Optimisation of the system with the innovative solutions without compromising the
quality to stay competitive in the market.
Best Design and Engineering which brings greater value to the project in terms of both technically and commercially. Examples: System installation (especially MMS and others) by using natural contour, Considering that most sites are of very large area, most will not have flat land but will have contour variations. Commonly for major civil works, the effect of contours are overcome by scrapping or backfilling of the top soil. Scrapping of top soil will increase soil erosion in the area and reduce the overall frictional capacity of the soil. Backfilling is also not a good option as this would eventually erode away hence exposing the foundations. Initiation has been taken in the market to use the light weight cold formed pre-galvanized and galvalume structure parts for MMS to optimize the product in a greater extent. Project specific cost effective foundation solutions by considering Geotechnical reports and site contour survey. Project specific cost effective all weather road solutions by educating industry. In Indian Solar project scenario time is a major constraint, by considering it use of industry specific value addition in the project like use of prefabricated buildings extensively, Container solution for Inverter rooms, Innovative drainage solutions with respect to project site contour. Comparison of module mounting structure and foundation design and prices with varied module technologies, structure size, type (Fixed, Seasonal, Single and dual axis) and tilt etc. Use of serrated washer in the module mounting fasteners to avoid the provision of giving separate earthing route for PV Modules.