You are on page 1of 1

Critical soil Pressure = KPa 145 145 145

Adopting pile-mat foundation system


Diameter of Pile = mm 400 600 800
Adopted Pile length = m 12 12 12
Pile Capacity wrt soil report = KN 320 720 1250
Pile Ultimate Capacity wrt FOS (=2.5) = KN 800 1800 3125
For Mat supported Pies, we adopt 70% of
pile ultimate capacity KN 560 1260 2187.5
Assuming efficiency of pile in group= % 90% 90% 90%
Spacing of pile = m 1.86 2.80 3.68
Adopted spacing (4.5D)= m c/c 1.8 2.7 3.6

Capacity of Pile supported ground = KPa 155.6 155.6 151.9


% of settlement % 1.5 1.5 1.5
Spring constant for the pile group = KPa/m 25926 17284 12659
Note: to take effect of 70% of pie capacity, Pile load test is mendatory.

You might also like