MAIN GROUP 6
MAIN MACHINERY COMPONENTSPO0-7280
[i Rolls-Royce Rev. 2, 07.11.00
Page 6.2
MAIN GROUP 6
MAIN MACHINERY COMPONENTS.. coseeeeeee
‘MAIN GROUP 6 - MACHINERY MAIN COMPONENTS.
General
60 DIESEL ENGINE FOR PROPULSION vss
Propulsion configuration
601 Main diesel enginets
SPARE PAIS nner
63 TRANSMISSIONS.
634 Controllable pitch propeller plant.
Propeller shaft Brackets. o
El. remote contral
Spare pat tenner
637 Main Gear with Thrust Bearings, Couplings
64 BOILERS, STEAM AND GAS GENERATORS
648 Hot water boiler. i
65 GENERATORS SETS FOR MAIN EL. PRODUCTION
651 Aux, el,generator sets for main el production
66 OTHER AGGREGATES AND GENERATORS FOR MAIN AND.
EMERGENCY ELECTRIC POWER PRODUCTION,
665 Emergency generator set
667 — Shaft generators
Rolls-Royce Marine AS
Ship Technology - Offshore
P.O Box 160, N-6067 Usteinvik, Norway
Tet: #477901 4000. Fe #47 7001 4031
Enterprise number NO 880 371379P00-7280
Rolls- Royce Rey. 2, 07.11.00
Page 6.3
MAIN GROUP 6 - MACHINERY MAIN COMPONENTS
General
The components installed are to be designed for operation under conditions as follows :
Seawater temperature max.: 32 degrees C. Ambient air temperature between 5 degrees C
and 55 degrees C.
Components make : Ref. separate makers list.
Care is to be taken in construction of foundations in order to obtain rigid supports not
inducing further distribution of vibration. The machinery to be installed on solid steel to be
delivered with spare parts and certificates according to the Class requirements where
nothing else is stated.
For major machinery components such as propulsion machinery, shaft bearings and deck
machinery, hardened epoxy type "Chockfast” orange to be used for chocking,
For machinery, instruction material in triplicate to be delivered in English.
‘The main engines, aux. engines, emergency gen.set and hot water boiler to be arranged for
fuel oil according to British Standard MA 100, Class M1
Rolls-Royce Marine AS
Ship Technology - Offshore
P.O Box 160, N-6067 Ulsteinvik, Norway
Tel: +4770 01 4000, Fax: +47 7001 4031
Enterprise number NO 980 371 379P00-7280
Rolls- Royce Rev. 2, 07.11.00
Page 64
DIESEL ENGINE FOR PROPULSION
Propulsion configuration
The vessel to be propulsioned by diesel engine(s) engaged on main gearboxes.
601 Main diesel engine(s)
Number of engines : 2x Rolls-Royce Marine AS, Engines - Bergen BRM-8
Engine output approx. 2x 3530 kW (Total 9600 Hk)
Engine r-p.m. : 750 rpm.
Fuel Gas oil
Flywheel end drive Att
(For system description, ref. item 70).
Turning gear, el. or pneumatic driven to be arranged.
Spare parts
Spare parts to the machinery according to Class and authorities’ requirements. for
unrestricted trade to be delivered.
Spareparts to be included:
Toff Cylinder head complete.
Loff Cylinder Liner.
1 off Piston complete with connecting rod assembly, bolts and bearings.
Joff Starting air valve assembly.
4 off Inlet and Exhaust valve assembly complete with springs/rotor caps.
1off Fuel Injection Pump.
1 off Complete set of spare injectors.
J off Set main gears (forward).
1 off Set main bearings, bolts and shell.
1 off Set Camshaft drives and gears.
Loff Set Minor Joints and service joint sets for complete main engine.
Rolls-Royce Marine AS
Ship Technology - Offshore
P.O Box 160, N-6067 Ulsteinvik, Norway
Tel: + 47 7001 4000 Fax: +87 7001 4031
Enterprise number NO 980 371 379,634
637
P00-7280
Rol Is-Royce Rey. 2, 07.11.00
Page 6.5
TRANSMISSIONS
Controllable pitch propeller plant
Make : Ulstein 1500 AGSC ~ KP1S
Number of propellers z2
‘Number of blades : 4 each propeller, Ni-Al-Bronze
Propeller diameter : Approx. 3300 mm
Propeller speed : 180 RPM approx.
Propeller to rotate outboard on top.
Propeller shaft Brackets
Propeller shaft brackets to be made of welded steel of adequate dimensions and to be well
supported in hull constructions to prevent vibrations.
Coper roller bearings or similar type with temp. sensors to be provided.
EL. remote control
Electronic remote control, ref. item 79.
Spare parts
Spare parts which cover the Classification Society's requirements for unrestricted service
to be delivered.
Main Gear with Thrust Bearings, Couplings
2off Ulstein Propeller reduction gears to be delivered and installed.
Type 1500 AGSC - KP - IS
Engine speed _: Approx. 750 RPM
Propeller speed _: 180 approx at engine speed 750 RPM
The reduction gears to be equipped with single step primary PTO for shaftgenerator 1800
RPM, approx. 1800 kW, built-on servo and lub. oil pump, lub. oil cooler and lub. oil
duplex filter. An el.driven st.by lub. oil/servo oil pump to be installed for each gear.
‘The reduction gears to be equipped with built in hydraulic clutch and thrust bearing.
Rolls-Royce Marine AS
Ship Technology - Offshore
P.O.Bo« 160, N-6067 Usteinvik, Norway
Tel: + 477001 4000, Fax 4770014031
Enterprise number NO 980371 379P00-7280
RA Rolls-Royce Rev. 2, 07.11.00
Page 6.6
64 BOILERS, STEAM AND GAS GENERATORS
648 Hot water boiler
Automatic hot water boiler to be installed. The boiler to be equipped with automatic oil
burner and electric heating elements.
Capacity of boiler 250,000 keal/h.
El. heating elements 22x 10kW.
Fuel : Gas oil.
Circulation pumps, hot water pump and expansion tank to be installed.
The boiler to supply hot water to AC plant and for domestic use.
Rolls-Royce Marine AS
Ship Technology - Offshore
P.O Box 160, N-6067 Uisteinvik, Norway
Tel: + 47 7001 4000. Fax: +47 7001 40:31
Enterprise number NO 980 371 379P00-7280
IR} Rolls-Royce Rev. 2, 07.11.00
Page 6.7
65 GENERATORS SETS FOR MAIN EL. PRODUCTION
651 Aux. el.generator sets for main el.production
‘The vessel to be equipped with diesel engine driven el. generator set.
Number of sets 12
Generator output approx. (kW) : 300 (375 kVA)
Voltage (Vv) :450
Frequency :
RPM
Generator coolant :
Diesel engine fuel : Gas oil ISO 8217
‘The generator sets is to be connected to main switchboard, and to be flexible mounted to
the vessels structure.
The gen.sets to have built on F.W., L.O. and F.O. system and is to be cooled in main
engines LT circuit
Engine's governor system to be electronic with load sharing module.
The diesel engines to have built on still stand heater, the generators to have built on anti-
condensation heater.
The aux. engines to be remote operated from ECR.
Rolls-Royce Marine AS
Ship Technology - Offshore
P.O Box 160, N-6067 Uisteinvik, Norway
Tel: +47 7001 4000, Fax: +47 7001 40°31
Enterprise number NO 980 371 379P00-7280
[RI Rolls-Royce Rev, 2, 07.11.00
Page 68
66 OTHER AGGREGATES AND GENERATORS FOR MAIN AND
EMERGENCY ELECTRIC POWER PRODUCTION
665 Emergency generator set
One (1) off radiator cooled emergency generator set to be installed.
Output approx (kW) :70
Voltage (Vv) 3430
Frequency (Hz) :60
RPM 1800
Temerature class F
Enclosure 1P23
Generator coolant Air cooled with fine grade filters
Engine fuel Gas oil ISO 8217
‘The diesel engine to have built-on still stand heater, the generator to have built-on anti-
condensation heaters
The diesel engine to have two (2) el. start systems.
Rolls-Royce Marine AS
Ship Technology - Offshore
P.O.Box 160, N-6067 Ulsteinvik, Norway
Tel: + 47 7001 4000, Fax: +47 70001 4031
Enterprise number NO 980 371 379P00-7280
i Rolls-Royce Rev. 2, 07.11.00
Page 6.9
667
Shaft generators
To each main reduction gear is connected, via flexible coupling, one generator 1800 RPM
ata main engine speed of 750 RPM.
Capacity each 21920 kW /2400 KVA.
Voltage 450V
Frequency 60 Hz.
RPM 1800 RPM
Temperature class F
Enclosure Ipaa
The generators to be freshwater cooled in main engine(s) FW LT circuit with double tube
coolers.
The shaft generator to be equipped with:
Anti condensation heaters
Excitation equipment (AVR)
Winding temperature sensors
Bearings temperature sensors
Cooler leakage detector
Hatches for emergency air cooling
Transformers for differential protection
UUdNUUY
Special attention to be paid during selection of generators with regards to reduce the
voltage drop during start of thrusters.
Rolls-Royce Marine AS
Ship Technology - Offshore
POBox 160, N-4067 Ulsnvik, Norway
Tek: #47 7001 4000, Fa: #47 70014031
Enterprise number NO 98071 373