Professional Documents
Culture Documents
Alarm Device List
Alarm Device List
or more microinvert
Id Username
1 SegioCelso
2 SegioCelso
3 SegioCelso
4 SegioCelso
Suggestions:
1) Check and validate microinverter registration information in the EMA.
2) Add/Delete microinverter(s) in the ECU via "ECU Setting" using the remote control function in the EMA.
3) Check microinverter status in the EMA to see if one or more inverters were under protection or turned off, and the
4) Review the problem microinverters' historical data to look for anomalies and troubleshoot.
5) If the microinverter cannot be recovered or reactivated to work properly, check to see if AC was disconnected (PL
6) At any point, contact your regional APsystems technical support (email and phone number available at www.apsy
7) Consider possible on-site maintenance.
Lo
f one or more microinverters in your solar installation was less than 10 W. This may be due to an inverter registration failure or
State City
Rio de Janeiro Campos dos Goytacazes
Rio de Janeiro Campos dos Goytacazes
Rio de Janeiro Campos dos Goytacazes
Rio de Janeiro Campos dos Goytacazes
Email Telephone
contato@bonafini.com.br 22997673237
contato@bonafini.com.br 22997673237
contato@bonafini.com.br 22997673237
contato@bonafini.com.br 22997673237
er entered protection mode, experienced a failure, or has been turned off. It could be caused by snow coverage on solar panels
ECU ID Inverter ID
216300003649 804000072420
216300003649 804000072420
216300003649 804000072420
216300003649 804000072420
coverage on solar panels and the system has no issue.
Channel
1
2
3
4