Professional Documents
Culture Documents
Where will
this be indicated?
-On the Exemption Certificate
Your vessel has completed an inspection for certification and is issued a Temporary Certificate of
Inspection. The Temporary Certificate __________.
-has the full force of the regular Certificate of Inspection
You are in port A in the United States, and your Certificate of Inspection has expired. You wish to
go to port B in the United States for repairs and to complete the inspection. If the Officer-in-
Charge Marine Inspection deems it safe, he may issue a __________.
-Permit to Proceed.
Your vessel is issued a load line certificate dated 27 May 1992. What is NOT an acceptable date
for one of the surveys for endorsements?
A) 28 February 1993
B) 27 November 1993********
C) 26 August 1994
Your load line certificate expires on 27 May 1988. The vessel is surveyed on that date and is
found satisfactory. You are sailing foreign the same day. Which statement is TRUE?
-The existing certificate is extended for a period of up to 150 days.
A vessel would be referred to as "tender" when the weight of the cargo is __________.
-concentrated high and the double bottoms are empty
A vessel would be referred to as "stiff" when the weight of the cargo is __________.
-concentrated low and the double bottoms are full.
A tank which carries liquid is dangerous to the stability of a vessel when it is __________.
-slack
Which device is designed to automatically hold the load if power should fail to an electric winch?
-Electromagnetic brake.
A spreader bar is used to __________.
-protect the upper part of a load.
** A periodic thorough examination of the cargo gear proves satisfactory. What percentage of the
total gear must be dismantled to determine actual internal condition?
A) None**
B) 10%
C) 25%
D) 100%
cevap NONE
You have abandoned ship and are in an inflatable raft that has just inflated. You hear a
continuous hissing coming from a fitting in a buoyancy tube. What is the cause of this?
-Excess inflation pressure is bleeding off and should soon stop.
Distance along a track line is measured on a Mercator chart by using the __________.
-latitude scale near the middle of the track line
A major advantage of the NAVTEX system when compared to other systems is that__________.
-warning are printed out for reading when convenient.
"Cribbing" is __________.
-wooden blocks or dunnage placed between a deck load and the deck.
The usual method of arranging a line on deck so that it will run out easily without kinking or
fouling is __________.
-faking down the line
If a mooring line should part while you are tying up at a dock, you should make a temporary eye
by tying a __________.
-bowline
Chafing gear __________.
-reduces and prevents wear caused by the rubbing of one object against another
A vessel cannot comply with all of the SOLAS requirements due to its construction. Where will
this be indicated?
-On the Exemption Certificate
Your vessel has completed an inspection for certification and is issued a Temporary Certificate of
Inspection. The Temporary Certificate __________.
-has the full force of the regular Certificate of Inspection
You are in port A in the United States, and your Certificate of Inspection has expired. You wish to
go to port B in the United States for repairs and to complete the inspection. If the Officer-in-
Charge Marine Inspection deems it safe, he may issue a __________.
-Permit to Proceed.
Where are the test certificates, for wire rope used as cargo runners, and loose gear certificates
usually maintained?
-With the Cargo Gear Register on the ship.
Your vessel is issued a load line certificate dated 27 May 1992. What is NOT an acceptable date
for one of the surveys for endorsements?
A) 28 February 1993
B) 27 November 1993********
C) 26 August 1994
Your load line certificate expires on 27 May 1988. The vessel is surveyed on that date and is
found satisfactory. You are sailing foreign the same day. Which statement is TRUE?
-The existing certificate is extended for a period of up to 150 days.
The only portable electrical equipment permitted in a compartment which is not gas free is a
lamp that is __________.
a. battery fed
b. self-contained
c. approved explosion proof
d. All of the above***
what is the danger to people when co2 discharged in small enclosed space
a) electric shock
b) repiratory arrest xxxx
c) frostbite
You are in a lifeboat in a heavy sea. Your boat is dead in the water and unable to make way.
To prevent broaching, you should __________.
-put out the sea anchor (cevap kesin u.yol 1.zbt çıkmış soru)
What represents poor sanitary procedures?
-Locate potable (drinking) water tanks as low as possible in the bilge.
(cevap kesin u.yol 1.zbt çıkmış soru)
The fittings used to secure water tight door are known as....
-dogs (cevap kesin u.yol 1.zbt çıkmış soru)
a) Bone
b) Joint
c) Ribs
d) Fracture
e) Blood ***
a) Deadrise
b) Camber ***
c) Freeboard
d) Sheer
e) Frame
184 -“Reduce swing as rapidly as possible.” Has the same meaning with (FORUMDA VAR)
a)steady? b)steady as she goes?? c)steady on her route d)midship e)keep the wheel rapidly
203 ) Supposing a fire caused by short electric circuit within the equipments is categorized as
a_____________fire and will be extinguished vıa_____________
a) Class A/foam? b) Class C/chemical powder c) Class C/CO₂ d) Class B/foam Cevap ( a )
şıkkı
334.A victim has suffered a second-degree burn to a small area of the lower arm. What is the
proper treatment for this injury?
a) Immerse the arm in cold water for 1 to 2 hours, apply burn ointment, and bandage.xxxxxx
b) Open any blisters with a sterile needle, apply burn ointment and bandage.
c) Apply burn ointment, remove any foreign material and insure that nothing is in contact
with the burn.
d) Immerse the arm in cold water for 1 to 2 hours, open any blister and apply burn ointment.
336.Unless there is danger of further injury, a person with a compound fracture should not be
moved until bleeding is controlled and ____.
a) the bone has been set
b) the fracture is immobilized xxxx
c) radio advice has been obtained
d) the wound has been washed
338.First aid treatment for small cuts and open wounds is to _____.
a) lay the patient down and cover the wound when the bleeding stops
b) stop the bleeding, clean, medicate, and cover the wound xxxxxx
c) apply an ice pack to the wound and cover it when the bleeding stops
d) apply a hot towel to purge the wound, then medicate and cover it
341. Depths which have been measured are indicated by the numbers shown on the chart.
Depths on charts published in most parts of the world use _____________.
a) meters??? b) feet c)fathom
85- A vessel not having a "Seaworthiness Certificate" or of wich the part of it is over
a) Can carry cargo but not passengers
b) Cannot carry cargo
c) Cannot carry passengers
d) Cannot operate commercially xxxxxx
e) Cannot sail
8. In these circumstances it is difficult to asses the damage caused by the collision. In Turkish you
would say ………………………
A) Bu koşullarda çatışmanın hasara yol açıp açmayacağını tahmin etmek zor.
B) Çatışmanın ne gibi hasara yol açtığını bu koşullarda açıklamak zor gelebilir.
C) Çatışmanın yol açtığı zararı karşılamak, bu koşullar altında çok zor. xxx
D) Farklı durumlarda çatışmanın zararını karşılamak ve karşılaştırmak çok zor.
E)Bu koşullar altında çatışmanın neden olduğu hasarı saptamak zor. ?
Before apply first layer of paint, last particles on bare metal removed with .....
Line Brush
Flat Brush
Wire Brush xxxxxx
Chipping hammer
9-) Hold, ballast and air dry spaces must have visual and audible signals acc to solas in...
-Bulk carriers xxxxxx
-Tankers
-Passsenger
-Ro-ro
-passenger roro
10-) İnitial surveys of cargo gear carried out completely and frequently surveys are made in …
-Annually xxxxxx
-2
-3
-4
-5
1. Seamen who do NOT understand each other can communicate by using ....................
A) signatures
B) silence
C) signals
D) sibilants
E) solidarity
2. Portable rechargeable battery operated lamps shall be available in some important points.
Correct translation of this sentence into Turkish is;
A) Bazı önemli noktalarda şarjedilebilir, portatif bataryalı lambalar bulunacaktır.
B) Bazı önemli noktalarda şarjedilebilen bataryayla çalışan, portatif lambalar bulunacaktır.
C) Portatif şarjedilebilen pilli lambalar önemli noktalarda bulunacaktır.
D) Bir kaç önemli noktada şarjlı portatif lambalar bulunacaktır.
E) Şarjlı bataryalar taşınabilir olmalıdır ve bazı önemli noktalarda istiflenmelidir.
3.Navigator’s sea map with coast outlines, rocks, shoals, etc.is known as:
A) Charter party
B) Chart
C) Charge
D) Charter
5.two way vhf radio telephone ve sartlar hangi sertifikanın kontrolünde bakılır.
Cevap:cargo ship safety equipment
11.A receipt of goods shipped on board a ship signed by the person (or his agent) who
contracts to carry them,and stating the terms on which the goods are carried is known
as ................
A) Bill of Health
B) Bill of Lading xxx
C) Bill of Bulkhead
D) Bill of Sale
E) Notice of Readiness
a) Magnetic compass
A spanner is a __________.
Before using a fixed CO2 system to fight an engine room fire, you must __________.
** The biggest problem you generally encounter while towing a single tow astern is __________.
a. the catenary dragging on the bottom
b. swamping of the tow
c. the tow tending to dive
d. Yaw*****
Your chart indicates that there is an isolated rock and names the rock using vertical letters. This
indicates the __________.
a. rock is visible at low water springs only
b. rock is a hazard to deep draft vessels only
c. rock is dry at high water******
d. exact position of the rock is doubtful
You are in a tropical port. The refrigeration machinery on a container loaded with air-cooled
fruit fails. It cannot be repaired for 18 to 24 hours. Which step should you take to reduce the
temperature rise and spoilage of the fruit?
The complete details of a crude oil washing system aboard your vessel, including the
operating sequences and procedures, design characteristics, a description of the system, and
required personnel will be found in the __________.
Before a tank is to be crude oil washed, the oxygen content in the tank must be measured at a
position __________.
Which of the signals listed is required to be displayed at night while bunkering at a dock?
The most likely time for oil pollution while bunkering is when __________.
A spanner is a __________.
Which statement about entry into a water ballast tank that has been sealed for a long time is
TRUE?
A) A "buddy system" should be used where someone enters the tank with you.
B) Sea water acts on the ship's metal and generates chlorine gas which may accumulate in
poisonous quantities.
C) You should always wear a gas mask.
D) After ventilation and testing, and the tank is found safe for entry, someone should stand by
at the tank entrance while you are inside.*******
Which statement about entering into a tank which has been sealed for a long time is TRUE?
A) The tank should be tested only once to ensure the oxygen content is at least 14% before
entry.
B) The tank must be tested at frequent intervals to ensure that hazardous gasses have not
regenerated.**************
C) The tank need not be tested for oxygen content if it is ventilated for more than 24 hours.
D) If the oxygen content tests at less than 12% you should wear an approved gas mask.
Which hazard probably would NOT be encountered when entering an empty but uncleaned
fish hold?
A) Lack of oxygen
B) Methane gas
C) Hydrogen sulfide gas
D) Carbon monoxide**************
A) 16%
B) 18%
C) 21%*************
D) 25%
Combustible gas indicators operate by drawing an air sample into the instrument __________.
A) over an electrically heated platinum filament***************
B) where it is mixed with nitrogen
C) where it is ignited by a sparking device
D) where its specific gravity is measured
A) rich to burn
B) lean to burn***********
C) cool to burn
D) dense to burn
A) The equipment shall be secured to the hose by a quick-disconnect coupling to prevent the
tool from becoming accidentally disconnected.*****
B) The equipment must be grounded to prevent shock hazard.
C) The chipping mechanism is made of non-sparking material that is safe to use near
explosive atmospheres.
D) The needles of the needle-type chipping gun must be replaced when they have been
blunted more than ½ of their diameter.
When using a pneumatic chipping tool all of the following are TRUE except?
When chipping rust on a vessel, the MOST important piece of safety gear is __________.
A) a hard hat
B) gloves
C) goggles***********
D) a long sleeve shirt
Safety goggles or glasses are NOT normally worn when __________.
A) Grease collects in the duct and filter and if it catches fire is difficult to
extinguish.****************
B) In order to effectively draw off cooking heat they present a head-injury hazard to a person
of average or more height.
C) They inhibit the effective operation of fire fighting systems in combating deep fat fryer or
range fires.
D) They concentrate the heat of cooking and may raise surrounding flammable material to the
ignition point.
A) extra line and wire are laid out on deck for emergency use
B) all lashings are made up, and the decks are clean and clear********
C) power tools are kept plugged in for immediate use.
Oily rags stored in a pile that is open to the atmosphere are a hazard because they may
__________.
A) conspicuously marked
B) stowed anywhere
C) left on deck
D) secured or stowed out of the way*************
A) Paints, varnish, or other liquid flammables are stowed in a dry stores locker.
B) Inert cargoes such as pig iron are loaded in a wet condition.
C) Oily rags are stowed in a metal pail.*************
D) Clean mattresses are stored in contact with an electric light bulb.
Which of the following represents the maximum percent of oxygen, by volume, required to be
achieved by a ship's inert gas system, prior to the commencement of crude oil tank washing?
A) 6%
B) 8%***************
C) 10%
D) 12%
Mechanical gearing of deck machinery such as the windlass or towing engine should
__________.
A) be open to view so, if a foreign object gets in the gearing, the operator can immediately
stop the machinery
B) have a guard over the gearing************(çıkmış soru)
C) be painted a contrasting color from the base color in order to call attention to the gearing
D) not be operated if there is any crew within 10 feet of the machinery
Which type of portable lighting may be used to enter a compartment on a tank barge which is
NOT gas-free?
A) A three-cell flashlight
B) An explosion-proof, self-contained, battery-fed lamp***********
C) A spark resistant and flame retardant lamp
D) None of the above
Which statement about entry into a water ballast tank that has been sealed for a long time is
TRUE?
A) A "buddy system" should be used where someone enters the tank with you.
B) Sea water acts on the ship's metal and generates chlorine gas which may accumulate in
poisonous quantities.
C) You should always wear a gas mask.
D) After ventilation and testing, and the tank is found safe for entry, someone should stand by
at the tank entrance while you are inside.*************
Which statement about entering into a tank which has been sealed for a long time is TRUE?
A) The tank should be tested only once to ensure the oxygen content is at least 14% before
entry.
B) The tank must be tested at frequent intervals to ensure that hazardous gasses have not
regenerated.************
C) The tank need not be tested for oxygen content if it is ventilated for more than 24 hours.
D) If the oxygen content tests at less than 12% you should wear an approved gas mask.
What is the generally accepted method of determining whether the atmosphere within a cargo
tank is explosive, too rich, or too lean to support combustion?
A) Use the open flame test on a small sample that has been taken from the tank.
B) Send a gas sample ashore for laboratory analysis.
C) Enter the tank with an oxygen analyzer.
D) Use an explosimeter.****************
The only portable electrical equipment permitted in a compartment which is not gas free is a
lamp that is __________.
A) battery fed
B) self-contained
C) approved explosion proof
D) All of the above**************(çıkmış soru)
The minimum concentration of a vapor in air which can form an explosive mixture is called
the __________.
A) auto-ignition point
B) flash point
C) lower explosive limit (LEL)**************
D) threshold limit value (TLV)
A) 0% to 1%
B) 1% to 10%****************
C) 10% to 15%
D) 12% to 20%
A) incapable of supporting combustion because the hydrocarbon vapor content makes the
atmosphere below the LFL (Lower Flammable Level)
B) capable of supporting combustion
C) in a noncombustible state which can be relied on to occur naturally on a regular basis
D) incapable of supporting combustion because the hydrocarbon vapor content makes the
atmosphere above the UFL (Upper Flammable Limit)************
A) incapable of supporting combustion because the hydrocarbon content is below the LFL
(Lower Flammable Limit)***********
B) capable of supporting combustion because the hydrocarbon content is above the UFL
(Upper Flammable Limit)
C) capable of supporting a fire once started
D) not safe for ballasting
A) rich to burn
B) lean to burn**********
C) cool to burn
D) dense to burn
Your vessel is on a voyage of three months duration. The number of sanitary inspections
required is __________.
A) one******************
B) three
C) six
D) twelve
Which chemical is used to treat water in order to ensure its safety for drinking?
A) Nitrogen
B) Chlorine************
C) Carbon
D) Oxygen
A) Keep and use a separate filling hose for potable (drinking) water.
B) Locate potable (drinking) water tanks as low as possible in the bilge.*************
(çıkan soru)
C) Eliminate enclosed spaces in which trash, food particles, dirt may gather.
D) After washing dishes with soap and warm water, sterilize them in water of at least 170°F
(76.7°C).
On a tankship, sanitary inspections of the crew's quarters are the responsibility of the
__________.
Oily rags stored in a pile that is open to the atmosphere are a hazard because they may
__________.
A) fire-main system
B) feed-water system
C) freshwater sanitary system
D) domestic water tank****************(çıkmış soru)
A) conspicuously marked
B) stowed anywhere
C) left on deck
D) secured or stowed out of the way**************
It is desirable to have screens on the vents of potable water tanks to __________.
A) Paints, varnish, or other liquid flammables are stowed in a dry stores locker.
B) Inert cargoes such as pig iron are loaded in a wet condition.
C) Oily rags are stowed in a metal pail.*************
D) Clean mattresses are stored in contact with an electric light bulb.
You are requisitioning stores for your tank vessel. What type of matches are permitted
aboard?
A) Phosphorous
B) Safety************
C) Self-extinguishing
D) Wooden
You are ordering ship's stores. Which statement is TRUE?
A) carry loads on your inside shoulder when walking along the outside of a barge
B) tighten ratchets outboard
C) walk on the top of covered barges when possible to avoid narrow gunwales
D) always remove the toothpick after tightening the ratchet*********
when instructing a crew member concerning the right way to lift a weight, you would instruct
him to___________
A) Personnel may work beneath suspended loads, as long as they are alert and wear hard hats.
B) If a suspended load with no tag begins to spin, personnel should attempt to stop the
spinning if the load is within reach.
C) If tag lines are used to control a suspended load, they should be secured to the deck.
D) Personnel not involved in the hoisting operation should be kept clear of the transfer
area.***************
A) a threaded bolt
B) a round pin, with a cotter pin
C) a threaded bolt, locknuts, and cotter pins**********
D) round pins and locknuts
Placing a lashing across a hook to prevent a fitting from slipping out of the hook is called
__________.
A) faking
B) flemishing down
C) mousing**********
D) worming
You are berthed at a cargo facility where you have just completed discharging a dangerous
cargo. You must complete topside repairs involving hot work before sailing. Which of the
following statements is TRUE?
A) You can make repairs with permission of the facility owner since you are empty and the
cargo is on the facility.
B) The repair area must be inspected by a marine surveyor to ensure that it can be done safely.
C) Hot work repairs at such a facility are prohibited.
D) The Captain of the Port may give specific approval to make hot work
repairs.********************
Your vessel has been loaded in a sagging condition. Enroute you encounter heavy weather
and notice buckling in the midships deck plating of your vessel. To relieve the strain you
could __________.
When patching holes in the hull, pillows, bedding, and other soft materials can be used as
__________.
A) shores
B) gaskets***********
C) strongbacks
D) wedges
The wooden plug inserted in the vent of a damaged tank should be removed if you are going
to __________.
The BEST information on the nature and extent of damage to the vessel is obtained from
__________.
A) bracing
B) battening
C) blocking
D) shoring*************
A) parceling
B) parbuckling
C) caulking**********
D) seizing
Repairing damage to the hull at or above the waterline reduces the threat of __________.
In plugging submerged holes; rags, wedges, and other materials should be used in conjunction
with plugs to __________.
A) first
B) following control of fire**********
C) following restoration of vital services
D) only if a threat exists
A) filling completely************
B) developing free surface
C) developing free surface moment
D) collapsing
A crack in the deck plating of a vessel may be temporarily prevented from increasing in
length by __________.
A) negative GM
B) progressive flooding***********
C) structural failure
D) an immediate need to ballast
A) If you cannot get clear immediately, lighten the ship by pumping all ballast overboard.
B) Run the engine full astern to keep from being set further onto the bar.
C) Switch to the high suction for condenser circulating water, if it is
submerged.**************
D) All of the above
Your vessel has gone aground in waters where the tide is falling. The BEST action you can
take is to __________.
A) This requires extensive calculation and is usually performed only by a naval architect not
by a ship's officer.
B) Determine the point where aground and the draft at that point, then calculate it using the
grounding formula.
C) Use the hydrostatic tables and enter with the mean draft before grounding and the mean
draft after grounding.**********
D) Use the inclining experiment formula and substitute the change of trim for the angle of list.
Your vessel was damaged and initially assumed a significant list and trim; however, further
increase has been slow. Based on this data, what should you expect?
A) The slowing is only temporary and the vessel will probably suddenly capsize or plunge
from loss of stability due to change in the waterplane area.
B) The vessel can probably be saved if further flooding can be stopped.*************
C) The vessel will continue to slowly list and/or trim due to the free surface effect and free
communication effect.
D) The vessel will suddenly flop to the same or greater angle of list on the other side and may
capsize.
Your vessel has been damaged and is partially flooded. The first step to be taken in attempting
to save the vessel is to __________.
A) A hole in the hull at the waterline is more dangerous than a hole below the inner
bottom.***********
B) The amount of water entering a ship through a hole varies inversely to the area of the hole.
C) Water flowing into a lower compartment on a ship is more dangerous than water on deck
or flowing into an upper compartment.
D) Water flowing over the fo'c'sle bulwark is more dangerous than a hole in the hull at the
waterline.
While in dry dock your vessel will be belt-gauged. This process involves __________.
A) Every ton of weight bearing on the blocks acts as if a ton of weight was removed at keel
level.***************
B) When the ship touches the blocks, the beam for stability purposes increases to the beam of
the dry-dock.
C) The stability of the vessel increases as a dock is pumped out due to the support of the keel
blocks.
D) As the dock begins to support the weight of the vessel, stability calculations are based on
the ship and dock as a single unit.
Wale shores would be used when dry docking a vessel with __________.
A) tumble home
B) excessive deadrise*********
C) excessive trim
D) a list
The best information on the location of the blocks when dry docking a vessel is contained in
the __________.
The Sailing Directions (Enroute) contain information on all of the following EXCEPT
__________.
A) ocean currents*******************
B) outer dangers to navigation
C) tidal currents
D) major port anchorages
-NAVTEX
-forecasts
When determining compass error by an azimuth of Polaris, you enter the Nautical Almanac
with the __________.
-LHA Aries
The values of the Greenwich hour angle and declination, tabulated in all almanacs, are for the
__________.
What is the major limitation in using the Sight Reduction Tables for Air Navigation Volume I
(Pub. No. 249) for star sights?
-Only certain stars are included and sights must be limited to those stars.
Chart legends printed in capital letters show that the associated landmark is __________.
-conspicuous
The shoreline on charts generally represents the mean __________.
The reference datum used in determining the heights of land features on most charts is
__________.
-vertical distance from the chart sounding datum to the ocean bottom
-Polyconic
The numeral in the center of a wind rose circle on a pilot chart indicates the __________.
-percentage of calms
How is the annual rate of change for magnetic variation shown on a pilot chart?
All of the following can be found on a Pilot Chart EXCEPT information concerning the
__________.
-amounts of precipitation
-tidal currents
-1:700,000
-1:35,000
-1:200,000
-1:100,000
-The length of the meridians is increased to provide for equal expansion in all directions
A chart projection depicting the poles and a small area on either side of a connecting
meridian, that is sometimes used for star charts, is the __________.
When using a Lambert conformal chart in high latitudes, angles such as bearings are
measured in reference to __________.
When navigating in high latitudes and using a chart based on a Lambert conformal projection,
__________.
In very high latitudes, the most practical chart projection is the __________.
-Lambert conformal
For what purpose would using a Lambert conformal chart be more convenient than using a
Mercator?
Which information does the outer ring of a compass rose on a nautical chart provide?
-True directions
the value of sixty nautical miles per degree of geodetic latitude is most correct at________
-latitude 45
-Lower-left corner
The agonic line on an isomagnetic chart indicates the __________.
-magnetic directions
You are in a tropical port. The refrigeration machinery on a container loaded with air-cooled
fruit fails. It cannot be repaired for 18 to 24 hours. Which step should you take to reduce the
temperature rise and spoilage of the fruit?
-Shade the container and periodically hose it down
1.INLAND ONLY A power-driven vessel pushing ahead or towing alongside on the Mississippi River,
above the Huey P. Long Bridge, shall carry __________ .
2.BOTH INTERNATIONAL & INLAND You see the display of lights shown. This indicates a vessel
__________.
3. BOTH INTERNATIONAL & INLAND The lights prescribed by the Rules shall be exhibited __________.
B at all times
A A
B B
C C
5. You are on anchor watch. As an aid to preventing thievery on the vessel you should
____________________ .
B only show the required anchor lights and keep the rest of the vessel darkened
C maintain water on deck with firehoses led out and all-purpose nozzles attached
D show anchor lights, deck lights and cargo lights hung over the vessel's side
A blue flag
7. The tankship Northland is loaded as shown. Use the salmon colored pages in the Stability Data
Reference Book to determine the hogging numeral.
A 49.73 numeral
B 52.76 numeral
C 55.29 numeral
D 57.93 numeral
8. BOTH INTERNATIONAL & INLAND Diagram "B" shows the arc of visibility of a __________ .
B red sidelight
C green sidelight
D stern light
9. INLAND ONLY Under the Rules, the term "vessel" does NOT include __________ .
A seaplane
C hovercraft
10. INLAND ONLY A power-driven vessel when pushing ahead or towing alongside on the Western
Rivers (above the Huey P. Long Bridge on the Mississippi River) shall exhibit __________ .
11. Using a safety factor of five, determine what is the safe working load for 3-1/2 inch manila line
with a breaking stress of 4.9 tons.
A 0.82 ton
B 0.98 ton
C 2.45 tons
D 12.25 tons
12. To reconnect a broken tow line, it is better to use a polypropylene messenger line because it
____________________.
B is very supple
C floats
13. Which of the following statement(s) is/are TRUE regarding twin pedestal cranes?
A Each single boom is of the partial-level luffing type and is capable of limited rotation.
A 015°
B 075°
C 255°
D 345°
15. What would be the height of the tide at Crisfield, MD, at 0310 DST (ZD +4) on 6 May 1983?
A 0.1 foot
B 0.5 foot
C 1.1 feet
D 1.6 feet
16. A mean sun is used as the reference for solar time for three reasons. Which reason is NOT a
cause for use of a mean sun?
A elevation
B temperature
C wind speed
D latitude
A Cirrus
B Stratus
C Cumulus
D Cumulonimbus
19. What will be the time (ZD +5) of the second high tide at Weymouth Fore River Bridge, MA, on 12
November 1983?
A 1639
B 1643
C 1647
D 1650
C at conjunction
D at opposition
A vessel cannot comply with all of the SOLAS requirements due to its construction. Where
will this be indicated?
When instructing a crew member concerning the right way to lift a weight, you would instruct him to
__________.
A) arch the back to add strength to the muscles
#B) bend his knees and lift with his legs
C) bend his back and stoop
D) bend his back and stoop with arms straight
#A) Net tonnage is the gross tonnage less certain deductions for machinery and other areas.
B) Net tonnage is tonnage of cargo compared to tonnage of whole ship.
C) Net tonnage is the net weight of the ship.
D) There is no difference.
A) All engines, motors, fans, etc. should be shut down when fueling.
B) All windows, doors, hatches, etc. should be closed.
C) A fire extinguisher should be kept nearby.
#D) Fuel tanks should be topped off with no room for expansion.
Enroute from Rio to Montevideo, the true course is 215°; the gyro error is 2° west. A north wind
causes 3° leeway. What course would you steer per gyrocompass to make good the true course?
A 220°pgc
B 214°pgc
C 216°pgc
D 210°pgc
You are docking a ship with a single-screw tug assisting on your starboard bow. How should the tug
be tied up if you are anticipating that she will have to hold your bow off while you stem the current?
A) One head line would be sufficient.
B) The tug would need at least two head lines.
C) The tug should put a spring line up, leading astern on the ship.
#D) The tug should put a stern line up, leading ahead on the ship.
8. After loading cargo, cargo manifest is prepared based on the ............. it describes the ship
cargo in terms of packing weight, quantities, shipper name, consignee name.
a) Bill of Lading**
b) Damage Report
c) Notice of Readiness
d) Statement of Facts
e) Protest
9. Depth are measured from chart ....... which is related to the local sea level.
a) Datum**
b) Information
c) Line
d) Scale
e) Symbol
14. What is the primary purpose for Digital Selective Calling (DSC)?
a. DSC provides reception of weather and navigational warnings plus search and rescue
information.
b. DSC provides low-cost, routine communications for the vessel operator.
c. DSC is to be used for transmitting and receiving distress alerts to and from other ships or
coast radio stations via radio.**
d. This aids SAR authorities in tracking a vessel's position by satellite.
16. Marine Survayor gemiyi kontrol ettikten sonra hangi raporu yazar?
a)medical
b)an expert**
Inspection, either general or partial according to the circumstances, to be made after a repair
resulting from casualty investigations or whenever any important repairs or renewals are made.
The sentence above is the definition of,
#a) additional survey
b)Intermediate survey
c) Annual survey
d) Periodical survey
e) Renewal survey