Professional Documents
Culture Documents
Question 1. Determine the shape of specimen if G1 is to remain constant with the growth of
crack. The specimen is loaded in the constant load mode. Determine the depth h of the specimen
beyond the crack tip if thickness of the specimen remain constant (B=30mm) the initial crack
length is 50 mm, modulus 207 Gpa and depth of each cantilever 12mm up to the initial crack
length.
Question 2. Define LEFM approach and also explain there advantage and disadvantage ?
Question 3. A large steel plate of an elastic, ideally plastic material (σy= 500Mpa) contain a
through thickness crack of total length 50mm(=2a). at a tension test of the plate crack was found
At which remote stress σ∞ would a 150mm long crack start to grow? Use the dugdal model of
crack tip opening displacement δ(a) as criterion for crack growth initiation(CTOD criterion) one
has
For the two cases 2a=50mm and 2a =150mm calculate the size (length) ρ of the plastic zone at
the tip when the stress is such that the crack start to propagate.
Address: University College of Engineering & Technology Campus, RIICO Karni Industrial Area, Pugal Road, Bikaner -334004
Phone: 0151-2250940, 50 Email: reg@btu.rajasthan.gov.in Web Site: http://btu.rajasthan.gov.in