Professional Documents
Culture Documents
Producer of
custom conveyor
and function belts
Industry leader
in transport belt
technology
Ordering example, inches Explanation of color coding for ordering
examples.
Length Cog Width Fabric/Cord Coating
Neo-timing belt 270L200 Glas cord - Sleeve / Linatex 6mm Belt Width
Cog pitch
27 · 25,4mm = 685,8 mm long Length
2 · 25,4mm = 50,8 mm wide Coating
Fabric / cord
Ordering example, millimeters Cut pieces in metre (M) / welded (V) / (W)
100 mm wide
1440 mm long
The information in this catalogue is based binding for the final finish of the goods
on our experience and knowledge at the supplied.
time of writing. Considering the variety of All prices available on request.
possible influences on our products during
their processing and use the information Address:
does in no way release customers of carry- Norditec Antriebstechnik GmbH
ing out their own examinations and test- Kiekut
ing. No binding legal warranty regarding D-19258 Zahrensdorf
particular characteristics or the aptitude for Phone: +49 (0)38847- 624810
a specific application can be derived from Fax: +49 (0)38847- 624814
our information. Any property rights as e-mail: kontakt@norditec.de
well as existing laws and regulations must Internet: www.norditec.de
be observed by the recipient of our prod-
ucts at their own responsibility. Norditec USA LLC
6427 Ithaca Lane North
Subject to alterations due to technical de- Minneapolis, Minnesota 55311-4148
velopments or adaptations to changed Phone: 763-550-9063
norms or regulations. Fax: 763-550-0506
e-mail: kroll@norditec-usa.com
Photographs shown in this catalogue are Internet: www.norditec-usa.com
examples for demonstration and are not
Contents
Our Company . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Coatings ..........................................4
Polyurethane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Rubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Other Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Special Coatings . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Silicone Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
APLN Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Teflon Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Seamless PU Coating . . . . . . . . . . . . . . . . . . . . . . . 10
Felt Coating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
FDA Approved Coatings . . . . . . . . . . . . . . . . . . . . . 12
Coated V-belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Ridgetop V-belts . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Dual Timing Belts . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Vacuum Timing Belts . . . . . . . . . . . . . . . . . . . . . . . . 16
Cam Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Removable-Cam System . . . . . . . . . . . . . . . . . . . . . 18
Pocket Timing Belts . . . . . . . . . . . . . . . . . . . . . . . . . 19
Commercial Goods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Timing Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Toothed Washer . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Poly-Net . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Water-Jet Cutting . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Polyurethane Spraying . . . . . . . . . . . . . . . . . . . . . . 24
Anti-Static Measurement . . . . . . . . . . . . . . . . . . . . 24
1
About us
2
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
The manufacturing of all our products is • Open ended and endless coating
based on the purchase of industrially pro- • Mechanical CNC processing
duced drive belts such as; timing belts, Poly- • Cam welding
V belts, V-belts and belts that are refined • Special solutions
into special conveyor belts.
There is almost no limit to our capabilities to
customize belts. If you have a special appli-
cation and are looking for a solution, please
contact us.
Services
• Water-jet cutting
• PU spraying
• Measurment of electric conductivity
Standard components
• Toothed pulley
• Belts
• PU spraying facilities
• Vulcanising technology
(presses and autoclaves)
• Water-jet cutting technology
• CNC-machines
• Construction department and mechanical
workshop for quick construction of
production equipment
• State-of-the-art plastics joining technology
• Silicone coating equipment
• Comprehensive belt grinding and coating
machines
3
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
• Welding
• Gluing
• Vulcanizing
• Spraying
4
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
Polyurethane (PU)
Sylomer (PU Foam) Celloflex
Yellow Type G: VW: 150 kg/m3 Vulkolan foam
Blue Type R: VW: 220 kg/m3 Yellow-brown
Green Type L: VW: 300 kg/m3 VW: 400 kg / m3
Brown Type M: VW: 400 kg/m3
Red Type P: VW: 510 kg/m3
Grey Type V: VW: 680 kg/m3
PU Grip PU Foil
White White, hardness: 60° Shore
Milky, hardness: 85° Shore
Natural, hardness: 92° Shore
Blue
Sprayed PU PU Fishbone
Yellow (standard) White
Other colours optional Hardness: 86° Shore
Hardness: 50° Shore
seamles possible
FDA possible
VW = Volumetric weight
5
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
Rubber
Linatex APLN
Red Red
Hardness: 40° Shore Hardness: 60° Shore
Linatril Linaplus
Orange White
Hardness: 55° Shore FDA-quality
Hardness: 40° Shore
Rudex Remaline
Red Ochre
Hardness: 40° Shore Hardness: 35° Shore
Orange
Hardness: 50° Shore
Correx G / GSTR
Beige Blue
Hardness: 40° Shore Coarse structure
6
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
Rubber
Neoprene Neoprene FDA
CR/ SBR 63 CR/ SBR 60
Black Bright
Hardness: 60° Shore Conform FDA
Hardness: 60° Shore
Perbunan Peruban
NBR/ SBR 65 NBR 60
Black Bright
Hardness: 65° Shore KTW-certification for
contact with drinking water
Hardness: 60° Shore
Porol Para
Cell rubber CR SBR / NR 40
Black Grey
Vol.weight: 175 kg/m3 Hardness: 40° Shore
Viton Elastomer
Fluoric rubber Green
Black Hardness: 65° Shore
Hardness: 75° Shore
7
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
PVC
PVC PVC Sawtooth
White FDA White
Hardness: 40° Shore Hardness: 40° Shore
Blue
Hardness: 40° Shore
PVC Nipple
White
Hardness: 65° Shore
8
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
Other Coatings
Poly Amide (PA) Fabric Antistatic surfaces
green Lacquered black
or PAZ and PAR antistatic
Transparent Transparent
Hardness: 70° Shore Hardness: 70° Shore
9
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
APLN Coating
10
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
PU Neoprene Belt
11
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
Polyurethane Crossbar
Thickness ≈ 2.5mm
12
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
N1
N2
N3
Conveyor v-guides coated with white rubber.
13
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
Processing
Guide slots, holes and slits are standard fab- Smooth objects can be more easily trans-
rication options. Special fabrication options ported if the belts are grooved to increase
are available if desired to optimize the effec- the coefficient of friction.
tiveness of the belt to match your specific
needs.
• Cutting
• Milling
• Milling with CNC technology
• Grinding
• Punching
• Perforation
• Water-jet cutting
Groves can be added to thick coatings to im- Perforations are used in vacuum as well as
prove flexibility or increase grip. other applications.
14
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
Multi – Dual timing belt one-sided Multi – Dual timing belt both sides
Top T5 and T10 Top T5 and T10
Bottom T5 Bottom T5 and T10
15
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
16
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
Cam Belts
Cam belts/cleat belts are used for conveying We will supply whatever cam you require for
piece goods requiring fixation of the prod- your most demanding applications.
uct during transportation.
Cams are made in our in-house injection
Norditec’s continuously expanding „Cleat molding machines and machining centers.
Catalog“ has over 300 stock cleat cam de-
signs. Just ask and a catalog will be sent.
Custom cams will be made to your drawings The cams are welded to polyurethane belts.
if a stock design is not available. Norditec also offers a removable-cam sys-
tem. (See „Removable-Cam Systems.“)
17
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
Removable-Cam Systems
The removable-cam system enables quick
replacement of cams at all times, especially
when the belt is first fitted. This reduces in-
stallation and replacement costs.
y
x
Bottomside view
18
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
sharp edged
19
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
Special Solutions
Norditec is well know for it’s unique solu-
tions to solve difficult conveying require-
ments. We will work with you to find a
solution to “our“ problem.
Available sizes:
Wide silicone coated timing belts with perforations For widths up to 1,000 mm a HV-foil is
welded to the surface allowing Norditec to
Several different belts can be joined toge- reach this width.
ther to form one wide belt with synchro-
nized teeth.
20
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
21
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
22
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
A hand operated press cuts fingers into the Norditec also offers unmodified timing
belt. belts, toothed pulleys and Poly-net.
23
Coatings Processing Cams Special Solutions Equipment Commercial Goods Services
Services
Water-jet Cutting Antistatic measurment
Polyurethane Spraying
24
Norditec USA LLC
6427 Ithaca Lane North
Minneapolis, Minnesota 55311-4148
Phone: 763-550-9063
Fax: 763-550-0506
e-mail: kroll@norditec-usa.com
Internet: www.norditec-usa.com
Norditec Europe
e-mail: kontakt@norditec.de
Internet: www.norditec.de