McGuire, W, Steel Structures, Prentice Hall, Englewood Cliffs, NJ, 1968, p. 933.
Mohr, B., and Murray, T. M,, “Investigation of Ultimate Bending Strength of Steel of Steel
Bracket Plates,” Masters Thesis, Virginia Tech., 2005, Blacksburg, VA.
Muir, L. S., and Thornton, W. A,, “An Alternate Approach to Eccentrically Loaded Bolt Group
Design.” ECCS / AISC Workshop Connections in Steel Structures V, June 3-5, 2004,
Amsterdam, Netherlands.
Murray, T., “Design of Lightly Loaded Column Base Plates,” Engineering Journal, vol. 20,
no. 4, 4th quarter, 1983, pp. 143-152.
Richard, R. M,, “Analysis of Large Bracing Connection Designs for Heavy Construction,”
National Steel Construction Conference Proceedings, AISC, Chicago, IL, 1986, pp. 31.1—
31.24,
Richard, R. M,, etal, “Analytical Models for Steel Connections,” Behavior of Metal
Structures, Proceedings of the W. H. Munse Symposium, W. J. Hall and M. P. Gaus, eds.,
ASCE, NY, May 17, 1983.
Sputo, T., and Ellifrit, D. S., “Proposed Design Criteria for Stiffened Seated Connections to
Column Webs,” Proceedings of the AISC National Steel Construction Conference,
Washington, DC, 1991, pp. 8.1-8.26.
Stockwell, F. W, Jr., “Preliminary Base Plate Selection,” Engineering Journal, vol. 21, no. 3,
3rd quarter, 1975, pp. 92-99.
struik, J. H. A., and deBack, J., “Tests on T-Stubs With Respect to a Bolted Beam to Column
Connections,” Report 6-69-13, Stevin Laboratory, Delft University of Technology, Delft,
The Netherlands, 1969 [as referenced in Kulak, Fisher, and Struik (1987)], pp. 272-282.
Swanson, J. A., “Ultimate Strength Prying Models for Bolted T-Stub Connections,”
Engineering Journal, vol. 39, no. 3, 3rd quarter, pp. 136-147.
Thornton, W. A,, “Prying Action—A General Treatment,” Engineering Journal, vol. 22, no. 2,
2nd quarter, 1985, pp. 67-75.
Thornton, W. A, “Design of Small Base Plates for Wide Flange Columns,” Engineering
Journal, vol. 27, no. 3, 3rd quarter, 1990a, pp. 108-110.
Thornton, W. A., “Design of Small Base Plates for Wide Flange Columns—A Concatenation
of Methods,” Engineering Journal, vol. 27, no. 4, 4th quarter, 1990b, pp. 173-174.
Thornton, W. A, “On the Analysis and Design of Bracing Connections,” National Steel
Construction Conference Proceedings, AISC, Chicago, IL, 1991, pp. 26.1-26.33.
Thornton, W. A,, “Strength and Serviceability of Hanger Connections,” Engineering Journal,
vol. 29, no. 4, 4th quarter, 1992, pp. 145-149.
Thornton, W. A, “Treatment of Simple Shear Connections Subject to Combined Shear and
Axial Forces,” Modern Steel Construction, vol. 35, no. 9, September, 1995a, pp. 9-10.
Thornton, W. A,, “Connections—Art, Science and Information in the Quest for Economy and
Safety,” Engineering Journal, vol. 32, no. 4, 4th quarter, 1995b, pp. 132-144.
Thornton, W. A,, “Rational Design of Tee Shear Connections,” Engineering Journal, vol. 33,
no. 1, 1st quarter, 1996, pp. 34-37.