Professional Documents
Culture Documents
029 Thenevenabag 20290624
029 Thenevenabag 20290624
029 Thenevenabag 20290624
MATERIAL LIST
FABRIC OTHERS
44” wide quilting weight cotton or linen cotton or (1) 18mm Magnetic snap
home deco (1) 7” All purpose zipper for zipper pocket
(1) yard for exterior fabric (Pink) (1) Spool of coordinating thread
(1/2) yard for exterior handle (Black)
(1/2)yard for exterior bottom (Black) TOOL
(1) yard for lining Ruler, Scissors, Chalk pencil, Pencil, Sewing ma-
chine, Pins, Needle, Shape tool
INTERFACING
* Seam allowance 1/2” unless otherwise specified.
44” wide medium weight fusible interfacing
* All units are in inches.
(1) Yard
CUTTING
Draw the patterns directly onto the wrong side of a single layer of fabric. Cut out the exterior and lining. If you
would like to add an interfacing, draw and cut it out. Fuse the interfacing on the wrong side of the lining front
and back pieces following the manufacturer’s guide.
EXTERIOR INTERIOR
(2) Handle Pieces (2) Front and Back Pieces
(2) Bottom Pieces (2) 7” widtih x 9” height for Pocket Pieces
(2) Zipper Pocket Pieces
INTERFACING
(2) Front and Back Pieces
* There are two options in cutting the interfacing, with or without the seam allowance. Cutting the interfacing without any seam
allowance will give it a better overall shape; if you would like to do this, use the original pattern (gray dotted line) to cut out the
interfacing.
1. Make the top pleats. Fold the fabric on 2. Place the center panel facing right side 3. Place the exterior handle and bottom
foldline, and align it with the placement up. Starting from the top, topstitch 5” with right sides together. Pin and stitch
line. Repeat this process for all 4 top pleats. downward. Backstich on both ends. Top- both pieces, backstitch on both ends.
When you look at the pleats from the front, stitch other pleats in the same manner.
they should all be folded toward the center.
Baste the pleats in place.
4 5 6
4. Press the seam toward the handle. Turn 5. Repeat step 1 for the front and back bot- 6. Clip the round corner seams.
the piece over to the front and press the tom pleats.With right sides together, pin the
seam again. Topstitch 1/8” along the edge of exterior front piece and back piece. Sew
the handle piece. Repeat step1-4 for the re- around the bag using a 1/2” seam allowance.
maining exterior pieces. Sew from one side, across the bottom, and
up the other side. Backstitch on both ends.
7. Make the zipper pocket, see Appendixes 8. Placement of magnet is marked on pat- 9. Pin the lining pieces with right sides fac-
B. Install the pocket, see Appendixes A. tern. Attach the magnetic snap on the lin- ing. Sew the lining , leave a 5” gap to turn it
ing’s right side following the manufacture’s right side out.
guide.
11. Stitch the handle from point 12. Clip the curved seams.
B to the other side point B,
backstitch on both ends. Re-
peat this process the other
side. Last, sew the inner curve
point A to B. Repeat this pro-
10. Press the exterior and lining seam open. Turn the exterior right cess the other side.
side out. Place the exterior into the lining with right sides together.
13 14 15
13. Turn the bag right side out. Sew the lin- 14. Press the top opening of the bag. Place 15. Tuck under the raw edges with a 1/2”
ing opening. the exterior straps with right sides togeth- seam allowance on each strap and press.
er and pin. Sew along only the short edg- Pin and baste handles together, Repeat this
es of the handle, backstitch on both ends. process for the other side.
Press the seam open. Repeat this process
for other exterior handle and lining handles.
16. Topstitch around the armhole of the bag making an oval shape. Topstitch on
the other side in the same manner. Next topstitch the outline of the handles.
Opening here
Picture 1 Picture 2
First, make the pocket. Place the pocket pieces Clip the corner seams
with rights sides together. Stitch around the
edges and leave a 2-3 inch gap for turning.
Topstitch
Picture 3 Picture 4
Turn the pocket right side out, push out the Attach the sewing label. (Optional)
corners, and press. Topstitch on the top edge
only.
1
B. Make the Zipper Pocket
Picture 6 Picture 7
Draw the zipper line onto the wrong side of Cut out the inside as indicated on the zipper
zipper pocket piece as indicated on the pattern. pocket pattern.
Place the zipper pocket piece onto the lining
back with right side together. Pin and stitch in
an rectangular shape. Backstitch on starting
and ending points.
Picture 8 Picture 9
Insert the fabric toward the wrong side of Press the seam. The right side of lining will
lining. look like the picture.
Picture 10 Picture 11
Place the zipper onto the wrong side of the Flip the back piece, so you can see the wrong
lining. Match the zipper's right side with the side of the lining back. Place the other zipper
lining's wrong side. pocket piece with right sides together. Stitch in
a rectangular shape. Stitch only the two lining
zipper pocket pieces.
2
C. Make the Elastic Pocket
Picture 12 Picture 13
Double fold and pin the top seam (1 ¼”) Attach a safety pin to one end of the elastic
of the lining pocket piece on the wrong band.
side of the fabric. Sew the elastic line
close to the edge, backstitching on both
ends.
Picture 14 Picture 15
Insert the elastic band into one open end of To make the bottom frill, running stitch two lines
the elastic line. Push and pull the safety pin along the bottom edge of the lining pocket piece.
until it comes out of the other end of the
opening.
Picture 16 Picture 17
Place the pocket piece on the lining back Sew the pocket’s divider lines as your desired
piece. The lining piece’s right side will meet length.
the pocket’s wrong side. Pin along the bottom
edge, making sure to pin at each end. Pull
one end of the running stitch thread. Pull the
other end of the running stitch thread to
match the bottom of the lining back piece. Pin
and sew the two together. Backstitch on both
ends, and cut the excess elastic.
3
** When printing this pattern, please
print it without any margins at actual size.
CUTTING LINE
STITCH LINE
PLACE ON FOLD
Placement line
Placement line
Fold line
Upper Pleat Upper Pleat
Fold line
Bottom Pleat
A B
Placement line
Exterior Handle
Fold line
Exterior Bottom(2)
Bottom Pleat
Placement line
3”(7.62cm)
Exterior Bottom(3)
PLACE ON FOLD
3”(7.62cm)
3”(7.62cm)
3”(7.62cm)
Exterior Bottom(4)
Lining(1)
3”(7.62cm)
THE NEVENA BAG
Lining(2)
Lining: Cut 2
Interfacing:Cut 2
Lining Poket
7” width X 6” height (Cut2)
3”(7.62cm)
Pocket PLACE ON FOLD
Lining(4)
3”(7.62cm)
Zipper Pocket(Lining)
A B
Exterior Handle
A4
3”(7.62cm)
THE NEVENA BAG
Exterior Handle
Exterior: Cut 2
1/2” seam allowance included
PLACE ON FOLD
A4
A B
Lining(1)
A4
Zipper Pocket(Lining)
Lining(3)
Pocket
PLACE ON FOLD
Lining(4)
3”(7.62cm)
A4
A4
Fold line
Placement line
Placement line
Fold line
Upper Pleat Upper Pleat
10 3/8” (26.35cm)
PLACE ON FOLD
THE NEVENA BAG
Exterior Bottom
Exterior: Cut 2
1/2” seam allowance included
A4
Exterior Bottom
Placement line
Fold line
Bottom Pleat
Placement line
3”(7.62cm)
A4
Zipper Pocket(Lining)
THE NEVENA BAG
Lining Zipper Pocket
Lining: Cut 2
3/8" seam allowance included