Page 1 of 1
15406 ITEM NO: 1 WORK ORDER NO:VBD001-50500600-SPC DU NO:
BHARAT HEAVY ELECTRICALS LIMITED VALVE CODE No: 7105935
High Pressure Boiler Plant
TIRUCHIRAPPALLI - 620 014. Po P)0121723/5 0022
FORM III-C
CERTIFICATE OF MANUFACTURE AND TEST OF BOILER MOUNTINGS AND FITTINGS
(Regulation 4(g))
Centicate No 3a7073 DATE 21.12.2077
Design presure in Ky/Saem 260 Tyme Ten Presse a KeiSqem [390
Main dimension & Class: 1 Inch 1500 Class
Name of part:
HIGH PRESSURE DROP VALVE CS SW HW (25:40 mm
Customer's Name and Address: Body Material: SA105
ISGEC Heavy Engineering Ltd- Boiler
‘A-4 Sector 24, Drawing No: 3V562304929
Noida, UP
TMAWP = Maximum Alowabla Working Pressure in Kg/egem
Tillacune [ooeae | 200 7 300 | 400 1 426-1 «50 | «78 1 500 | 626 | 660 1 676 [ooo 12s
vawe» | 260 | 228 | 197 | 477 | ere] | Teeeeee reece reer
Pressure shown ot room lernperature fs teed value Other pressure valves Indosted in tobi ebove ore celeulted valve only.
Heat No SECHEVICAL COMPOSITION PHYSICAL TEST RESULTS | VALVE
Cc | Mn} Si P S| Cr |Mo/ Ni | Vv UTS eee. lary
0.220) 0.820] 0.200] 0.011] 0.022} 0.122] 0,00] 0.010) 0-002] 30 27 7
MPa
TOTAL NUMBER OF VALVES 1
Raw Material Details: Test Certificate No.:1524 & Date:13.07.2016
Size:1" BODY 5620 ‘Spec: SA105, Heat No.TEW £29306
Process of Manufacture:CLOSED DIE FORGING (Fully Killed)
Name of the Maker: THILLAT ENGINEERING WORKS.
Name of the Inspecting Authority: WELL KNOWN FORGE
Certified that the particulars entered herein by us are correct.The Valvels) hasthave) been designed end constructed to comply with
he indian Boller Regulations 960 for a maximum working pressure of 260 kg/Scom and maximum temperature as referred in table
nd satisigctory withstood # Hydraulic test using water or Kerasene to @ pressure of 390 kg/Sgcm on the 21st day of DECEMBER
017 in the presence of our responsible representative whose signature is appended hereunder.
(a
nu
JL.BENJAMIN PAULRAJ ‘C.ANAND
Deputy General Manager Deputy General Manager
‘uality Controt Valves Production
Maker's (Name & Signature)
Maker's Representative (Name & Signature)
Valvels) has(have) been constructed and tested in accordance with the requirements,
ity that tha particulars entered herein are correct,
Deputy Director of
BHEL, Trichy & Thirumayom Plants,
on behelt of
INSPECTING AUTHORITY
Director of Boilers, Tamil Nadu.
Name & Signature of the Inspecting Authority
We have satisfied ourselves and the
f the INDIAN BOILER REGULATIONS, 1960. Wo further ot
EER
Name & Signature of the Competent Person
Who, witness
pac{O0B/ TRICHY & THIRUMAYAM|
Date} “he