Professional Documents
Culture Documents
The amber LED allows you to pinpoint a fault that may have occurred on one of the A Quick press of the Yellow (mode) button will take you into the Service Mode
modules of the coin manager. These types of fault can be rectified at the machine and menus. The display will change to show the available option available. (see picture
can be for example; a coin jam, dirt built up on a particular sensor or cassette below).
Press Button Sequence Description / Action removed etc. The Coin Manager also displays the fault on it’s display. Service Mode Menu
(Options Available)
Quick Reference Card V 1.18 A PAR coin tubes / Insert coins if asked Amber
Coin Manager Maintenance LED Codes
Flashes
Understanding the User Interface Keypad Custom tube cassette teach / Follow
D 1X Discriminator error
2 Instruction
5 Service Connector CPM Compatible On Coin Manager inhibited by VMC Key Code Tube A Tube B Tube C Tube D Tube E
AA 10c 5c 25c 25c 5c
Coin Manager requires attention (Refer AB 10c 5c 25c $1 5c
Flashing
to Amber LED Codes) BA 25c 5c 25c 25c 25c
General Keypad Operation Off
No Power to Coin Manager . Check Power
harnesses are connected & ensure power is
BB
CC
10c 5c 10c 25c 5c
Custom cassette 1 - defined in factory or by service tool
When the coin manager is in the idle state, the blue buttons can be used to switched ON. CD Custom cassette 2 - define yourself using cassette teach
Flashing Press & Hold
dispense coins from the tubes. If however, the mode button is pressed beforehand, DAC 25c 5c $1 $1 25c
Coin Manager Faulty Mode Button
these buttons are used to navigate through the service & set-up menu options. Alternating DCA 25c 10c 25c $1 5c
(Send unit in for repair)
DCB 25c 10c $1 $1 5c
Keypad General Operation LANGUAGE
DCC 25c 10c 25c 25c 5c
Dispense coin D DCD 5c 10c 10c 10c 5c
A Dispense coin A D
Green LED Codes DCE 10c 10c 10c 10c 5c TEST
After Pressing
B Dispense Coin B E Dispense coin E
Mode Button
LED Codes for when in Set-up or Service Mode Cassette viewed
Tube from above ERROR LOG
Slow Flash Coin manager is in Set-up Mode/ E
C Dispense Coin C Mode
Service
GENERAL
The mode button can be used to access the two configuration modes available. Fast Flash Message Available
Service Mode and Set-up mode. Tube Tube Tube Tube
Service Mode: gives access to the most frequently used product configuration A B C D AUDIT CONFIG
Press A B C Code to go
options. (See Service Mode Options)
Coin Accepted from Basic to Advanced Menu.
Set-up Mode: gives access to general product configuration options that are Coin Discrimination LED Codes
/ Rejected The Coin Manager can also be custom configured by removing any of the coin COIN CONFIG
required when setting up your Coin Manager. (See Set-up Mode Options)
Inserted coin was accepted tubes and replacing them with another denomination tube. But there are
1 X Blink restrictions:
Mode Button Operation Always include at least one 5c tube in all custom configured cassettes. ADVANCED VENDOR OPTIONS Press D
Inserted coin was rejected - unknown to go UP
2 X Blink Do not place the $1 tube in tube A or B position. a menu level.
Press Once to access Service Mode menu (not recognized by discriminator) Do not place the 25 cent tube in tube B position.
ERROR LOG CHANGE MGMT
Coin rejected/inhibited by machine or Do not place the 10 cent tube in tube E position.
Press & Hold for 2 seconds to access Set-up Mode menu 3 X Blink Coin Manager program settings Press E to go Down
a menu level.
Press twice to view Coin Manager audit data. Tube # & Max Fill ($) Manual Fill($) Position PAR SETUP PAR SETUP
Ensure tube cassette is fitted. Coin Base (by Coin (do not fill In
Remove tube cassette and press twice to Park Color Manager) more than) cassette MESSAGES* MESSAGES* Menu Starts Here
the dispenser arms.
5c 22 Red 77 ($3.85) 87 ($4.35) A,B,C,D,E
* If available * If available
10c 20 White 115 ($11.50) 127 ($12.70) A,B,C,D
25c 25 Black 84 ($21.00) 96 ($24.00) A,C,D,E BASIC ADVANCED
MEI CASHFLOWTM 7512 Series Quick Ref. Guide 2008 - Rev G5 $1 27 Blue 69 ($69.00) 81 ($81.00) C,D,E
MENU MENU
Display - Symbol Indicators
Advanced Mode Menus AUDIT CONFIGURATION Basic Mode Menus During the coin manager programming or normal operation, icons may be shown
on the display. These icons will indicate if the coin manager requires any attention
This chart shows a detailed structure of the Advanced Set-up Menu. This chart shows a detailed structure of the Basic Set-up Menu. or will assist you in selecting a particular program mode.
Setup Machine ID
Reset audit
PAR SETUP
Token teach select location *Message Waiting Icon:- If there is a message waiting to be read, the
Security Hi acceptance LANGUAGE envelope icon will be shown on the display. This message is displayed
Hi security when/if the coin manager has detected that it can be optimized for
Language Not set better performance e.g. better tube combinations, payout algorithm etc. thus
Coin setup Coin 1 to 32 English US improving sales.
Chan setup Channel 1 to 32 French CN
Exchange Rate Edit US/CAN Spanish US Reading the Message: Access the setup menu in the normal way (the display
Alarm timeout Alarm time English UK will show the word "messages") and follow the instructions on the display.
Edit / 0 - 1275 secs Dutch The messages will be displayed in the order of; last in first out.
French EU The coin manager can store up to four messages at a time, when these have
Netherlands been read, you can delete them by going through to the delete messages menu.
Spanish EU
Portugues
Italian