Professional Documents
Culture Documents
2018-8-2
Firmware Upgrade:
1. Connect to the PC by USB cable,supply power to SKY03(don’t start up)
2. Using tweezers or the similar tools,press and hold the button on the DVR board,
Press the power button,then release all buttons,
Will find a new hardware on the PC,wait a moment to install the drive
(if the first time to upgrade the SKY03),and find a <removable disk>。
3. Copy the software <SKY03_V*_STM32_ENC_********.bin and
SKY03_V*_TWENC_********.bin>(*means the date of the version)>to the removable disk(can’t have any
folders,the capacity of the removable disk around 64K to 8MB),waiting for copy complete and update
successfully after 1-2S
4. This copy process complete about 20~30S