Professional Documents
Culture Documents
Te c h n i c a l d a t a
Filter housing (Materials)
• Head: Aluminium
• Bypass valve: Nylon - Steel
• Element: Zinc-Plated Steel, Painted Steel
Pressure
• Working pressure: 12 bar (1,2 MPa)
Temperature
• From -20°C to +110°C
MPS 100 - 150 - 200 - 250 - 300 - 350
Bypass valve In-Line/Return - Setting 1,75 bar
• Return filter opening pressure: 1,75 bar ±10% 3
• Suction filter opening pressure: 30 kPa ±10%
Δp Elements type
2
• Δp: 5 bar
Δp bar
• MPS250 4,60
• MPS300-301 5,30 40
• MPS350-351 6,00
0
Filter housings Δp pressure drop 0 22 44 66 88 110
The curves are plotted utilising mineral oil
Flow rate l/min
with density of 0,86 kg/dm3 to ISO 3968.
2 80
Δp kPa
Δp bar
1 40
0 0
0 24 48 72 96 120 0 30 60 90 120 150
Flow rate l/min Flow rate l/min
260
F i lt e r siz i ng
In-Line/Suction Filter
The following filter sizing recommendations are based using a mineral oil fluid at 30/46/68 mm2/s (cSt) with a maximum total filter
assembly (housing and filter element) of 10 kPa (0,1 bar).
In-Line/Return Filter
The following filter sizing recommendations are based using a mineral oil fluid at 30/46/68 mm2/s (cSt) with a maximum total filter
assembly (housing and filter element) of 50 kPa (0,5 bar).
MPS 050 - 051 MPS 070 - 071 MPS 100 - 101 MPS 150 - 151
mm2/s (cSt) mm2/s (cSt) mm2/s (cSt) mm2/s (cSt)
32 46 68 32 46 68 32 46 68 32 46 68
MPS 200 MPS 250 MPS 300 - 301 MPS 350 - 351
SPIN-ON FILTER - LOW PRESSURE
A03 165 125 90 A03 235 195 150 A03 165 125 90 A03 235 195 150
A06 210 170 125 A06 250 210 165 A06 210 170 125 A06 250 210 165
A10 250 210 165 A10 280 245 200 A10 250 210 165 A10 280 245 200
A25 320 295 260 A25 335 310 280 A25 320 295 260 A25 335 310 280
P10 300 270 230 P10 315 285 250 P10 300 270 230 P10 315 285 250
P25 330 310 280 P25 350 330 300 P25 330 310 280 P25 350 330 300
M25 360 345 325 M25 365 360 345 M25 360 345 325 M25 365 360 345
Flow rate l/min Flow rate l/min Flow rate l/min Flow rate l/min
261
MPS 050 / 070 MPS 100 / 150
133
16 35
95
23
30
13 23
IN OUT
17
22
IN OUT
H
H
CS CG CS CG
Filter Filter
Filter Filter
element element
element element
Ø 96 Ø 129
H1
H1
E
Nr. 2 holes
E
Nr. 2 holes
Ø 134
Ø 75
38
59
38
50
52
94
T - Indicator port
for Return filter T - Indicator port
for Suction filter T - Indicator port
for Return filter
T - Indicator port
for Suction filter
SPIN-ON FILTER - LOW PRESSURE
MPS
050 - 070 - 100 - 150 Thread connections
Length H H1 E E
Filter mm mm Size Size Depth 12 mm Depth 15 mm
Type T
050 192 30 MPS 050 - 070 MPS 100 - 150 MPS 050 - 070 MPS 100 - 150
070 254 30 G1 G 3/4” G 1 1/4” G 1/8” M6 M8
100 245 50 G2 3/4” NPT 1 1/4” NPT 1/8” NPT 1/4” UNC 5/16” UNC
150 291 50 G3 SAE 12 - 1 1/16” - 12 UN SAE 20 - 1 5/8” - 12 UN 1/8” NPT 1/4” UNC 5/16” UNC
G4 SAE 8 - 3/4” - 16 UNF - 1/8” NPT 1/4” UNC -
G5 G 1” - G 1/8” M6 -
G6 1” NPT - 1/8” NPT 1/4” UNC -
262
MPS 051 / 071 MPS 101 / 151
133
30
95
IN OUT
22
IN OUT
H
H
CS CG CS CG
Filter Filter Filter Filter
element element element element
Ø 96 Ø 129
H1
H1
28
24 Indicator
Indicator port
port
28,5
32
Ø 134
Ø 75
38
50
MPS
051 - 071 - 101 - 151 Thread connections
Length H H1 E E
Filter mm mm Size Size Depth 12 mm Depth 15 mm
Type
051 192 30 MPS 051 - 071 MPS 101 - 151 MPS 051 - 071 MPS 101 - 151
071 254 30 G1 G 3/4” G 1 1/4” M6 M8
101 245 50 G2 3/4” NPT 1 1/4” NPT 1/4” UNC 5/16” UNC
151 291 50 G3 SAE 12 - 1 1/16” - 12 UN SAE 20 - 1 5/8” - 12 UN 1/4” UNC 5/16” UNC
G4 SAE 8 - 3/4” - 16 UNF - 1/4” UNC -
G5 G 1” - M6 -
G6 1” NPT - 1/4” UNC -
263
MPS 200 - 250
H1
H
46
T - Indicator port T - Indicator port
for Return filter for Suction filter
IN OUT
75
H
CS CG
Filter Filter
element element
Ø 129 140
H1
70
E
Nr. 2 holes
65
SPIN-ON FILTER - LOW PRESSURE
264
MPS 300 - 350 MPS 301 - 351
E E
Nr. 3 holes Nr. 3 holes
284 284
150 150
48
H
CS CG H CS CG
Filter Filter Filter Filter
element element element element
Ø 129 Ø 129
H1
H1
Indicator port
159 T2 Plug - A/F 30
T - Indicator port Optional
T - Indicator port
for Suction filter OUT for Return filter OUT
44
130
130
60
60
54
IN IN
T - Indicator port
T - Indicator port for Return filter
for Suction filter 186
MPS 300 - 350 Thread connections MPS 301 - 351 Flange connections
E E
Type Size T Depth 15 mm Type Size T Depth 15 mm
G1 G 1 1/2” G 1/8” M10 F1 1 1/2” SAE 3000 psi/M G 1/8” M10
G2 1 1/2” NPT 1/8” NPT 7/16” UNC F2 1 1/2” SAE 3000 psi/UNC 1/8” NPT 7/16” UNC
G3 SAE 24 - 1 7/8” - 12 UN 1/8” NPT 7/16” UNC
265
Filter element
CS - CG - CW
CW:
This series of canister removes water from oil while filtering the oil at
the same time.
Water absorbent polymers up to 800 times their own weight, provide Head MPS 050 - 070
this major feature.
Water holding
capacities
CW CG/CW CS
1” - 12 UNF G 3/4”
30/46 mm2/s (cSt) good
Viscosity
> 46 mm2/s (cSt) poor
40/60 °C good
Temperature CG/CW CS
< 30 °C poor 1 1/2” - 16 UN G 1 1/4”
266
Or der ing i nfor mati on MP S
Filter assembly 2 3 4 5 6 7
MPS
Example 1: MPS 050 R G3 P25 A P01
Example 2: MPS 101 U G1 M60 A P01
Filter element 1 2 5 6 7
CS
Example 1: CS 050 P25 A P01
Example 2: CS 100 M60 A P01
1 - Filter element 5 - Filter element
CS Filter element European std. A03 Inorganic microfibre 3 μm Absolute filtration
CG Filter element USA std. A06 Inorganic microfibre 6 μm Inorganic
Microfibre
CW Water retention A10 Inorganic microfibre 10 μm
A25 Inorganic microfibre 25 μm ßx (c) ≥ 1000
2 - Style
Filter: M25 Wire mesh 25 μm
Nominal
Series 0* Series 1* Filter element M60 Wire mesh 60 μm Filtration
M90 Wire mesh 90 μm
050 051 050
070 071 070 P10 Resin - Impregnated paper Nominal
P25 Resin - Impregnated paper Filtration
100 101 100
150 151 150
6 - Filter seals
200 100 x 2 elements
250 150 x 2 elements A NBR
300 301 100 x 2 elements 7 - Option
350 351 150 x 2 elements
P01 MP Filtri standard
3 - Valves
Series 0*
*Series “0”:
R With bypass 1,75 bar ±10% Connections for Suction and
S With bypass 30 kPa ±10% Return indicator included.
(only for Suction filter)
*Series “1”:
U Without bypass
Connection for differential indicator.
Series 1*
R With bypass
P Without bypass
4 - Connections
Threaded
MPS - CS element MPS - CG element MPS - CS element MPS - CS element
050 - 051 - 070 - 071 050 - 051 - 070 - 071 100 - 101 - 150 - 151 200 - 250 - 300 - 301 - 350 - 351
Type Size Type Size Type Size Type Size
G1 G 3/4” U1 G 3/4” G1 G 1 1/4” G1 G 1 1/2”
G2 3/4” NPT U2 3/4” NPT G2 1 1/4” NPT G2 1 1/2” NPT
G3 SAE 12 - 1 1/16” - 12 UN U3 SAE 12 - 1 1/16” - 12 UN G3 SAE 20 - 1 5/8” - 12 UN G3 SAE 24 - 1 7/8” - 12 UN
SPIN-ON FILTER - LOW PRESSURE
MP Filtri - The filter functions as described in this bulletin are valid exclusively for original MP Filtri
filter elements and replacement parts. All rights reserved.
The data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or commercial requirements.
The colours of the products shown on the cover are purely guideline. Copyright. All rights reserved.