ANNEKUAE- A
~ SYLLABUS FOR DIRECT RECRUITMENT OF PRINCIPAL, ITI, GROUP-'B , GAZETTED UNDER THE
e DEPARTMENT OF INDUSTRIES AND COMMERCE, GOVT. OF TRIPURA
Tag Examination will comprise of Two successive stages viz. (i) Written Examination (Multiple Choice
1% Test) carrying 170 marks and (i) An Interview cum Personality Test carrying 30 marks.
(A) Scheme of the Written Examination: The Written Examination will consist of one paper viz. a paper
‘on "General Studies and Engineering Aptitude” . The paper will be of an Objective Type consisting of
170 Multiple- Choice Question. The paper will carry 170 marks and will be of Two and a half (2%)
hours duration. The paper consist of Two Paris, namely 1) Part-A General Studies (70 questions of 01
‘marks each) ii) Parl-B “General Engineering Aptitude” (100 questions of 01 marks each). There will be
Negative marks for MC@. For each question for which a wrong answer has been given by the
candidate, one-fourth of the marks assigned fo that question will be deducted as penalty,
(8) Details Syllabus for the written Examination:
Part-A General Studies
English Composition:- English Composition will cover Synonyms, Antonyms, Use of Common Phrase &
Idioms, Use of appropriate Preposition & Articles, Spotting Errors ett.
General knowledge : Question will include knowledge of indian History, Geography & Constitution
of India of such a nature which the candidate shall able to answer without any special study,
Question on Tripura and North Eastern States, its historian Topography will also be included.
Knowledge of Current Affairs :-Question will include the knowledge of current events of Local,
National & International important and of such matters of everyday observation and experiences in
their scientific aspect as may be expected of an educated person who has not made a special
study of any scientific subjects.
General Mental Ability:-Question will be set on logical perception. understanding and natural
conclusion etc.
Numerical Abllity:- Question on Numerical Ability wil be similar to that of the compulsory
Mathematics based on 10 standard,
Part-8 “General Engineering Aptitud
1. Basic Knowledge on Engineering Mechanics: System of forces, coplanar concurrent force
system, composition and resolution of force, equiliorium of rigid bodies, free body diagram,
Lami's theorem. Analysis of framed structure: Reaction in beam with different end conditions
‘determination of reactions in members of trusses: a) Analytical methods b) Graphical method
Centre of gravity and moment of inertia: Concept of C.G and centroid, position of centroid,
theorem of parallel and perpendicular oxes, moment of inertia of simple geometrical figures.
Stress and strain: Concept of stress and sirain, simple stresses, tensile, compressive. shear.
bending and torsion, stress- strain curves, elongation of bars, composite bars. thermal stresses,
elastic constants. Friction: Introduction, Laws of Coulomb friction, Equilibrium of bodies
involving dry fiction belt friction.
Engineering Graphics/Technical Drawing, Introduction to drawing
equipments and use of instruments, Conventions in drawing practice. Types of lines and their
uses, BIS codes for lines, Technical lettering as per BIS codes, Introduction to dimensioning,
Types, Concepts of scale drawing, Iypes of scales. Theory of Projections, Projection of Planes,
Projection of Solids, Isometric Projection, Orthographic Projection.
3. Fundamentals of Thermal Sclence: Introduction and scope of thermodynamics,
thermodynamics properties, forms of energy, thermodynamic systems and control volume,
steady fiow systems, types of work. thermodynamic processes, laws of thermodynamics,
Carnot theorem, concept of enthalpy & entropy. introduction to I.C. Engines: Iwo, four stoke
S.l.and C.l. engines. Otic ¢ycle, Diesel Basic idea of Refrigeration and Air Conditioning cycle.
Ce ape mes OF BO iy
84. Basic Knowledge on Workshop Science: . Measuring Instruments & gauges, Introduction to ®
manufacturing processes, Basic terminology used Economical and technological
considerations. Materials properties and their application: Different engineering materials,
Properties, Nomenclature, Basics of heat treatment. Fitting: Introduction, Tools used in fitting,
Measuring and marking tools, the process of making sawing, Filing, Tapping and die,
Introduction to dls. Welding: Introduction, Various welding processes with brief introduction,
Hectic Arc welding, Arc welding procedure, List of equipment for electric arc welding, Gas
, welding process and equipment, Soldering and Brazing process. Sheet metal working:
Introduction, Types of sheets (ferrous/non-ferous), Standard sheet sizes and their
measurement, Tools used in sheet metal. Metal cutting: Introduction, Classification of
machine tools and cutting tolls, Basic operations on lathe, Driling, Shaper, Milling, Cutting tool
material, Work-holding devices, Cutting parameters i.e. speed, feed and depth of cut.
5. Basic Electrical Science:- Network Laws and Theorems: Network Laws for D.C. networks
Kirchhotf's laws, Node voltage and mesh cuneni methods, Delta-Star and Star-Delia
conversion, Classification of network elements, Principle of Superposition, Thevenin's and
Norton's Theorems, Maximum Power Transter Theorem. Single Phase A.C. Circuits: Single.
phase EMF generation, Effective and Average values of sinusoids and determination of form
factor, Phasor diagram, Symbolic notation, phasor in polar, rectangular and exponential
form, Resisiive. Inductive and Capacitive circuits, A.C. series and parallel circuits. Analysis of
simple RUC-series circuits, Solution of parallel circuits - resonance, @ factor. Three Phase A.C.
Circuits: Three -phase EMF generation, Delta and siar connection, Line and phase quantities
Gnd relations, Solution of 3-phase circuits - balanced voltage and balanced load, Phasar
diagrams, Measurement of power in three-phase circuits. Magnetic Circuits and Transformers:
Analogy between electric and magnetic circuits, Magnetic Circuits, B-H Curve. Hysteresis
Loop, Solutions of simple problems, Inductances in series and parallel, Hysteresis and Eddy
Current losses. Transformers: constructional details. FMF equation. rating and phasor diagrams
and fulkload, Equivalent circuits, Requiotion and efficiency. Open-circuit and
" tests. Electrical Machines: Basic principles of EMF generation, three phase
Induction motors and their applications. Electrical insiruments: Basic principles of Moving iron
PMMC, dynamometer and Induction type instuments, torque equation, Dynamometer type
Watimeter, Induction type energy meter.
6. Basic Electronics & Communication Science:- Electronic Instruments: Role and importance of
general-purpose test instruments, Cathode Ray Oscilloscope {CRO}: Block diagram and
working of CRO, Cathode Ray Tube (CRT), Amplitude. frequency and phase measurements
using CRO. Semiconductor Diodes and Applications: Review of PN Junction Diode, Diode
Equivalent Circuits, V-1 Characteristics, Ideal diode. Zener Diode. Light-Emitting Diode (LED),
Varactor Diode, Power Diode, Tunnel Diode, Photodiode. Regulated Power Supply: Block
diagram of power supply, Halfwave, Fullwave and Bridge rectifiers, Passive filters, Regulators,
Line regulator and load regulators, Zener Diode as voltage regulator, concept of switched
mode power supply (SMPS). Bipolar Junction Transistor: Physical structure and modes of
operation, transistor configurations, Load line analysis, Transistor as a switch and as an
ampiifier, frequency response and bandwidth. Transistor Biasing, Introduction to. MOSFET.
Feedback and Oscillators: Concept of feedback, positive and negative feedback,
advantages of negative feedback, Basic principles of sinusoidal oscillators, Oscillation criteria,
LC and RC oscillators. Operational Amplifiers: Ideal Op-amp, Equivalent model, Open and
close Inverting, non-inverting and differential configurations, Applications of op-amp os
summing amplifier, differentiator and integrator. Digital Electronics: Number system and logic
gates, NAND and NOR as universal gates, combinational Circuits: Half adder, Full adder.
MUX, DEMUX, Encoder, Decoder, Sequential circuits: SR and JK flip-flops, idea about ROM,
RAM, and EPROM, Introduction of Microprocessor and Microcontroller and their Evolution.
Open Source Hardware Platforms (Arduino, Raspberry Fi). Introduction to lof.
7. Basic knowledge on Computer Science: introduction to Computers: Generation of
computers, Characteristic and classifications of computers. Components of Computer: CPU.
Various 0 Devices, Memory & its types . [Memory Hierarchy, Storage Media), Computer
Software and their types, Operating System. Computer Networks & Communication: LAN,
MAN, WAN, Network Topologies, Modes of Data Communication. Introduction to Internet
Ond its Safeguard: Inteme! Addresses, Domain Name System, URL, Web Browsers Search
Engines. Firewalls , Anti-Virus, Translators. Algorithm and flowchart: Algorithm and flow chart
characteristics, Sketching Flowcharls of various problems. Basics of C ProgrammingInkroduction 10 progremming paradigms, Siructure of C program, C programming: Dato
@ P25, Siorage classes, Constonis, Enumeration Constants. Keywords Operators: Precedence
and Associativity, Expressions, Input/Output statements, Assignment statements, Decision
making stalements, Switch statement, Looping statements, Pre-processor directives,
@ Compilation process
« (C)Distribution Marks for Written Examination:
Part-A : General Studies
Sl.No Topic Allotted Marks |
i English Composition Sse
[2 | General knowledge. 15
3 Knowledge of Current Affairs ae if |
[4 | General Mental Abili 10 |
‘5 __[ Numerical Abili 10
ama Total Ta 70 z
t-B General Engineering Aptitude
S.No Topic Allofted Marks
T Basic Knowledge on Engineering Mechanics 15
2__| Basic Engineering Drawing 10.
3 _| Fundamentals of Thermal Science 15 ea
[4 "TBasic Knowledge on Workshop Science 15
S| Basic Electrical Science 15 =
6 __| Basic Electronics & Communication Science I 15,
7___| Basic knowledge on Computer Science | 15 re
“Total = 100 pe
(0) Interview cum Personality Test: A limited no. of candidates, maximum 5{five) times of total posts
{in category wise) will be selected merit wise on the basis of the result of the Written Examination,
subject fo securing minimum qualifying marks (50% for UR candidates and 40% for reserved category
candidates ) or otherwise as fixed by Commission, The total marks for the Personality Test will be 30.1"
candidate remains absent in the personally Test, his/her candidature will be treated as cancelled
Final Mert List will be prepared on the bosis of the total marks obtained in the Waitten Examination
‘and marks obtained in the Personality Test.
Signature of the Committee Members
we
(Debashish Barmai (Gri Siddhartha Das)
Member h Member
Principal, WITI, Indranagar Principal, ITI, Indranagar Asst. Professor, TIT
‘Narsingarh
Representative of NIT, Agartala Tapan Das) Gai ae
Member Member Chairman
Manager (Credit), Directorate of [&C) Adal. Directorate of (8&0)
Page 3 of 3
é