Professional Documents
Culture Documents
Due to this resonating current, the current through main thyristor T1 at any
instant of time is equal to the sum of load current I0 and ic i.e. (I0+ic). The
waveform of resonating current and voltage across the capacitor is shown below:
Now, we want to turn off main thyrsistor T1. We will we do? The auxiliary thyristor
TA is fired at t=t1. As soon as auxiliary thyristor TA gets ON, a sudden reverse
voltage equal to the capacitor voltage is impressed across the main SCR T1. Due to
this, the current through main SCR reverses momentarily to recover the stored
charges. Due to this recovery of stored charges, the current through the main SCR
T1 gets quenched and it gets turned OFF.
= -vc
= -ic
Negative sign is used for voltage and current as it is opposite to the reference
direction shown in circuit diagram. Circuit turn off time is tc.
Class-D commutation is also known as Auxiliary Commutation due to the fact that
Auxiliary Thyristor is used for the commutation of main thyristor. When auxiliary
thyristor is ON, capacitor gets connected across the terminals of main thyristor,
therefore this method of commutation is also called Parallel Capacit
or Commutation.
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
Commutation de classe D - Commutation d'impulsion du thyristor
21 avril 2019 par administrateur
La commutation de classe D est une méthode de commutation utilisée pour désactiver
le thyristor dans un circuit CC par l'application d'une tension inverse soudaine
aux bornes du SCR. C'est la raison, on l'appelle aussi Impulse Commutation.
Tension aux bornes du thyristor principal VT1 = Tension aux bornes du condensateur
= -vc
= -ic
Le signe négatif est utilisé pour la tension et le courant car il est opposé à la
direction de référence indiquée dans le schéma de circuit. Le temps d'arrêt du
circuit est tc.