Professional Documents
Culture Documents
3V and the
Vref is set to 3.3V. Calculate the digital output (codeword) when analog
input is 2.2V.
a. 2730
b. 1650
c. 3099
d. 3730
Solution: codeword = (Vin x 4095)/ Vref = (2.2 x 4095)/3.3 = 2730
Answer: a. 2730
2. The maximum voltage that a 12 bit ADC can measure is set to 2.2V.
Suppose an analog input of 3V is applied at the input. Calculate the
digital output (codeword) of ADC.
a. 2047
b. 0
c. 4095
d. 3095
Answer: c. 4095
3. The gain block of the ADC driver is set to 1 V and Vref = 1.2 V. At what
voltage does the Vin saturate? (Refer NRF52832 datasheet if required)
a. 3V
b. 2V
c. 1.2V
d. Does not saturate
Answer: c. 1.2V
7. What are the events that can wake WFI instruction from sleep?
a. Debug events
b. Interrupt request with a higher priority
c. Interrupt request with lower priority
d. Halt debug event
Answer: a, b & d