Professional Documents
Culture Documents
ISO 13709/
API 610 (VS6)
Vertical
Multistage
Double Case
Process Pump
the successful
application of
pre-engineered,
engineered, and
special purpose
pumps and
systems.
Pump Division
WUC The Ultimate Double Case Choice of Hydraulic Design Broad Application
Vertical Pump to best meet service • Hydrocarbon booster
ISO 13709/ The model WUC covers the requirements: and transfer
API 610 (VS6) highly engineered specialty • Radial flow hydraulics for low • Pipeline booster
end of the Flowserve family of flow, high head applications, • Chemical and
Vertical
double casing vertical pumps. and featuring: petrochemical transfer
Multistage The pump line is based on a – Stage casings with separate • Condensate
Double Case modular system, thus providing diffusers • Brine injection
Process Pump maximum design and operat- – Casings retained by • Heater drain
ing flexibility. This is combined tie-bolts • Crude oil loading
with specific design features, – Interstage bushings and • Condensate extraction
including stiff shaft construc- sleeves • Snowmaking
tion, a self-contained axial • Mixed flow hydraulics • Cryogenic service
thrust bearing housing and for high flow, low head
pressure containing parts applications, and featuring: Complementary
certified to various international – Integral diffuser design Pump Designs
standards. Altogether, this bowls Depending upon appli-
makes the WUC the pump – Individually bolted bowls cation requirements,
of choice for the most critical connected to column pipe Flowserve can also
applications where space con- – Fluid lubricated line provide these designs:
siderations or marginal NPSHA bearings, located between • Single-stage, axially and
values preclude the use of a each stage radially split between
horizontal multistage pump. bearing pumps
• Multistage, axially and
radially split between
bearing pumps
• Overhung, centerline
mounted process pumps
HDX
DVS
HPX
3
Pump Division
Operating Parameters
with Mixed Flow
Hydraulics
Operating Parameters with • Flows to 3000 m3/h
Radial Flow Hydraulics (13 200 gpm)
• Flows to 500 m3/h • Heads to 600 m
(2200 gpm) (1950 ft)
• Heads to 2000 m (6560 ft) • Temperatures from
• Temperatures from -200°C -200°C (-328°F) to
(-328°F) to 200°C (400°F) 350°C (660°F)
• Pressures to 200 bar • Pressures to 64 bar
(2900 psi) Mixed Flow Hydraulics (928 psi)
and Integral Diffuser Design
4 ISO 13709/API 610 (VS6)
Pump Division
5
Pump Division
Inducer
A special axial flow pumping
device, an inducer provides
significant improvement in
suction performance by reducing
pump NPSHR. This results in
a reduced suction barrel length
and a more compact, less
expensive installation. A special
inducer design reduces the back-
flow and guarantees trouble-free
Inducer operation over a wide flow range.
1500
2000
12 500 3000
100
150
200
300
400
600
800
15
20
30
40
60
80
3
5
6
gpm
30
40
60
80
100
150
200
300
400
600
800
1000
1500
2000
3000
4000
5000
6000
8000
10 000
15 000
Shaft, Multistage
ft m ft m
ISO 13709 /API 610 (VS1)
6000 2000 Radial Flow 6000 2000
1500 1500 Designed for wet pit or
4000 Mixed Flow 4000
3000 1000
800
3000 1000
800
deep well applications,
Mixed and Radial
2000 600
Flow
2000 600 the WUJ offers all of
1500 1500
400
1000 300
400
1000 300
the same mechanical
TDH - 60 Hz
TDH - 50 Hz
750
200
750
200
and design features of
500 150
400
500 150
400
the WUC in a single case
300 100
80 300 100
80
configuration.
200 60 200 60
150 150
40 40
100 30 100 30
75 20 75 20
50 15 50 15
10 10
1000
1500
2000
2500
m3/h
100
150
200
300
400
600
800
10
15
20
30
40
60
80
4
5
6
gpm
20
30
40
50
60
80
100
150
200
300
400
600
800
1000
1500
2000
3000
4000
5000
6000
8000
10 000
12 500
Flow Rate - 50 Hz
6
Pump Division
Project Supervision
Commissioning
Equipment Upgrades
Condition Monitoring
Systems Analysis
Field Machining
7
Flowserve... Supporting Our Customers
With The World’s Leading
Pump Brands
Printed in USA
October 2011
© Flowserve Corporation