bypass your signal, as the
amp would be off. amp would be off.
10
GAIN KNOB: Controls the amount of Gain in the preamp GAIN KNOB: Controls the amount of Gain in the preamp
section. section.
BASS/MID/TREBLE KNOBS: Tone stack of the amp. 3 band EQ. Bass/Mid/Treble Knobs: Tone stack of the amp. 3 band EQ.
MASTER KNOB: Controls the overall volume of the amp. MASTER KNOB: Controls the overall volume of the amp.
RESONANCE KNOB: Is used to boost the lower midrange LEVEL KNOB: This knob determines the output level of the
and bass frequencies. amp. Is useful to match the amplifiers when you are using
PRESENCE KNOB: Is used to boost the upper midrange the same cab for all the amps.
and treble frequencies. ON/OFF SWITCH: This switch bypass your signal, as the
LEVEL KNOB: This knob determines the output level of the amp would be off.
amp. Is useful to match the amplifiers when you are using
NEURALDSP.COM
GETTING STARTED NEURAL DSP // NOLLY ARCHETYPE
11
High-fidelity Graphic EQ that allows you to see graphically We have designed 4 Cabinets for this plugin. It includes four
and control individually a number of different frequency microphones with a range of different positions.
bands. We include four of them.
ON/OFF SWITCH: You can turn ON/OFF the EQ filter. POSITION SLIDER: Controls where the Microphone is,
EQ BANDS: Bank of 9 sliders controls used to boost or cut meaning from the Center of the Cone, to the Edge of the
frequency bands. Cone. (Disabled when loading external IR file).
NEURALDSP.COM
GETTING STARTED NEURAL DSP // NOLLY ARCHETYPE
DISTANCE SLIDER: Controls the Distance of the Mic TIME EFFECTS SECTION
between close to the Cab and Far towards the Room.
(Disabled when loading external IR file).
MIC LEVEL: Controls the level of the selected impulse.
PAN: Controls the output panning of the selected impulse.
PHASE INVERTER SWITCH: Inverts the phase of the loaded
impulse.
ON/OFF SWITCH: Disables or Enables the respective IR
loader Section.
IMPULSE LOADER SELECTOR BOX: Drop down menu for
selecting factory Microphones and loading your own IR
files. The folder path will be saved, then you can navigate DELAY - 2 PEDAL 12
through them by clicking left/right navigation arrows. MIX KNOB: Controls the amount of effect that is added to
DRAG TO POSITION: This feature refers to clicking on the the original dry input signal.
Microphone, will allow you to position the Microphone FEEDBACK KNOB: Sets the amount of delay returned to
within the Cone area. The values will be reflected on the the input of the delay line. The higher the setting the more
Position and Distance sliders and vice versa. repeats.
MOD KNOB: Control the amount of pitch modulation.
TEMPO KNOB: Adjust the BPM (Beats Per Minute).
TIME KNOB: Sets the delay time in subdivisions. From 1/64T
to 1/1D.
LOW CUT KNOB: Controls the frequency range of the high
pass filter.
HIGH CUT KNOB: Controls the frequency range of the low
pass filter.
NEURALDSP.COM
GETTING STARTED NEURAL DSP // NOLLY ARCHETYPE
MOD SWITCH: Adds pitch modulation to the delay repeats. PLUGIN GLOBAL FEATURES
PING PONG SWITCH: Turn ON/OFF the ping pong delay
effect.
SYNC SWITCH: Determines if the delay time is set according
to Plugin/DAW tempo or manually.
SCREEN: Displaying settings, time and subdivision values. DEVELOPED BY NEURAL DSP: Click on it to reveal
STOMP ENGAGE SWITCH: Press to activate. This will turn additional info about this product.
on the Delay and let it process your signal. INPUT AND OUTPUT GAIN KNOBS: Input will affect on
STOMP TAP TEMPO SWITCH: Controls the delay time by how much signal the plugin will feed in. This will affect the
clicking. Delay Time is set as the interval between the last amount of distortion range of the Gain pots in the Head
two clicks on the pad. and Booster Gain knob. Adjust according to your purposes
and input signal levels. The output will affect on how much 13
REVERB PEDAL signal the plugin will feed out to your DAW channel. Meters
MIX KNOB: Controls the amount of effect that is added to will show if input or output signal are clipping by holding a
the original dry input signal. gray indicator for 3 seconds.
DECAY KNOB: Sets the duration of the reverb decay GATE KNOB: Attenuates the input signal below the
envelope. Use it to adjust how quickly your sound dissipates. threshold.
LOW CUT KNOB: Controls the frequency range of the high STEREO SIGNAL PROCESSING SWITCH: Original hardware
pass filter. has the power to process only a mono input signal. With the
HIGH CUT KNOB: Controls the frequency range of the low Stereo switch, you are able to process a Stereo input signal.
pass filter. Ideal for running stereo Guitar tracks or experimenting.
STOMP BYPASS SWITCH: Press to activate. This will turn QUALITY SWITCH: Changes the quality with which the
on the Reverb and let it process your signal. plugin will process the signal, based on different levels
of oversampling (2x Normal and 4x High). The higher the
quality, more processing CPU power needed.
NEURALDSP.COM
PLUGIN FEATURES NEURAL DSP // NOLLY ARCHETYPE
PRESETS
NEURALDSP.COM
PLUGIN FEATURES NEURAL DSP // NOLLY ARCHETYPE
DROPDOWN MENU: The arrow on the right side of the list MIDI SETUP
displays a list of presets included by factory, artists and the Archetype Nollyfeatures MIDI support. Please, check the
ones created by the user. following steps to assign MIDI controls to plugin parameter/
UI components.
Where are my presets located?
Windows: C:/ ProgramData / Neural DSP / Archetype Nolly Mapping MIDI note event to Buttons:
Mac OSX: HD / Library / Audio / Presets / Neural DSP / · Enable MIDI Learn from the right click menu.
Archetype Nolly · Click on the component you want to control.
· Press down MIDI note on the MIDI controller and release it.
Custom Folders · Disable MIDI Learn from the right click menu.
· Now mapped MIDI note will toggle the parameter value.
15
Mapping two MIDI notes to a Slider/Combobox:
· Enable MIDI Learn from the right click menu.
· Click on the component you want to control.
· Press down the first MIDI note on the MIDI controller.
· Press down the second MIDI note on the MIDI controller.
You can create folders to organize your presets under the · Release the first MIDI note.
main directory. The dropdown menu will be updated the · Release the second MIDI note.
next time you open Archetype Nolly. · Disable MIDI Learn from the right click menu.
· Now the two mapped MIDI notes can be used to increment/
decrement the parameter value.
NEURALDSP.COM
PLUGIN FEATURES NEURAL DSP // NOLLY ARCHETYPE
· Click on the component you want to control. Mapping MIDI Program Change event to Buttons:
· Press down MIDI CC shortcut on the MIDI controller and · Enable MIDI Learn from the right click menu.
release it. · Click on the component you want to control.
· Disable MIDI Learn from the right click menu. · Press down MIDI Program Change twice shortcut on the
· Now mapped MIDI CC event will toggle the parameter value. MIDI controller.
· Disable MIDI Learn from the right click menu.
Mapping MIDI CC event to a Slider/Combobox: · Now mapped MIDI Program Change event will toggle the
Enable MIDI Learn from the right click menu. parameter value.
Click on the component you want to control.
Move CC knob on the MIDI controller. Mapping two MIDI Program Change events to a Slider/
Disable MIDI Learn from the right click menu. Combobox:
Now mapped MIDI CC event will control the parameter value. · Enable MIDI Learn from the right click menu. 16
· Click on the component you want to control.
Mapping two MIDI CC events to a Slider/Combobox: · Press down the first MIDI Program Change button on the
· Enable MIDI Learn from the right click menu. MIDI controller.
· Click on the component you want to control. · Press down the second MIDI Program Change button on
· Press down the first MIDI CC button on the MIDI controller. the MIDI controller.
· Press down the second MIDI CC button on the MIDI controller. · Disable MIDI Learn from the right click menu.
· Release the first MIDI CC button. · Now the two mapped MIDI Program Change events can be
· Release the seconds MIDI CC button. used to increment/decrement the parameter value.
·Disable MIDI Learn from the right click menu.
· Now the two mapped MIDI CC events can be used to All those MIDI Events will be registered on the MIDI Mapping
increment/decrement the parameter value. window. You can open it and edit all the parameters by
clicking on the MIDI port icon on the bottom left corner
of the plug-In. You can add new MIDI events manually by
clicking on the “+” button.
NEURALDSP.COM
PLUGIN FEATURES NEURAL DSP // NOLLY ARCHETYPE
ARCHETYPE NOLLY GUI BASICS turn a knob or slider left or anticlockwise click on the knob
with the mouse and slide the cursor down.
Archetype Nolly feature knobs, sliders and switches within
the Graphic User Interface (also known as GUI). These Returning a knob or slider to its Default Value
resemble the ones in the physical analog hardware with To return to the knobs or sliders “default values”, please
added control. double click on them.
NEURALDSP.COM
SUPPORT NEURAL DSP // NOLLY ARCHETYPE
NEURALDSP.COM
SUPPORT NEURAL DSP // NOLLY ARCHETYPE
19
NEURALDSP.COM