Clear Steps Roller/Looper Wait to Load Global Polyrhythm
Pattern Tempo On/Off
Extend Seq.
Restart
—Sequencer 1, Sequencer 2 or Drum —Drum
—How to use SHIFT + [>>] = Extend sequence SHIFT + Pads = Set playing direction and resolution BeatStep Pro provides two Melodic Sequencer SHIFT + Knob 1 = Offset value for all active steps Drum + Pad = Select instrument without triggering a Drum Sequencer SHIFT + Knob 2 = Set value for all active steps Drum + Mute + Pad = Mute individual drum tracks and a Controller Mode. SHIFT + Step 1 = Clear entire pattern SHIFT + Step 16 = Drum polyrhythm on/off SHIFT + Step 2 = Clear steps Some of the key combinations are only available in Seq1/Seq2/Drum + Step = Select pattern specific modes. Here is a list of all those combinations. SHIFT + Seq1/Seq2/Drum + Steps = Create chain of patterns —Controller Step + Step = Tie notes between two steps SHIFT + Step 9 = Switch between Roller and Looper Save + Step = Save current sequence on selected step SHIFT + Step 14 = Wait to load pattern Last Step + Step = Set sequence length SHIFT + Step 15 = Global Tempo —All modes [<<] + [>>] = Follow playing cursor Save + Step = Save current patterns and chains SHIFT + Rate = Fine tempo on selected step (Scene mode active) SHIFT + Tap = Metronome on/off —Sequencer 1 or Sequencer 2 Step = Load current scene (Scene mode active) SHIFT + Chan + Step = Input MIDI Channel for current track SHIFT + Pads = Set scale, playing direction and resolution SHIFT + Play = Restart all Sequences Step + Pads = Set note and velocity of the played pad Project + Step = Change project Pad + Step = Set note/velocity of the played pad on selected step Save + Project + Step = Save current project on selected step Stop x3 = Send All notes off message Pads [Oct +] + [Oct -] = Reset octave transposition Seq1/Seq2 + Pad = Transpose sequence Cheat Sheet