Professional Documents
Culture Documents
k imer a
model s
75 mm
K R O M • K I M ER A M ODE L S 75m m
SART07 SART26 SART39 SART08 SART43 SART24
flesh
1. Start by covering the joints of the different 2. Aim for a grayish skin tone to enhance the 3. Shadows can be made with airbrush, SART24
parts using blue-tack, so that paint does not ambiance, airbrush base SART07 Pink Flesh + Purple + SART26 Turquoise Blue + SART39 Wood.
prevent them from being glued correctly. Once this SART26 Turquoise Blue + SART39 Wood. Then,
is done, apply a double black/white priming coat add SART08 Golden Flesh + SART43 Vanilla
with an airbrush. White and apply first highlights th an airbrush in
zenithal position.
4. Moving on to paintbrush work. Use SART39 Wood + SART43 Vanilla White, create volume by applying
brushstrokes in the direction of maximum light exposure.
min ip edia
SART26 SART41 SART16 SART07 SART24 SART32 SART47 SART44
head
5. Paintface shadows also using a paintbrush, applying them softly towards maximum shade area, using SART26 Turquoise Blue + SART41 Dark Brown Ochre.
Then, paint the hair base so that face framing is easier, using SART16 Green Grey + SART26 Turquoise Blue.
6. Use two medium shades to nuance the skin down between light and shadow planes, a reddish shade SART07 Pink Flesh + SART24 Purple and a second greenish
shade with SART07 Pink Flesh + SART32 Spring Green.
7. Paint the eyes starting on the eyeball, using SART47 Off White, then, use SART16 Green Grey for the iris, and add SART26 Turquoise Blue to illuminate, and
finally add SC102 Inktense White to create a glow. Then, start working on the hair over the previous base, painting highlights with SART16 Green Grey + SART44
Artic Blue and shadows with SART16 Green Grey + SART41 Dark Brown Ochre.
8. The base color for the leather chest straps can be 9. To simulate aged leather, add SART43 Vanilla 10.Use inks to satin the straps’ shadows, using
painted with SART40 Raw Umber + SART41 Dark White to the previous mix to illuminate, and draw lines SC95 Inktense Brown and SC99 Inktense Cyan.
Brown Ochre. simulating cuts and textures. Outline the edges using
SART43 Vanilla White + SART26 Turquoise Blue.
11. Paint the rest of the elements with base colors to check how they work together, using SART24 Purple + 12. Now, define the different elements. Paint the first highlight
SART41 Dark Brown Ochre for reddish leather areas, apply SART40 Raw Umber for vertical leather straps, of the reddish leather belt with SART41 Dark Brown Ochre +
SART30 Prusian Blue + SART40 Raw Umber for green leather, SART15 Violet Grey + SART16 Green Grey SART20 Yellow Ochre, then, add SART45 Pastel Violet to outline
for steel areas and SART46 Pastel Green for lower clothing. that highlight and SC81 Inktense Chestnut + SC82 Inktense Violet
for shadows. Apply the same treatment and color as in the chest
leather to vertical leather straps. Mix SART41 Dark Brown Ochre
+ SART42 Burnt Sienna to create a base for the bronze plates.
15. To define all areas of the steel skirt, use the same shades as in the previous step, with more precise strokes. Then, add SART43 Vanilla White for maximum outlines
and highlights and SART16 Green Grey for maximum shadows.
16. We emphasize the maximum points of highlight with SC102 Inktense White + SART43 Vanilla White and SART02 Art Black for shadow outlining. We also add rust
tones with SART40 Raw Umber + SART42 Burnt Sienna.
18. The lower clothing, which was painted with the SART46 pastel Green base, can be painted with SART46
pastel Green + SART13 Buff for the first highlights and SART01 Art White for the second highlight. For
shadows, use heavily thinned SART16 Green Grey, in order to highlight textures. Paint the steel boots with a
base of SART15 Violet Grey + SART16 Green Grey + SART40 Raw Umber, and then add SART01 Art White
progressively to illuminate.
SWORD
20. Use SART15 Violet Grey + 21. Sketch the highlights and shadows. 22. Use two mixtures, SART45 Pastel 23. As a final adjustment, outline
SART26 Turquoise Blue + SART38 Add SART43 Vanilla White for the Violet + SART26 Turquoise Blue and highlight and glow with SC102
Burnt Umber to create the sword’s highlight areas and SART26 Turquoise SART38 Burnt Umber + SART26 Inktense White. Then, paint the
base color. Blue + SART16 Green Grey for the Turquoise Blue to unify highlight and maximum shadow with SART02
shadows. shadow planes. Additionally, enhance the Art Black.
highlights by adding SART01 Art White,
and the shadows by mixing SART16
Green Grey + SART38 Burnt Umber.
26.
Enhance highlights by adding
SC102 Inktense White, and
shadows using SART38
Burnt Umber.
24. For the grip, look for a cold gold shade that 25. First highlight can be created by adding
matches the setting. Mix SART19 Intense Yellow + SART43 Vanilla White + SART45 Pastel Violet
SART20 Yellow Ochre + SART31 Light Moss Green + to the base color. First shadow can be created by
SART38 Burnt Umber for the base color. adding SART38 Burnt Umber to the base color.
SFX04 SFX05
SHIELD
27. Paint the base color of the wooden 28. Saturate shadows with SART38 29. Enhance
highlights with SART39 30. Apply a medium shade to nuance
shield with SART38 Burnt Umber + Burnt Umber. Wood + SART14 Pearl Grey. the wood down, using SART24 Purple
SART39 Wood. To take advantage of + SART41 Dark Brown Ochre. Then,
the modeling texture, apply it as a glaze. outline spaces between the wood
Add strokes towards the edges, keeping planks, as well towards the edges,
all highlight areas at the center. with SART26 Turquoise + SART41
Dark Brown Ochre.
31. Try to achieve the same shade as 32. For the highlights, add SART43 33. Create a medium shade, which can
the sword grip to create a base color Vanilla White + SART45 Pastel Violet be drawn towards the shadow area, using
for golden areas. SART19 Intense to the base color. For the shadows, add SART31 Light Moss Green + SART38
Yellow + SART20 Yellow Ochre + SART38 Burnt Umber. Burnt Umber. Outline maximum
SART31 Light Moss Green + SART38 highlight and glow using SC102 Inktense
Burnt Umber. White. SART38 Burnt Umber can be
used for maximum shadows.
34.
Rust can be painted with SFX04
Electric Blue + SFX05
Techno Green.
min ip edia
SART36 SART37 SART41 SART06 SART43 SART31
BOW
35. The leather bow case has a glazed base, using SART36 Earth
Green + SART37 Red Ochre.
36. For shadows, use SART36 Earth Green + SART41 Dark Brown
Ochre + SART06 Burnt Sienna Umber.
piel
1. Empezaremos tapando los puntos de unión de las 2. Buscaremos un tono de piel agrisado para 3. Lassombras las haremos con aerógrafo, SART24
distintas piezas con blue-tack para que la pintura potenciar el ambiente, base de aerógrafo SART07 Purple + SART26 Turquoise Blue + SART39 Wood.
posterior no impida su correcto pegado. Una vez Pink Flesh + SART26 Turquoise Blue + SART39
hecho esto daremos una doble imprimación negro/ Wood. Añadiremos SART08 Golden Flesh +
blanco con aerógrafo. SART43 Vanilla White y con aerógrafo en posición
cenital daremos las primeras luces.
4. Pasaremos al trabajo de pincel. Usaremos SART39 Wood + SART43 Vanilla White, forzaremos el volumen
dando trazados hacia la dirección de la máxima exposición de luz.
min ip edia
SART26 SART41 SART16 SART07 SART24 SART32 SART47 SART44
cueros y telas
5. Pintaremos
las sombras del rostro también a pincel, las aplicaremos velando suave hacia la zona de máxima sombra con SART26 Turquoise Blue + SART41
Dark Brown Ochre. Pintaremos la base del pelo para ayudarnos con el encuadre de la cara usando SART16 Green Grey + SART26 Turquoise Blue.
6. Usaremos dos tonos medios para matizar la piel entre los planos de luz y sombra, un tono rojizo SART07 Pink Flesh + SART24 Purple y un segundo tono
verdoso con SART07 Pink Flesh + SART32 Spring Green.
7. Pintaremos los ojos empezando por el glóbulo ocular con SART47 OffWhite, el iris con SART16 Green Grey, añadiremos SART26 Turquoise Blue para iluminar y
por último añadiremos SC102 Inktense White a modo de brillo. Trabajaremos el pelo sobre la base previa, pintaremos las luces con SART16 Green Grey + SART44
Artic Blue y las sombras con SART16 Green Grey + SART41 Dark Brown Ochre.
cueros y telas
8. El color base para las cintas de cuero del pecho 9. Para imitar un cuero envejecido, añadiremos a la 10. Usaremos tintas para satinar las sombras de
lo pintaremos con SART40 Raw Umber + mezcla anterior SART43 Vanilla White para iluminar las cintas con SC95 Inktense Brown y
SART41 Dark Brown Ochre. y trazaremos rayas para simular cortes y texturas. SC99 Inktense Cyan.
Perfilaremos los cantos con SART43 Vanilla White +
SART26 Turquoise Blue.
11. Pintaremos el resto de elementos con los colores base para comprobar como funcionan entre sí, 12. Ahora pasaremos a definir los distintos elementos.
utilizaremos para las zonas de cuero rojizo SART24 Purple + SART41 Dark Brown Ochre, para las cintas Pintaremos una primera luz al cinturón de cuero rojizo con
de cuero verticales aplicaremos SART40 Raw Umber, el cuero verde con SART30 Prussian Blue + SART40 SART41 Dark Brown Ochre + SART20 Yellow Ochre, añadiremos
Raw Umber, las zonas de acero SART15 Violet Grey + SART16 Green Grey y para el pelaje inferior usaremos SART45 Pastel Violet para perfilar esa luz, para las sombras SC81
SART46 Pastel Green. Inktense Chestnut + SC82 Inktense Violet. Las cintas de cuero
verticales usaremos el mismo tratamiento y colores que para el
cuero del pecho, también daremos una base a las chapas de bronce
mezclando SART41 Dark Brown Ochre + SART42 Burnt Sienna.
15. Para definir bien todas las zonas del faldón de acero, usaremos los mismos tonos que en el paso anterior, con trazadas más precisos, además añadiremos SART43
Vanilla White para perfilados y golpes máximos de luz y SART16 Green Grey para las sombras máximas.
16. Potenciamos los puntos máximos de luz con SC102 Inktense White + SART43 Vanilla White y SART02 Art Black para el perfilado de sombra. Añadimos también
tonos de óxido con SART40 Raw Umber + SART42 Burnt Sienna.
18. El pelaje inferior con la base previa de SART46 pastel Green, lo pintaremos con SART46 pastel Green +
SART13 Buff para las primeras luces y añadiremos SART01 Art White como segunda luz. Para las sombras
usaremos SART16 Green Grey muy diluido para resaltar la textura. Pintaremos las botas de acero con una
base de SART15 Violet Grey + SART16 Green Grey + SART40 Raw Umber, al que iremos añadiendo SART01
Art White progresivamente para iluminar.
espada
20. Color base de la espada, SART15 21. Abocetaremos las luces y sombras, 22. Usaremos dos mezclas, SART45 23. Como ajuste final perfilaremos
Violet Grey + SART26 Turquoise Blue para ello, añadiremos SART43 Vanilla Pastel Violet + SART26 Turquoise Blue luz y brillo con SC102 Inktense White
+ SART38 Burnt Umber. White para las zonas de luz y SART26 y SART38 Burnt Umber + SART26 y pintaremos la sombra máxima con
Turquoise Blue + SART16 Green Grey Turquoise Blue para unificar los SART02 Art Black.
para las sombras. planos entre luces y sombras. Además
reforzaremos las luces añadiendo
SART01 Art White y las sombras
mezclando SART16 Green Grey +
SART38 Burnt Umber.
26.
Forzaremos la luz
añadiendo SC102 Inktense
White y la sombra con
SART38 Burnt Umber.
24. Para la empuñadura buscaremos un tono 25. Primera luz añadiendo a la base SART43
de oro frío para continuar con la ambientación, Vanilla White + SART45 Pastel Violet. Primera
mezclaremos para el color base SART19 Intense sombra añadiendo al color base SART38
Yellow + SART20 Yellow Ochre + SART31 Light Burnt Umber.
Moss Green + SART38 Burnt Umber.
SFX04 SFX05
escudo
27. El color base de la madera del 28. Saturaremos la sombra con 29. Resaltaremos
las luces con 30. Aplicaremos un tono medio para
escudo la pintaremos con SART38 Burnt SART38 Burnt Umber. SART39 Wood + SART14 Pearl Grey. matizar la madera con SART24
Umber + SART39 Wood. Lo aplicaremos Purple + SART41 Dark Brown Ochre.
por transparencia para aprovechar la Perfilaremos entre los tablones con
textura del modelado, además haremos SART26 Turquoise + SART41 Dark
trazados hacia los bordes reservando la Brown Ochre también hacia
zona de luz en el centro. los bordes.
31. Elcolor base para las zonas 32. Para las luces añadiremos al 33. Tono medio trazando hacia la
doradas, buscaremos el mismo tono color base SART43 Vanilla White + zona de sombra con SART31 Light
que para la empuñadura de la espada. SART45 Pastel Violet. Para las sombras Moss Green + SART38 Burnt
SART19 Intense Yellow + SART20 añadiremos SART38 Umber. Perfilado de luz y brillo
Yellow Ochre + SART31 Light Moss Burnt Umber. máximo SC102 Inktense White.
Green + SART38 Burnt Umber. Sombra máxima SART38
Burnt Umber.
34.
Los óxidos los pintaremos con
SFX04 Electric Blue + SFX05
Techno Green.
min ip edia
SART36 SART37 SART41 SART06 SART43 SART31
arco
35. El cuero de la funda del arco llevará una base aplicada por
transparencia con SART36 Earth Green + SART37 Red Ochre.
36. Sombras
SART36 Earth Green + SART41 Dark Brown Ochre +
SART06 Burnt Sienna Umber.
37. Las luces en el cuero las haremos añadiendo al color base SART43
Vanilla White. Para el tono intermedio unificaremos con SART31
Light Moss Green + SART41 Dark Brown Umber.
SCAL E75
35 mm
SART07 SART08 SART37 SART09 SART43 SART20
FLESH
1. For the skin base color, mix 3. Highlights can be painted with
SART07 Pink Flesh + SART08 Golden a mixture of SART09 Light Skin +
Flesh. Look for a slightly pinkish SART43 Vanilla White.
shade, applying it with a certain
transparency. This shade can also be
used on the stockings, but with higher
thinning.
min ip edia N AN CY • sc a l e 75 35 m m
SART43 SART01 SART30 SART07 SART37 SART10
HEAD
6. Hair base color can be painted with SART15 Violet Grey + SART45 Pastel 7. Add SC102 Inktense White to the previous mix to paint the highlights, and
Violet + SART01 Art White. SART 45 Pastel Violet and a small amount of SART27 Cobalt Blue for the
shadows.
8. Glasses have two parts. For the leather strap, use SART16 Green Grey + 9. In order to simulate the crystal effect, invert the position of the highlights
SART43 Vanilla White for the base color. Then, add SART01 Art White for and shadows. Add SART43 Vanilla White to the previous base color to paint
the highlights and SART16 Green Grey for the shadows. Once the leather is the highlight, and SART30 Prussian Blue for the shadow. Finally, paint the
painted, apply a color base to the glass with SART32 Spring Green + SART26 highlight points inside the shadow area by imitating small flashes, using
Turquoise Blue. SC102 Inktense White.
min ip edia N AN CY • sc a l e 75 35 m m
SART24 SART30 SART45 SART43 SART23 SART25 SART26
CLOTHES
10. Paint the base color of the dress as a whole to see the different elements in their entirety. Use three shades: for the skirt and brassier, use SART24 Purple; for
the corset, SART24 Purple + SART30 Prussian Blue; and for the shirt, SART45 Pastel Violet + SART43 Vanilla White.
11. Move on to work on the complete dress. Paint highlights of the skirt and brassier with SART23 Magenta + SART43 Vanilla White. For the shadows, use SART25
Dark Violet. The highlights on the corset can be painted with SART24 Purple + SART26 Turquoise Blue + SART45 Pastel Violet. For the shadows, use SART30
Prussian Blue. The highlights on the shirt can be painted with SART43 Vanilla White, and for the shadow, use SART45 Pastel Violet + a small amount of SART30
Prussian Blue.
min ip edia N AN CY • sc a l e 75 35 m m
SART39 SART26 SC102 SART33 SART43 SART30 SART10
CLOTHES
12. Once the dress is finished, add the little details on the torso. On the belts, use SART39 Wood + SART26 Turquoise Blue as base color, then add SC102 Inktense
White to outline the highlight. For the collar, use a base color of SART33 Emerald Green; then, SART43 Vanilla White for the highlights and SART30 Prussian
blue for shadow outlining. Paint the small jewel on the necklace with SART10 Crimsom; then, add a small highlight spot with SC102 Inktense White.
13. Paint the stockings over the previous skin base, 14. Draw small breaks in the stockings with the SART07 Pink Flesh + SART08 Golden Flesh skin base
shading with SART16 Green Grey + SART07 Pink color, and draw lines with the same color as the stockings to represent the threads. Paint the boots with
Flesh. Apply thinned paint and make lines towards a SART16 Green Grey base color; then, paint highlights with SART26 Turquoise Blue + SART43 Vanilla
the shaded areas. Try to create a transparent effect. White. For the shadows, use SC79 Inktense Black.
Add more SART16 to enhance the shadows. As a
final step, enhance highlights by adding SART09
Light Skin to the base color.
min ip edia N AN CY • sc a l e 75 35 m m
SART15 SART40 SART14 SART16 SC102 SART30
STEEL FIST
15. The base color for steel areas on the fists can be 16. Apply a highlight/shadow sketch over this base. Add SART14 Pearl Grey over the base color to paint
painted by mixing SART15 Violet Grey + SART40 the highlights, and use SART16 Green Grey for the shadows.
Raw Umber
17. For the intermediate shade, mix SART15 Violet Grey + SART16 Green Grey + SART40 Raw Umber. To outline the first highlight use SART14 Pearl Grey.
18. Paint the final outlines and maximum highlight glows with SART14 Pearl Grey + SC102 Inktense White, use SART16 Green Grey + SART30 Prussian Blue for
the shadow.
min ip edia N AN CY • sc a l e 75 35 m m
SART19 SART20 SART07 SART17 SART42 SART45 SART01
STEEL FIST
19. The base color for golden areas can be made by 20. For first highlights, add SART17 Vanilla 21. Enhance highlights with SART17 Vanilla
mixing SART19 Intense Yellow + SART20 Yellow Yellow to the previous mixture. Yellow + SART19 Intense Yellow + SC100 Inktense
Ochre + SART40 Raw Umber. Apply two thin and Lime. Apply shadows to create contrast, using
uniform coats. SART40 Raw Umber + SART30 Prussian Blue.
Finally, add a medium shade to make transitions
smoother with SART40 Raw Umber + SART42
Burnt Sienna.
22. As a last step, outline the highlight with 23. Paint the luminous sphere over a white base 24. Darken the sphere’s contour maintaining the
SART43 Vanilla White, and use SART40 Raw with SART45 Pastel Violet + SART01 Art White center with the previous shade. Use SART45 Pastel
Umber + SART16 Green Grey for the shadows. Violet + SFX03 Psychedelic Purple.
25. Reduce spacing and create a gradient using SFX03 Psychedelic Purple. 26. Cover the white areas with SFX02 Acid Pink, applying thin and controlled
glazes. Then, enhance the sphere’s highlight point with SC102 Inktense White.
min ip edia N AN CY • sc a l e 75 35 m m
SART45 SFX03 SFX02
27. Glue the arms together and move on to the final adjustments. Outline steel parts, creating shadows with SART02 Art Black.
min ip edia N AN CY • sc a l e 75 35 m m
SART02 SART15 SART45 SART09
FINAL PHOTOS
scale75.com • scale75usa.com
SART07 SART08 SART37 SART09 SART43 SART20
piel
1. Para el color base de la piel usaremos 3. Las luces las pintaremos con
una mezcla de SART07 Pink Flesh + una mezcla de SART09 Light Skin +
SART08 Golden Flesh para buscar SART43 Vanilla White.
un tono algo rosado y lo aplicaremos
con cierta transparencia. También
aplicaremos este tono sobre las medias
pero con una disolución mayor.
min ip edia N AN CY • sc a l e 75 35 m m
SART43 SART01 SART30 SART07 SART37 SART10
cabeza
6. El color base del pelo lo pintaremos con SART15 Violet Grey + SART45 7. Añadiremos a la mezcla anterior SC102 Inktense White para las luces y
Pastel Violet + SART01 Art White. SART 45 Pastel Violet, más una pequeña cantidad de SART27 Cobalt Blue,
para las sombras.
8. Las gafas tendrán dos partes. La cinta de cuero en la que usaremos 9. Para lograr simular el efecto cristal invertiremos la posición de las luces y
SART16 Green Grey + SART43 Vanilla White para el color base, y añadiremos sombras. Al color base anterior añadiremos SART43 Vanilla White para la luz
SART01 Art White para las luces y SART16 Green Grey para las sombras. y SART30 Prussian Blue para la sombra. Terminaremos pintando los puntos
Una vez pintado el cuero daremos una base de color a los cristales con SART32 de luz dentro de la zona de la sombra imitando pequeños destellos, para los
Spring Green + SART26 Turquoise Blue Blue. que usaremos SC102 Inktense White.
min ip edia N AN CY • sc a l e 75 35 m m
SART24 SART30 SART45 SART43 SART23 SART25 SART26
ropa
10. Pintaremos el color base del vestido en conjunto para ver los distintos elementos en su totalidad. Usaremos tres tonos: para la falda y el sujetador SART24
Purple, para el corsé SART24 Purple + SART30 Prussian Blue y para la camisa SART45 Pastel Violet + SART43 Vanilla White.
11. Seguiremos trabajando en conjunto el vestido. Las luces de la falda y el sujetador con SART23 Magenta + SART43 Vanilla White y para las sombras SART25 Dark
Violet. Las luces del corsé las pintaremos con SART24 Purple + SART26 Turquoise Blue + SART45 Pastel Violet y para las sombras, SART30 Prussian Blue. Las luces
de la camisa irán con SART43 Vanilla White y la sombra con SART45 Pastel Violet más una pequeña cantidad de SART30 Prussian Blue.
min ip edia N AN CY • sc a l e 75 35 m m
SART39 SART26 SC102 SART33 SART43 SART30 SART10
ropa
12. Una vez terminado el vestido, acabaremos los pequeños detalles del torso. En los cinturones usaremos como color base SART39 Wood + SART26 Turquoise
Blue, añadiremos SC102 Inktense White para los perfilados de luz. Para el collar usaremos un color base de SART33 Emerald Green, al que añadiremos SART43
Vanilla White para las luces y SART30 Prussian Blue para los perfilados de sombra. Pintaremos también la pequeña joya que lleva el collar con SART10 Crimson
al que añadiremos un pequeño punto de luz con SC102 Inktense White.
13. Las medias las pintaremos sobre la base previa 14. Dibujaremos pequeños rotos en las medias con el color base de la piel SART07 Pink Flesh + SART08
de piel sombreando con SART16 Green Grey + Golden Flesh y cruzaremos líneas del color de la media para representar los hilos. También pintaremos las
SART07 Pink Flesh, aplicaremos la pintura diluida botas con un color base de SART16 Green Grey, las luces con SART26 Turquoise Blue + SART43 Vanilla
y haremos trazos hacia las zonas de sombra, White, y para las sombras usaremos la tinta SC79 Inktense Black.
insistiendo para simular las transparencias.
Añadiremos mayor cantidad de SART16 Green
Grey para potenciar las sombras. Como último
paso, realzaremos la luz añadiendo SART09 Light
Skin al color base.
min ip edia N AN CY • sc a l e 75 35 m m
SART15 SART40 SART14 SART16 SC102 SART30
puño de acero
15. El color base para las zonas de acero de los 16. Sobre esta base aplicaremos un boceto de luz/sombra. Añadiremos al color base SART14 Pearl Grey
puños metálicos los pintaremos mezclando SART15 para las luces y SART16 Green Grey para las sombras.
Violet Grey + SART40 Raw Umber.
17. Para el tono intermedio mezclaremos SART15 Violet Grey + SART16 Green Grey + SART40 Raw Umber. Para los primeros perfilados de luz usaremos
SART14 Pearl Grey.
18. Últimos perfilados y brillos máximos de luz con SART14 Pearl Grey + SC102 Inktense White y de sombra con SART16 Green Grey + SART30 Prussian Blue.
min ip edia N AN CY • sc a l e 75 35 m m
SART19 SART20 SART07 SART17 SART42 SART45 SART01
puño de acero
19. El color base de las zonas doradas las 20. Para las primeras luces añadiremos SART17 21. Forzaremos las luces con SART17 Vanilla
pintaremos con SART19 Intense Yellow + SART20 Vanilla Yellow a la mezcla anterior. Yellow + SART19 Intense Yellow + SC100 Inktense
Yellow Ochre + SART40 Raw Umber. Aplicaremos Lime, también aplicaremos sombras para forzar
dos capas finas y uniformes. el contraste con SART40 Raw Umber + SART30
Prussian Blue. Añadiremos por último un tono
medio para suavizar las transiciones con SART40
Raw Umber + SART42 Burnt Sienna.
22. Como último paso perfilaremos la luz con 23. Pintaremos la esfera luminosa sobre una 24. Oscureceremos el contorno de la esfera
SART43 Vanilla White y en sombra SART40 Raw base blanca con SART45 Pastel Violet + SART01 manteniendo el centro con el tono anterior, para
Umber + SART16 Green Grey. Art White. ello usaremos SART45 Pastel Violet + SFX03
Psychedelic Purple.
25. Reduciremos el espacio para formar un degradado usando SFX03 26. A modo de veladuras finas y controladas cubriremos las zonas blancas con
Psychedelic Purple. SFX02 Acid Pink. Una vez hecho esto realzaremos el punto de luz de la esfera
con SC102 Inktense White.
min ip edia N AN CY • sc a l e 75 35 m m
SART45 SFX03 SFX02
esfera y ajustes
min ip edia N AN CY • sc a l e 75 35 m m
SART02 SART15 SART45 SART09
fotos finales
scale75.com • scale75usa.com