Professional Documents
Culture Documents
WM..
siemens-home.com/welcome
en ,QVWUXFWLRQ0DQXDODQG,QVWDOODWLRQ,QVWUXFWLRQV
Register
your
product
online
ens-home.com/welcome
Your new washing machine Display rules
2
en
3
en Intended use
4
Safety instructions en
: Warning injuries.
Risk of death! Do not lean on the washing
There is a risk of electric shock machine door when it is
if you touch live components. open.
■ Never touch or hold the ■ Reaching into the drum
mains plug with wet hands. when it is turning can cause
■ Only pull out the mains cable injuries to hands.
by the plug and never by the Do not reach into the drum
cable, as this could damage when it is turning.
it. Wait until the drum has
■ The appliance must be stopped turning.
grounded.
Electrical connection : Warning
~ Page 13 Risk of scalding!
When you are washing at high
Risk of injury temperatures, there is a risk of
scalding if you come into
: Warning contact with hot water e.g. if hot
Risk of injury! water is being drained into a
■ When the washing machine wash basin.
is lifted by its protruding Do not reach into the hot
parts (e.g. the washing detergent solution.
machine door), the
components may break off Safety for children
and cause injuries.
Do not lift the washing : Warning
machine by protruding parts. Danger of death!
■ If you climb on the washing If children play with the washing
machine, the worktop may machine, they may get into life-
break and cause injuries. threatening situations or injure
Do not climb onto the themselves.
washing machine. ■ Do not leave children
unattended near the washing
machine.
■ Do not let children play with
the washing machine.
5
en Safety instructions
: Warning : Warning
Danger of death! Risk of poisoning!
Children may lock themselves Detergents and care products
in appliances, putting their lives may be poisonous if
at risk. consumed.
For appliances that have Keep detergents and care
reached the end of their service products out of the reach of
life: children.
■ Disconnect the mains plug.
■ Cut through the mains cable : Warning
and remove it, along with Eye/skin irritation!
plug. Detergents and care products
■ Destroy the lock on the may cause irritation if they
washing machine door. come into contact with the eyes
or skin.
: Warning Keep detergents and care
Risk of suffocation! products out of the reach of
Children may become wrapped children.
in packaging/film or packing
parts if allowed to play with : Warning
them, or they may pull them Risk of injury!
over their heads and suffocate. When you wash at high
Keep packaging, film and temperatures, the glass in the
packaging parts out of the washing machine door gets
reach of children. hot.
Do not let children touch the
hot washing machine door.
6
Environmental protection en
Don’ts
7 Environmental ■ Don’t dump the discarded Electronic
protection Equipment in the open or in any land
fill site, as this will result in
Packaging/used appliance contamination of the soil and the
ground water
noitceorplamnoteriEv
7
en Positioning and connecting
( Mains cable
5 Positioning and 0 Bag:
connecting ■ Installation and operating
instructions
Included with the appliance
gnitceodnagiotPso
■ After-sales service location
directory*
Note: Check the machine for transport ■ Warranty*
damage. Never use a damaged ■ Cover caps for openings left
machine. If you have a complaint, after removing the transport
please contact the retailer from whom locks
you purchased the appliance, or our ■ Wrench*
after-sales service. 8 Water drain hose
@ Elbow for securing the water drain
hose*
H Water supply hose on standard/
Aqua-Secure models
P Water filter*
*depending on the model
In addition, a hose clamp (24 - 40 mm
diameter, available from specialist
dealers) is required to connect the
water drain hose to a siphon.
Useful tools
■ Spirit level for levelling
■ Wrench with:
– WAF 13 for loosening the
transport locks, and
– WAF 17 for aligning the
appliance feet
# Safety instructions
: Warning
Risk of injury!
■ The washing machine is very heavy.
Be careful when lifting/transporting
the washing machine.
■ When the washing machine is lifted
by its protruding parts (e.g. the
+ 3 washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
8
Positioning and connecting en
■ If the hose and mains cables are not Order no. WMZ 20490,
routed properly, there is a risk of WZ 20490 WZ 20510, WZ 20520
tripping and injury.
Lay hoses and cables in such a way Note: On wooden joist floors, install the
that there is no risk of tripping. washing machine:
■ In a corner, if possible,
Caution! ■ On a water-resistant wooden board
Damage to the appliance (min. 30 mm thick) which is screwed
Frozen hoses may rip/burst. tightly to the floor.
Do not install the washing machine in
areas exposed to frost or outdoors. Installing the appliance in a
Caution! kitchenette
Water damage : Warning
The connection points for the water Danger of death!
supply hose and water drain hose are There is a risk of electric shock if you
under high water pressure. To prevent touch live components.
leaks and water damage, you must Do not remove the appliance covering
follow the instructions in this section. plate.
Notes Notes
■ In addition to the safety information ■ Recess width of 60 cm required.
listed here, the local water and ■ Only install the washing machine
electricity supplier may have special underneath a continuous worktop
requirements. that is securely connected to
■ If in doubt, have the appliance adjacent cabinets.
connected by a specialist.
Removing the transport locks
Installation surface
Caution!
Note: The washing machine must be
Damage to the appliance
aligned in a stable manner so that it
does not move around. ■ The machine is secured for
■ The installation surface must be firm transportation using transport locks.
and level. If the transport locks are not
■ Soft floors/floor coverings are not removed, the machine may become
suitable. damaged when it is operated.
Before using the appliance for the
first time, make sure that you
Installation on a base or a completely remove all four transport
wooden joist floor locks. Keep the locks in a safe
place.
Caution! ■ To prevent transport damage from
Damage to the appliance occurring if the appliance is moved
The washing machine may "wander" at a later date, you must refit the
and tip/topple from the base when transport locks before transporting
spinning. the appliance.
The feet of the appliance must be
secured with holding brackets.
9
en Positioning and connecting
Note: Keep the screws and sleeves in Hose and cable lengths
a safe place.
■ Left-hand connection
aFP
aFP
PD[FP
aFP
■ Right-hand connection
PD[FP
aFP
10
Positioning and connecting en
11
en Positioning and connecting
12
Positioning and connecting en
Electrical connection
: Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
■ Never touch or hold the mains plug
with wet hands.
■ Only pull out the mains cable by the
plug and never by the cable, as this
could damage it.
■ Never unplug the mains plug during
operation.
13
en Positioning and connecting
14
Positioning and connecting en
15
en Getting to know the appliance
6 7
( Detergent drawer
0 Controls/display elements
8 Washing machine door with
window handle
9S Open the washing machine door
9T Close the door
@ Service flap
16
Getting to know the appliance en
Control panel
Control panel depending on the model
+
#
+
#
( programme default settings can
be changed
Overview of all programme default
settings ~ "0 Programme
default settings" on page 21
0 Additional programme settings
can be selected
Overview of all programme
settings ~ Page 22
8 Start/Reload for starting,
interrupting (f.e. adding/removing
laundry) and cancelling a
programme
@ Display panel for settings and
information
H Programme selector for selecting
a programme and for switching
the machine on and off
17
en Laundry
Display panel
Settings for the selected programme
Cold* - 90 °C Temperature in °C; Cold = cold
– – –...1200** Spin speed; ** max. speed In rpm (rotations per minute);
depends on the model – – – = Rinse hold (without final spin)
1:30 Programme duration Depends on the programme selection in h:min
(hours:minutes)
1 - 24 h Ready in Programmes ends after ... h (h = hours)
7.0 kg Max. load
18
Laundry en
19
en Detergent
20
Programme default settings en
21
en Additional programme settings
22
Operating the appliance en
23
en Operating the appliance
Placing laundry into the drum The indicator light on the Start button
flashes, and the default settings for the
: Warning programme appear continuously on the
Risk to life! display panel. Changes may be made
Items of laundry pretreated with to the default settings.
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent, Measure and add detergent
may cause an explosion after being and care products
loaded into the washing machine.
Hand-rinse these items of laundry Caution!
thoroughly beforehand. Damage to the appliance
Notes Cleaning agents and agents for
■ Mix items of washing of varying pretreating laundry (e.g. stain removers,
sizes. Laundry items of different prewash sprays, etc.) may cause
sizes distribute themselves better damage if they come into contact with
during the spin cycle. Individual the surfaces of the washing machine.
laundry items may cause an Do not allow these agents to come into
unbalanced load. contact with the surfaces of the washing
■ Observe the maximum indicated machine. If necessary, immediately wipe
load. Overfilling adversely affects the away spray residue and other residues/
washing result and encourages droplets with a damp cloth.
creasing.
Dosing
1. Unfold presorted laundry items and Dose detergents and care products
place them in the washing drum. according to:
2. Ensure that no items of laundry are
■ The water hardness (ask your water
trapped between the door and
supply company)
rubber seal.
■ The manufacturer's instructions on
the packaging
■ The amount of laundry
■ Soiling
Filling
1. Pull out the detergent drawer.
: Warning
3. Close the door. Eye/skin irritation!
Detergent and care products may
run out if the detergent drawer is
opened while the machine is in
operation.
Open the drawer carefully.
Rinse eyes/skin thoroughly if they
come into contact with detergents or
care products.
If swallowed accidentally, seek
medical advice.
24
Operating the appliance en
2. Add detergent and/or care products. Note: If you want to lock the
programme to prevent it from being
inadvertently adjusted, you can select
the childproof lock as follows.
Childproof lock
You can lock the washing machine to
prevent the functions you have set from
Dispenser I Detergent for prewash being changed inadvertently. To do this,
Dispenser i Softener, starch. Do activate the childproof lock when the
not exceed maximum programme has started.
dose To activate/deactivate the childproof
Dispenser II Detergent for main lock, press and hold the Start button for
wash, water softener, approx. 5 seconds. The w symbol
bleach, stain remover appears in the display panel.
Notes
– When measuring the amount of ■ w lights up: The childproof lock is
all detergents, additives, care active.
products and cleaning agents, ■ w flashes: The childproof lock is
always follow the manufacturer's active, and the programme selector
instructions. has been adjusted. To prevent the
– Dilute thick-consistency fabric programme from stopping, turn the
softener and fabric conditioner programme selector back to the
with a little water. This will prevent original programme. The symbol
blockages. lights up again.
– Pour liquid detergent into Note: The childproof lock may remain
corresponding dispenser and activated until the next programme
place in drum. starts, even after the washing machine
has been switched off. You must then
Start the programme deactivate the childproof lock before
starting the programme and activate it
Select the Start button. The indicator again as necessary once the
light lights up and the programme programme has started.
starts.
Note: You will need to press and hold Adding laundry
the ‹ button to start the
programme.This prevents the After starting the programme, you can
programme from being started if add or remove laundry if necessary.
something accidentally brushes against To do this, Select the Start button. The
the button. washing machine checks whether
adding laundry is possible.
The display panel shows the Ready in
time while the programme is running or
the programme length and the
programme progress symbols once the
wash cycle has started.
Display panel
25
en Operating the appliance
26
Sensors en
VoltMonitor
The automatic voltage control system
detects unauthorised voltage drops
during the washing process.
– Leave the door and detergent Note: Whenever there is an
drawer open so that any residual undervoltage, the colon flashes on the
water can dry away. Ready in display on the display panel.
– Always remove the washing.
– Always wait until the programme
ends, as the appliance could still
be locked.
– If the display panel goes off at the
end of a programme, the energy-
saving mode is active. To
activate, select any button.
When the supply voltage is stable again,
the programme continues running. The
colon on the Ready in display stops
flashing.
If the interruption causes the
H Sensors programme to be extended, the dot on
the display flashes.
Automatic load sensing
sroSne
27
en Setting the signal
Set to Ú. Press and hold the 0 button and turn one Press and hold the button for
position to the right. approx. five seconds until the
display elements light up. Set-
ting mode is activated.
2. Set the volume for the button signals (depending on the model)
Press the button repeatedly until the Go to point Set to Ú to exit the setting mode for the signal volume.
desired volume is reached. 3 or
Turn the dial one position to the right. Press the button repeat- Set to Ú to exit the setting mode for
edly until the desired vol- the signal volume.
ume is reached.
28
Cleaning and maintenance en
29
en Cleaning and maintenance
3. Open and remove the service flap. Note: To prevent unused detergent
from flowing straight into the drain
during the next wash: Pour 1 litre of
water into compartment II and start
the Spin/Drain programme (if only drain
cycle is required, set (Spin
speed) 0 on - - - ).
30
Faults and what to do about them en
: Warning
Risk of injury!
You may injure your hands if you reach
into the drum while it is turning.
Do not reach into the drum when it is
turning. Wait until the drum has stopped
turning.
6. For standard and Aqua-Secure Caution!
models, clean the filter on the rear of
the appliance: Water damage
Remove the hose from the rear of Any escaping water may cause water
the appliance, damage. Do not open the washing
Remove the filter using pliers and machine door if water can be seen
clean the filter. through the glass.
If the laundry has to be removed, the
washing machine door can be opened
as follows:
1. Switch off the appliance.
2. Disconnect the mains plug.
3. Drain the water. ~ Page 29
4. Pull the emergency release
7. Connect the hose and check for downwards with a tool and release.
leaks. The washing machine door can now
be opened.
31
en Faults and what to do about them
32
Faults and what to do about them en
33
en Faults and what to do about them
34
After-sales service en
35
Repair order and advice in the event of faults
GB 0344 892 8999 (Calls charged at local or mobile rate.)
IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
0DQXIDFWXUHGE\%6++DXVJHUlWH*PE+XQGHU7UDGHPDUN/LFHQVHRI6LHPHQV$*
*9001190636*
9001190636 (9606)