‘Al dimensions ore in milimetres
Unless otherwise stated,
FOR CABLE SIZES UP TO 10.0mm* (TYPE 73) — OVER 10.0mm* (TYPE Ta)
2. Al terminations shall comply fully
with the Model Contract. Document
for ‘Highway Works. (MCDHW)
Specification
3.All BS 88 fuses shall be rated in
‘accordance with the. equipment
manufacturer's requirements.
4.For ‘warning’ label details see
rg No [SDZ72/70)
5.For source/destination label detail
see Drg No [SDZ14/3
6.All equipment shal be fixed to
the ‘backboard using stainless
steel screws
Backboard
Warring Label ‘o'
Cutout unit with double pole
isolation switch ond 1 No’ BS 88
fused out-going circuits
8 way brass earth block
Extension box with terminal
blocks
mm brass gland plate fitted with
brass tubes complete with worm
drive clips
Destination Label
Source Label saa Cables cleated to backboard
Ground Level
STANDARD DRAWING STREET LIGHTING | SD/14/14 APR 2007
=ssa" | CABLE TERMINATION TYPE T3 AND T4 =