ondrives
n Gears Manufacturing
Gear Tooth Calculator
[Normal module
Tn 4.0000 mm
[Normal pressure angle an 20.0000 °
Helix angle 6 0.0000 °
[Number of teeth z 18
Profile shift coefficient x 0.0000
Normal tooth tolerance DIN 3867 e 25
[Diameter of measurement ball input) Dit 0.0000 mm
[Spanned teeth for measurement (input) k 0
[Gear Reference Profile DIN 867
|Dedendum coefficient hp 4.2500
JRoot radius factor Pp 0.2000
[Addendum coefficient hap 1.0000
Hip alteration Kem 0.0000 mm
[Transverse module me 1.0000 mm
[Transverse pressure angle a 20.0000 °
[Base helix angle 0.0000 °
Reference diameter d 418.0000 mam
Hip diameter do 20,0000 mam
Root diameter a | 153352 | 15.4176 [mm
[Normal tooth allowance As» | -0.0600 | -0.0300 | mm
Normal tooth thickness at reference diameter sy | 15108 [15408 [mm
[Normal tooth thickness at tip diamecer Sen [06150 | 0.6483 [mm
[Generating profile shift coefficient xe | 000824 | 0.0812
[Generating profile shift coefficient at undercut limie Ein 0.0656
Measuring pin /ball diameter Dw 1.7000 mam
Radial single ball distance Ma_| 100753 [10.1102 [mm
Distance over wo balls Moe | 20.1506 | 20.2205 | mam
[Distance over two pins Moe | 20.1506 | 20.2205 | mm
eee
INumber of teeth for span measurement k 2
[Base tangent length (Span) we | 46239 | 46521 [mm
Warning: The gear has undercut. Please increase xE to a value larger 0.065604
Ondrives Led, Foxwood Industrial Park, Chesterfield, Derbyshire, S41 SRN, UK
Tel: #44(0) 124645500
sales@ondrives.com wewwondrves.comondrives
n Gears Manufacturing
‘The method and sign convention is as by ISO 21771 using a none topping DIN 867 1.25 / 0.20/ 1.00
reference profile,
Caleulation is valid for a value of 1 normal module and above. Reference diameter 10mm and upto and
including 10000mmn,
‘A negative sign Is used for the number of teeth of an internal gear but all diameters are always positive.
Helix angle is always entered as a positive value, Results are the same for left and right helix.
If diameter of measurement ball (input) and spanned teeth for measurement (input) are left blank, default
values are calculated
Distance aver two pins per DIN 3960,
This calculation is provided free of charge by Ondrives Ltd. The software is tested and no errors are
known, but there is no warranty for the correctness of the results and for availability of the calculation. The
usage is at own risk.
Transverse Gear Profile
Ondrives Led, Foxwood Industrial Park, Chesterfield, Derbyshire, S41 SRN, UK
Tel: #44(0) 124645500
sales@ondrives.com wewwondrves.com