Professional Documents
Culture Documents
E Specific Ac I Ones
E Specific Ac I Ones
SP000911
SPECIFICATION FOR DX140W/DX160W
SP000911
Specification
for DX140W/
DX160W
Edition 1
CAUTION!
Follow all safety recommendations and safe shop practices
outlined in the front of this manual or those contained
within this section.
Always use tools and equipment that are in good working
order.
Use lifting and hoisting equipment capable of safely
handling the load.
Remember, that ultimately safety is your own
responsibility.
APPLICABLE MODELS
The contents of this section apply to the following models and
serial number ranges.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 43
40 22
23 18
24
38
41 19
20
42
21
36
35
34
33
32
31
30 25
29 39
27 26
FG006396
Figure 1
A
I E
D
H
G
F
L J K
B
FG006432
Figure 1
Dimension
Reference Description 4.3 m (14' 1") One-Piece Boom
2.1 m (6' 11") Arm
A Shipping Length 7,235 mm 23' 9"
B Shipping Width 2,496 mm 8' 2"
C Shipping Height (Boom) 3,351 mm 11'
D Height Over Cabin 3,040 mm 9' 12"
E Counterweight Swing Clearance 2,200 mm 7' 3"
F Ground Clearance 350 mm 1' 2"
G Frame Clearance 1,206 mm 3' 11"
H Engine Cover Height 2,376 mm 7' 10"
I Upper Housing Width 2,494 mm 8' 2"
J Wheel Base 2,800 mm 9' 2"
K,L Tread Width 1,944 mm 6' 5"
A
I E
D
H
G
F
L J K
B
FG006433
Figure 2
Dimension
Reference Description 4.6 m (15' 1") One-Piece Boom
2.5 m (8' 2") Arm 2.1 m (6' 11") Arm
A Shipping Length 7,470 mm 24' 6" 7,820 mm 25' 8"
B Shipping Width 2,496 mm 8' 2" 2,496 mm 8' 2"
C Shipping Height (Boom) 3,460 mm 11' 4" 3,225 mm 10' 7"
D Height Over Cabin 3,040 mm 9' 12" 3,040 mm 9' 12"
Counterweight Swing
E 2,200 mm 7' 3" 2,220 mm 7' 3"
Clearance
F Ground Clearance 350 mm 1' 2" 350 mm 1' 2"
G Frame Clearance 1,206 mm 3' 11" 1,206 mm 3' 11"
H Engine Cover Height 2,376 mm 7' 10" 2,376 mm 7' 10"
I Upper Housing Width 2,494 mm 8' 2" 2,494 mm 8' 2"
J Wheel Base 2,800 mm 9' 2" 2,800 mm 9' 2"
K,L Tread Width 1,944 mm 6' 5" 1,944 mm 6' 5"
A
I E
D
H
G
F
L J K
B
FG006434
Figure 3
Dimension
Reference Description 4.988 m (16' 4") Two-Piece Boom
2.5 m (8' 2") Arm 2.1 m (6' 11") Arm
A Shipping Length 6,885 mm 22' 7" 7,030 mm 23' 1"
B Shipping Width 2,496 mm 8' 2" 2,496 mm 8' 2"
C Shipping Height (Boom) 3,730 mm 12' 3" 3,650 mm 12'
D Height Over Cabin 3,040 mm 9' 12" 3,040 mm 9' 12"
Counterweight Swing
E 2,200 mm 7' 3" 2,200 mm 7' 3"
Clearance
F Ground Clearance 350 mm 1' 2" 350 mm 1' 2"
G Frame Clearance 1,206 mm 3' 11" 1,206 mm 3' 11"
H Engine Cover Height 2,376 mm 7' 10" 2,376 mm 7' 10"
I Upper Housing Width 2,494 mm 8' 2" 2,494 mm 8' 2"
J Wheel Base 2,800 mm 9' 2" 2,800 mm 9' 2"
K,L Tread Width 1,944 mm 6' 5" 1,944 mm 6' 5"
WARNING!
The actual value for dimension "L" Digging Reach, depends
on the stability and support provided by ground conditions.
Digging too far underneath the excavator if soil conditions
are wet, loose or unstable can collapse ground support,
which could cause injury and/or equipment damage.
C
D
A
FG006453
Figure 4
C
D
B
A
FG006454
Figure 5
C
D
A
FG006455
Figure 6
60
TORQUE (kg.m)
50
40
150
POWER OUTPUT (ps)
100
160
150
140
REVOLUTION (rpm)
FG006844
Figure 7
Medium Weight or
Low Weight or Density High Weight or Density
Density
Material 1,100 kg•m3 2,000 kg•m3
1,600 kg•m3
(1,850 lb/yd3), or Less (3,370 lb/yd3), or Less
(2,700 lb/yd3), or Less
401 kg•m3
Charcoal --------------------- ---------------------
(695 lb/yd3)
433 kg•m3
Coke, blast furnace size --------------------- ---------------------
(729 lb/yd3)
449 kg•m3
Coke, foundry size --------------------- ---------------------
(756 lb/yd3)
Coal, bituminous slack, 801 kg•m3
--------------------- ---------------------
piled (1,350 lb/yd3)
Coal, bituminous r. of m., 881 kg•m3
--------------------- ---------------------
piled (1,485 lb/yd3)
897 kg•m3
Coal, anthracite --------------------- ---------------------
(1,512 lb/yd3)
Clay, DRY, in broken 1,009 kg•m3
--------------------- ---------------------
lumps (1,701 lb/yd3)
1,746 kg•m3
Clay, DAMP, natural bed --------------------- ---------------------
(2,943 lb/yd3)
Cement, Portland, DRY 1,506 kg•m3
--------------------- ---------------------
granular (2,583 lb/yd3)
Cement, Portland, DRY 1,362 kg•m3
--------------------- ---------------------
clinkers (2,295 lb/yd3)
1,522 kg•m3
Dolomite, crushed --------------------- ---------------------
(2,565 lb/yd3)
1,202 kg•m3
Earth, loamy, DRY, loose --------------------- ---------------------
(2,025 lb/yd3)
1,522 kg•m3
Earth, DRY, packed --------------------- ---------------------
(2,565 lb/yd3)
Test Conditions
1. All tests should be performed on a flat, level, firm
supporting ground surface.
2. All recommended, applicable maintenance and adjustment
service should be completed before testing.
3. Hydraulic fluid and engine oil should be of appropriate
viscosity for ambient weather. Warm up hydraulic oil to
standard operating temperature, between 45° - 55°C (112°
- 135°F).
4. Run all tests with the engine speed control set to maximum
rpm.
5. Repeat tests with Power Mode engine control settings at
both Standard Mode (standard work mode) and Power
Mode (high-speed mode). Travel speed tests should be
performed at travel mode.
5
1
4
3
2
FG008175
Figure 8
Reference Reference
Description Description
Number Number
1 Travel Motor 4 Front Axle
2 Rear Axle with Transmission 5 Swivel Joint
3 Driveshaft
1.5M
FG006845
Figure 9
Reference
Description
Number
1 Start Swing 1
2 90° Swing FG004452
Figure 10
3 Swing Force
4 Swing Stop