Professional Documents
Culture Documents
Highlights
• Cost-effective standalone
switches for edge, branch and
small site deployments
• 8-port and 24-port Gigabit
Ethernet connectivity
• 4 x 1Gb/2.5Gb* Ethernet uplink ports
• PoE/PoE+ models for powered
connection of edge devices
• Fanless models for silent operation –
ideal for classrooms, offices or
retail locations
• System that can draw power from an
upstream PoE switch – eliminating
ExtremeSwitching™ X435 Series
need for a separate PSU Economical Edge Switches for Distributed Enterprises,
• Non-blocking, wire-speed design Branches and Small Sites
Smart Management Choices
The ExtremeSwitching X435 Series are economical, standalone Ethernet
• ExtremeCloud™ IQ for powerful,
switches suited to the needs of cost-conscious enterprises looking for a
simple and secure public or private
cloud management value-based edge solution. Powered by Extreme Networks ExtremeXOS,
the X435 Series offers comprehensive Layer 2 switching, static routing,
• ExtremeCloud IQ – Site Engine
advanced PoE, role-based policy and comprehensive security services.
for centralized, on-premises
This makes it ideal for enterprises looking for cost-effective Ethernet
management capabilities
connectivity in their branch/small sites or at their network edge.
The family also includes an 8-port model supporting PoE pass-through that
can draw power from an upstream PoE switch while providing up to 100W
of downstream PoE to connected Ethernet devices.
2.5Gb uplink support is a future capability
*
WWW.EXTREMENETWORKS.COM 1
Flexible PoE Fabric Attach
The X435 Series provides standards-based IEEE Fabric Attach on the X435 can be used to automate the
802.3at 30W access ports, as well as IEEE 802.3bt connection to Extreme’s campus-based Fabric Connect
60W/90W uplink ports on the X435-8P-2T-W model. solution. Fabric Attach provides zero-touch edge
PoE eliminates the need for additional electrical provisioning and allows the X435 to take advantage of
cabling and circuits otherwise needed to power edge the virtualized services and inherent security capabilities
devices, such as IP phones or wireless APs. The X435 of the Extreme Fabric Connect infrastructure.
Series also provides the following capabilities to
address the unique needs of powered edge devices:
• Perpetual PoE which enables PoE power to be
maintained during a switch re-start, preventing
attached IoT devices from being disrupted or
rebooted during the switch reset.
• Fast PoE which enables power to be supplied
to connected edge or IoT devices before switch Role-Based Policy
boot-up completion, speeding the time for The X435 supports role-based policies centrally
powered end-points to start up. administered through the ExtremeControl policy
manager. This policy framework empowers network
administrators to define distinct roles or profiles
to represent specific operational groups that may
exist in an enterprise. Each defined role can then be
granted individualized access to specific network
PoE Power from Upstream Switch services or applications – and these access privileges
remain associated with users as they move across
The X435-8P-2T-W model draws all its required
both wired and wireless network access points.
power from an upstream switch over its two Ethernet
IEEE 802.3bt Type 4 (30W/60W/90W) links. This
eliminates the need for a separate power supply
unit, while still enabling the delivery of downstream
PoE power. By drawing power over both 90W
uplinks, the X435-8P-2T-W can deliver up to 100W of
downstream PoE power.
Management
The X435 Series can be managed in a variety of ways.
Simple on-box management functions are delivered
by a web-based GUI and a generic CLI is available for
manual configuration.
WWW.EXTREMENETWORKS.COM 2
Product Specifications
Performance and Scaling
Max Active Max Active Aggregated Switch Frame
Switch Model
10/100/1000BASE-T Ports 1Gb/2.5Gb* SFP Ports Bandwidth Forwarding Rate
X435-8T-4S 8 4 36 Gbps 26.8 Mpps
External Ports/Slot
• 8 x 10/100/1000BASE-T ports
• Full / Half-Duplex (auto-sensing)
X435-8T-4S • 4 x 1/2.5GBASE-X SFP uplink ports* (unpopulated)
• 1 x Serial (console port RJ-45)
• 1 x USB A port for external USB flash
WWW.EXTREMENETWORKS.COM 3
Weights and Dimensions
1
Includes maximum PoE load (W) through the switch
2
Does not include PoE load heat dissipated through external electronic load
X435-8P-4S 124W
X435-8P-2T-W 100W3
X435-24P-4S 370W
3
Maximum supplied PoE power when drawing power over 2 x 90W PoE input links. See PoE Power Budget Values table for other X435-8P-2T-W
configurations and respective PoE budget values.
2 x 90W 100W
1 x 90W 45W
2 x 60W 65W
1 x 60W 25W
2 x 30W 25W
1 x 30W 0W
4
From an upstream X465 (or equivalent) PoE switch
1100W (1/2 of
X435-24P-4S 25C 370W 45% 45.4 56
max POE power
Note: Acostic noise levels show here represent noise emitted by the switch at room ambient temperatures. Normal operating temperatre range: 0˚C to 45˚C.
WWW.EXTREMENETWORKS.COM 4
CPU/Memory EMI/EMC Standards
• ARM A9 CPU North American EMC for ITE
• 512 MB DRAM • FCC CFR 47 part 15 Class A (USA)
• 128 MB Flash • ICES-003 Class A (Canada)
• European EMC Standards
Environmental • EN 55032 Class A
Environmental Specifications • EN 55024
• EN 55035
• EN/ETSI 300 019-2-1 v2.1.2 - Class 1.2 Storage
• EN 61000-3-2,2014 (Harmonics)
• EN/ETSI 300 019-2-2 v2.1.2 - Class 2.3 Transportation
• EN 61000-3-3 2013 (Flicker)
• EN/ETSI 300 019-2-3 v2.1.2 - Class 3.1e Operational • EN 300 386 (EMC Telecommunications)
• EN/ETSI 300 753 (1997-10) - Acoustic Noise • 2014/30/EU EMC Directive
• ASTM D3580 Random Vibration Unpackaged 1.5 G • EN 55011 Class A
Environmental Compliance International EMC Certifications
• EU RoHS 2011/65/EU • CISPR 32, Class A (International Emissions)
• EU WEEE 2012/19/EU • AS/NZS CISPR32
• China RoHS SJ/T 11363-2006 • CISPR 24 Class A (International Immunity)
• Taiwan RoHS CNS 15663(2013.7) • IEC 61000-4-2 / EN 61000-4-2 Electrostatic Discharge, 8kV Contact, 15
kV Air, Criteria A
Operating Conditions • IEC 61000-4-3 /EN 61000-4-3 Radiated Immunity 10V/m, Criteria A
• Temperature • IEC 61000-4-4 / EN 61000-4-4 Transient Burst, 1 kV, Criteria A
• 8-port X435 models: 0° C to 40° C (32° F to 104° F) • IEC 61000-4-5 /EN 61000-4-5 Surge, 2 kV L-L, 2 kV L-G, Level 3, Criteria A
• 24-port X435 models: 0° C to 45° C (32° F to 113° F) • IEC 61000-4-6 Conducted Immunity, 0.15-80 MHz, 10V/m unmod. RMS,
• Humidity: 10% to 95% relative humidity, non-condensing Criteria A
• Altitude: 0 to 3,000 meters (9,850 feet) • IEC/EN 61000-4-11 Power Dips & Interruptions, >30%, 25 periods, Criteria C
• IEC 61000-4-8 / EN 61000-4-8
• Shock (half sine) 30m/s2 (3G), 11ms, 60 shocks
• CISPER 11 Class A
• Random vibration: 3 to 500 Hz at 1.5 G rms
• GB/T 9254-2008
Packaging and Storage Specifications
Country Specific
• Temp: -40° C to 70° C (-40° F to 158° F)
• VCCI Class A (Japan Emissions)
• Humidity: 10% to 95% relative humidity, non-condensing • ACMA RCM (Australia Emissions)
• Packaged Shock (half sine): 180 m/s2 (18 G), 6 ms, 600 shocks • CCC Mark (China)
• Packaged Vibration: 5 to 62 Hz at velocity 5 mm/s, 62 to 500 Hz at 0.2 G • KCC Mark, EMC Approval (Korea)
• Packaged Random Vibration: 5 to 20 Hz at 1.0 ASD w/–3 dB/oct. from 20 • EAC Mark (Custom Union)
to 200 Hz • NRCS / ICASA Mark (South Africa)
• Packaged Drop Height: 14 drops minimum on sides and corners at 42 • BSMI Mark (Taiwan)
inches (<15 kg box)
Telecom Standards
Regulatory and Safety • CE 2.0 Compliant
North American ITE
• UL 60950-1 IEEE 802.3 Media Access Standards
• UL 62368-1 • IEEE 802.3bz 2.5GBASE-X*
• Complies with FCC 21CFR 1040.10 (U.S. Laser Safety) • IEEE 802.3ab 1000BASE-T
• CDRH Letter of Approval (US FDA Approval) • IEEE 802.3at PoE Plus
• CAN/CSA 22.2 No. 60950-1 • IEEE 802.3bt Type3 PoE
• CAN/CSA No. 22.2 62368-1-14 • IEEE 802.3az Energy Efficient Ethernet
European ITE
2.5Gb uplink support is a future capability
*
• EN 60950-1, EN 62368-1
• EN 60825-1Class 1 (Lasers Safety)
• 2014 / 35/ EU Low Voltage Directive
International ITE
• CB Report & Certificate per IEC 60950-1 AS/NZS 60950-1
(Australia /New Zealand)
• IEC 62368-1
• GB 4943.1-2011
• CNS 14336-1
WWW.EXTREMENETWORKS.COM 5
Ordering Notes
Each X435 Series SKU includes the base unit along with integrated power supply, wall or rack-mount kit (depending on
model) and fan module (when required). It also includes an ExtremeXOS Value Edge Feature software license. Power cords,
transceiver/optics and optional AVB Feature Pack must be ordered separately.
Ordering Information
Part Number Product Name Product Description
ExtremeSwitching X435 switch with 8x10/100/1000BASE-T full / half duplex ports, 4x1G/2.5G*
X435-8T-4S X435 -8T-4S system
unpopulated SFP ports, 1 AC PSU, wall-mount kit (16573), ExtremeXOS Value Edge license, fanless
ExtremeSwitching X435 switch with 8x10/100/1000BASE-T PoE+ full / half duplex ports, 4x1G/2.5G*
X435-8P-4S X435-8P-4S system
unpopulated SFP ports, 1 AC PSU, wall-mount kit (16573), ExtremeXOS Value Edge license, fanless
ExtremeSwitching X435 switch 24x10/100/1000BASE-T PoE+ full / half duplex ports, 4x1G/2.5G*
X435-24P-4S X435-24P-4S system
unpopulated SFP ports, 1 AC PSU, rack-mount kit (XN-2P-RMKIT-004), ExtremeXOS Value Edge license
Accessories
Optional Rack Mount Kit for Optional Rack Mount kit for mounting a single X435-8T-4S or X435-8P-4S unit in a 1 RU
XN-2P-RMKIT-002
X435-8T-4S & X435-8P-4S rack space
Software Licenses
Warranty Optics/Transceivers
The X435 Series is covered under Extreme’s Universal LLW For a list of the optics/transceivers supported on X435
policy. For warranty details, please visit: Series hardware, refer to our Extreme Optics Compatibility
http://www.extremenetworks.com/go/warranty Tool at https://optics.extremenetworks.com.