Professional Documents
Culture Documents
Se SRS
Se SRS
Projecr>
Provide a short
benefits, objectives,description
of the software being specified and its purpose, including rele vant
and goals.
TO DO: 1-2
paragraphs describing the SCope
OSOcated with the product s scope of the
e
product. Make sure
the product. tou describe
sure to
the benefits
<Defineall the terms necessay to properly interpret the SRS, including acronyms and
abbreviations. You may wish to build a separate glossary that spans multiple projects or the entire
organization, and just include terms specificto a single project in each SRS.
TO DO: Please provide a list of all abbreviations and acronyms used in this document sorted in
alphabetical order>
<in general this document follows lhe IEEE fomating requirements. Use Arial font size 11, or 12
throughout the document for text. Use italics tor comments. Document text should be sinale
spaced and maintain the 1 margins TOund m nis templale, For Section and Subsection titles
anv other documents or Web addresses to which this SRS refers. These
may include user
rfane stvle quides, contracts, standards, system requirements specifications, use
case
documents, or a Vision and scope document.>
Sofiware Requirements Specification Page 3
for Project
2 Overall Description
Ummani2e the major functions the product must perfom or must let the user perform. Details
in
wI De proVided
level given
in the
Section 3, so only a high level summary is needed here. These can be at the
project description
TO DO:
1. Provide a bulleted list of all the major functions of the system
2.3 Design and Implementation Constraints
SDescribe any items or issues that will limit the options available to the developers. These might
include: hardware limitations (timing requirements, memory requirements): interfaces to other
applications specific technologies, (ools, and databases to be used parallel operations; language
requirements; communications protocols security considerations; design conventions or
programming standards (for example, if the customer's organization will be responsible for
maintaining the delivered software) You can be creative here to some degree. At a minimum,
you need to identify that you must use the COMET method for software design and the UML
modeling language. Make sure you provide references for both. >
sList any assumedfactors (as opposedto known facts) that could afect the requirements stated in
the SRS. These could include third-party or commercial components that you plan to use,
issues
around the development or operaling environment, or constraints. The project could be affectec f
these assumptions are incorrect, are not shared, or change. Also Identify any dependencies the
proiect has on external factors, suCh as sorTware components that you intend to reuse from
anolher project.
TO DO: Provide a short list of some major assumptions that might significantly affect your desian>
3 Specific Requirements
3.1 External Interface
Requirements
3.1.1 User Interfaces
Descnbe the logical characteristics of each interface between the software product and the
users. For your project, you only need to be concerned with the main thermostat (not the mobile
app)andcan use the graphic from the project description as the basis for your user interface.
TO DO: Provide the graphic for the thermostat user interface and provide a basic description as to
how users will interact (e.g. tough screen, menus, etc.).>
eDescribe the connections betwecn tnS product and otner specific software components
case. just the mobile app that can send commands). > (in voe
Page 5
m a r
one Requirements Specification for <Projecr>
2 Functional Requirements
Functional requirements capture the intended behavior of the systen This
expressed as services, tasks or functions the system is required to section is tne
P6nctional
direct cotinuation of section 2.2 where you have specified the genera fun require
Here. you should list in detail the different
product functions.
3.2.1 F1: The system shall...
Priority - What is the priority. Low, Medium, High. Importance of this use case being
completed and functioning properly when system is depolyed
Preconditions - Any condition that must be satisfied before the use case begins
Post conditions - The conditions that will be satisfied after the use case successfully completes
Actors Actors (human, system. devices, etc.) that trigger the use case to execute or provide
Extends-If this is an extension use case, identify which use case(s) it extends
Flow of Events
2 Exceptions - Exceptions that may happen during the execution of the use case
re Roquiremens Specificationfor Projecr> Page 6
Includes (other use case IDs)
Notes/Issues Any relevant notes or issues that need to be resolved
authentication requirements
TODO:
for Project
Requirements Specification
are Page 7
Omvide safety/security requirements based on your interview with the client -aga
.PrO need to be somewhat creative here. At the least, you should have some securityyou
may for
the mobile connection.
5 Other Requirements
<This section is Optional. Define any other requirements not covered elsewhere in the SRS. This
might include database requiremenis, internationalization requirements, legal requirements, reuse
objectives for the project, and so on Add any new sections that are pertinent to the project. >