Professional Documents
Culture Documents
Mechanical Properties
Component No: HV563DH12 A563 DH HV 1/2-13 ASME B18.2.2 HEAVY HEX NUT MADE IN USA
Processed as Lot No: E643B1
Shipped Lot No: E643B1 Proof Load (lbf) Stress Area
Lot Grouping: E643B1 24833 (in²)
0.1419
Test Results Sample Sample Sample
Sample Size
Minimum Maximum Average
Core Hardness, HRC 28.0 29.0 28.3 3
NUT PROOF, PSI 187000 191000 189000 3
Component Test(s) Passed
Unless noted below or elsewhere in this test report: All A325 and A490 Type 1 & 3 Product manufactured to ASTM F3125.
Thread fit and dimensional in accordance to ASTM B18.2.6. This product was manufactured and tested in the USA. Product
was manufactured from USA domestic material melted in the USA. Product was not produced from heats in which Bismuth,
Selenium, Tellurium, or Lead was intentionally added. Product was not exposed to Mercury or any other metal alloy that is
liquid at ambient temperature during processing or while in our possession. Sampling plan in accordance to ASTM F1470.
Product passed a surface discontinuity inspection per ASTM F788. Test methods in accordance to ASTMF606/ISO 898-1
where applicable. Thread fit and dimensional properties are compliant to ASME B18.2.1. Results reported in the mechanical
properties section were determined in accordance with the following test methods: ASTM A370, E18, F606/M. For Structural
A490 product only: Product passed decarb/carburization test per ASTM F2328. Type1 and Type 3 bolts passed magnetic
particle inspection for surface discontinuities per ASTM E709 and E1444 and F788.
Applicable to ASTM A563 Type DH,DH1,DH3,C product only: Test methods in accordance with ASTM F606. Decarb\Carb test
in accordance to ASTM F2328. Thread fit and dimensional properties are compliant to ASME B18.2.2. This lot was
manufactured according to ASTM A563 . Mechanical properties are in accordance with ASTM A563. This product was
manufactured in the USA from domestic material and was not produced from material in which Bismuth, Selenium, Tellurim, or
Lead was intentionally added. This material was not exposed to Mercury or any other metal alloy that is liquid at ambient
temperature during processing or while in our possession.
Report No: 46590 FAI Item: HV563DH12 Customer Item: VDH050 Lot No: E643B1 Created: 11/1/2021 3:30:05 PM Page 1 of 6
We certify: The product furnished was manufactured, sampled, tested and inspected in accordance with the standards and specifications listed in
this report along with the Fontana America, Inc (FAI) Quality Manual, Procedures and Instructions in effect as of the date of manufacture. The
included data accurately represents values provided by FAI suppliers and/or values generated in one of FAI's A2LA accredited laboratories.
Statistical process control data is on file as required.This product was manufactured and tested in the USA. Product was manufactured from USA
domestic material melted in the USA. Product was not produced from heats in which Bismuth, Selenium, Tellurium, or Lead was intentionally
added. Product was not exposed to Mercury or any other metal alloy that is liquid at ambient temperature during processing or while in our
possession.Acument Global Technologies, Inc., Fontana Fasteners, Inc. (formerly LE USA (Lake Erie Products), Camcar LLC, Ring Screw LLC
and Saturn Fasteners Inc. are all subsidiaries or divisions of Fontana America Inc. (FAI) which conducts business in the United States under a
common management structure as part of Fontana Gruppo.
This test report relates only to the sample tested above. This document may only be reproduced unaltered and may not be used for any purpose
other than the purpose of certifying the same or lesser quantity of the product specified herein. Reproduction, alteration, or use of this document
for any other purpose is prohibited, except as expressly provided in this certification. FAI makes no (and disclaims all) representations, warranties
and guarantees whatsoever, whether express, implied or statutory, including, without limitation, any warranty of merchantability or fitness for a
particular purpose. This product certification report complies to EN10204 Type 3.1 requirements. Approval signatures are maintained
electronically and available upon request.
Quality Management System including Test Reports managed by: Brian Lewis - Quality Manager
Report No: 46590 FAI Item: HV563DH12 Customer Item: VDH050 Lot No: E643B1 Created: 11/1/2021 3:30:05 PM Page 2 of 6
FAI Shipped Lot No: E643B1 Component Item: 6T4720012S Heat/Lot: 673E - 10704580
Report No: 46590 FAI Item: HV563DH12 Customer Item: VDH050 Lot No: E643B1 Created: 11/1/2021 3:30:05 PM Page 3 of 6
FAI Shipped Lot No: E643B1 Component Item: 6T4720012S Heat/Lot: 673E - 10704580
Report No: 46590 FAI Item: HV563DH12 Customer Item: VDH050 Lot No: E643B1 Created: 11/1/2021 3:30:05 PM Page 4 of 6
FAI Shipped Lot No: E643B1 Component Item: 6T4720012S Heat/Lot: 673E - 10704580
Report No: 46590 FAI Item: HV563DH12 Customer Item: VDH050 Lot No: E643B1 Created: 11/1/2021 3:30:05 PM Page 5 of 6
FAI Shipped Lot No: E643B1 Component Item: 6T4720012S Heat/Lot: 673E - 10704580
Report No: 46590 FAI Item: HV563DH12 Customer Item: VDH050 Lot No: E643B1 Created: 11/1/2021 3:30:05 PM Page 6 of 6