NONDESTRUCTIVE EXAMINATION REFERENCES
PARA. REQUIREMENTS/REMARKS, PT MT UT RT
UG-24 General requirements for castings xX X X Xx
UG-93 General requirements for the inspection of all.....X -X
materials,
UW-11 Radiographic and ultrasonic examination 1.00 xX xX
required for pressure vessels and vessel parts
{also see UW-51, UW-52)
UW-42 Surface weld metal buildup... x x
UW-50 Welds on pneumatically tested vessels... x
UF-31 Vessels fabricated from SA-372 forging mater x
to be liquid quenched and tempered
UP-32 ished welds after postweld heat treatment.....X X
UF-37 Repair welds in forgings... x x x
UB-55 Vessels constructed of SA-372 Class VIL material... x
UCS-57 Examination in addition to UW-11 for butt
welded joints on carbon and low alloy steel
pressure vessels and vessel parts
UNF-57 Examination in addition to UW-11 for pressure... x
vessels and vessel parts constructed of
nonferrous materials,
UNF-58 All groove and fillet welds in vessels.
constructed of certain nonferrous materials,
UHA-33 Exceptions for radiographic examinations of x
high alloy steel vessels
UHA-34 — Austenitic chromium-nickel alloy steel butt...
and fillet welds
UGE78 Repair of defects in east iron pressure vessels.....X x
and vessel parts
_ Qualifications of Personnel Performing
Section VIII, Division 1 Nondestructive Examinations
Examination Reference Examination Reference
PT Appendix 8 ur Appendix 12
MT Appendix 6 RT UW-S51
PARA.
UCL-35
UCL-36
UCD-78
UHTS7
UHT:S3
UHESS
ULW-S1
ULW52,
ULW-53
ULW.54
ULW.s5
ULW-56
ULW.57
ULTS?
REQUIREMENTS/REMARKS
‘Vessels or parts of vessels constructed of clad..
plate and those having applied corrosion
resistant linings
Chromium stainless steel cladding or lining.
Repair of defects in cast ductile iron pressure
vessels and vessel parts
Pressure vessels or vessel parts constructed of
ferritic steels having tensile properties enhance
by heat treatment
‘Metal removal accomplished by methods...
involving melting on pressure vessels and vessel
parts constructed of ferritic steels having
tensile properties enhanced by heat treatment
Removal of temporary welds on pressure .
vessels and vessel parts constructed of ferric
steels having tensile properties enhanced by
heat treatment
Inner shells and inner heads of layered
pressure vessels
Welded joints in the layers of layered pressure...
vessels
Step welded girth joints in the layers of layered ...
pressure vessels
Butt welded joints in layered pressure vessels.
Flat head and tube sheet welded joints...
in layered pressure vessels
Nozzle and communicating chamber welded.
joints in layered pressure vessels
Random spot examinations and repairs of welds..
in layered pressure vessels
Welds in pressure vessels and vessel parts con-
structed of materials having increased design
stress values due to low temperature applications
PT MT UT RT
x
x
“