Professional Documents
Culture Documents
: :,
,:::::::: ::` ::: :::
,:::::::: ::` ::: :::
.,,:::,,, ::`.:, ... .. .:, .:. ..`... ..` .. .:, .. :: .::, .:,`
,:: ::::::: ::, :::::::
`:::::::.,:: ::: ::: .:::::: ::::: :::::: .::::::
,:: :::::::: ::, :::::::: ::::::::.,:: ::: ::: :::,:::, ::::: ::::::, ::::::
::
,:: ::: ::: ::, ::: :::`::. :::.,:: ::,`::`::: ::: :::
`::,` ::: :::
,:: ::. ::: ::, ::` :::.:: ::.,:: :::::: ::::::::: ::` :::::: :::::::
::
,:: ::. ::: ::, ::` :::.:: ::.,:: .::::: ::::::::: ::` :::::::::::::
::
,:: ::. ::: ::, ::` ::: :::
`:::.,:: :::: :::` ,,, ::` .:: :::.::. ,,,
,:: ::. ::: ::, ::` ::: ::::::::.,:: :::: :::::::` ::` ::::::: ::::::
:.
,:: ::. ::: ::, ::` ::: :::::::`,:: ::. :::::` ::` :::::: :::::
.
::, ,:: ``
::::::::
::::::
`,,`
https://www.thingiverse.com/thing:2004629
CiiiCooler for Wanhao Duplicator i3 / Maker Select by Pawpawpaw85 is licensed under
the Creative Commons - Attribution - Non-Commercial - No Derivatives license.
http://creativecommons.org/licenses/by-nc-nd/3.0/
# Summary
The CiiiCooler is a cooler that is to be mounted around the hotend of the Wanhao
Duplicator i3.
It provides a 300 degree field of cooling around the hotend for the part being
printed.
It sacrifices 60 degree of field compared to the DiiiCooler, but provides a view of
the nozzle and a more even flow of air around the nozzle compared to a directional
or bi-directional cooler.
Print this item without support; in ABS, PET-G or other filaments that can stand a
bit of heat.
(PLA has worked when testing the prototypes, but use it at your own risk.)
Print the CiiiCooler with the flat bottom down against the bed.
[REQUIRED HARDWARE]
1 pcs M4x20 screw
1 pcs M4 nut (or locknut)
2 pcs M4x12 (For V1.0 and V2.0 Owners)
2 pcs M4x25 (For V2.1 Owners)
1 pcs CiiiCooler_Adapter_V2-1 (For V2.1 Owners, from download scection)
1 pcs 51x51x15 mm radial fan (Look at Delta BFB0512HH for dimensions datasheet)
[NOZZLE DISTANCE]
The recommended distance from under the flat surface of cooler to the tip of the
nozzle is 1-3mm for optimal performance.
[DONATIONS]
If you find that the item improve your daily life, consider supporting the designer
by sending a tip.
<a href="http://www.thingiverse.com/Pawpawpaw85/about" rel="nofollow"> Click "TIP
DESIGNER" here.</a>