Professional Documents
Culture Documents
Op nbr
Tools:
11667001 Handle
11667060 Drift plate
11667140 Drift plate
Dismantling
1. Remove the bearing race for the lower main gear. Use suitable puller.
Figure 1
2. Remove the bearing for the oil pump gear. Use suitable puller.
Figure 2
3. Remove the O–ring for the cylinder for the differential lock control.
Figure 3
Figure 4
5. Clean and inspect the dismantled parts for damage and wear. Change parts as needed.
WARNING
Risk of frostbite! Wear protective work gloves.
Assembling
6. Cool the bearing race for the lower main gear and the bearing for the oil pump's gear shaft to a temperature not lower than
-20 °C (-4 °F).
WARNING
Risk of frostbite! Wear protective work gloves.
WARNING
Risk of frostbite! Wear protective work gloves.
Figure 6
9. Install the O–ring for the cylinder for the differential lock control. Smear vaseline on the O–ring.
Figure 7