Title Cloud Services,Data centers,Edge computing,Edge Keyword devices,Fog computing,Cloud computing,cloud radio access s network,internet of things,latency,Remote office/branch office 1.Why study is needed? Almost all kinds of electrical devices will become part of IOT, such as air quality sensors, LED bars, streetlights and even an Internet-connected microwave oven. It is safe to infer that the number of things at the Edge of the network will develop to more than billions in a few years. Thus, the raw data produced by them will be enormous, making traditional Cloud computing not efficient enough to handle all these data. This means most of the data produced by IOT will never be transmitted to the cloud. Instead, it will be consumed at the edge of the network. 2.Purpose/Objective of Research study? The main of objective of studying Edge Computing Estimator is it will optimizes internet devices and applications by bringing computing closer to the source of the data.So,this minimizes the need for long distance communication. 3.Research Design/Approach/Method? The main approach for this Concept problem statement is to find- type,bandwidth(Mbps),RAM(MB), Processing Capability(Mips),Rate per Mips etc. ex:For cloud-10,000- 100(Mbps),40,000(MB),20,000(Mips),0.001(rate per Mips) 4.Data Analysis Techniques? The data analysis technique is applied in the MEDICAL APPLICATIONS. * HPC at the Edge for medical imaging merges HPC/AI and medical sensing technology in order to provide precision medicine through the use of real-time advanced monitoring and analysis of a patient’s medical data to detect early pathologies while lowering the risk of privacy breaches by keeping the data on site. 5.Conclusion: Nowadays, more and more services are pushed from the cloud to the edge of the network because processing data at the edge can ensure shorter response time and better reliability.More over bandwidth,RAM,Gb everything was saved.