Professional Documents
Culture Documents
Loop-AM3440-D
Access DCS-MUX
Controller Variants
* Future Option
Loop-AM3440-D-CHPDa plug-in cards:
The mini-slot cards plug into the mini-slots of the AM3440-D-CHPDa. The single-slot cards plug into single
slots.
Low-Speed Controller
Tributary AM3440-CCPB-DCSa AM3440-CCPB-2GEa
Plug-in cards
Modules
Transportation
1-channel E1 (Single E1 interface)
with 75ohm
1-channel E1 (Single E1 interface)
Mini-Slot
with 120ohm
1-channel T1 (Single T1 interface)
2
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
Low-Speed Controller
Tributary AM3440-CCPB-DCSa AM3440-CCPB-2GEa
Plug-in cards
Modules
1-channel RS232
3-port RS232 card
Voice and Analog Access
Quad E&M (QEMA)
QFXSA (Four FXS voice interface)
QFXO (Four FXO voice interfaces)
QMAGA (Four magneto voice
interfaces)
Data Processing
Echo Canceller card
Analog Bridge card
2-LAN port/64 WAN port Router-A
Teleprotection Access
LS Optical M1C37 Card
Common Module
CLKa card
CLKb card
3
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
Loop-AM3440-D
Access DCS-MUX
Description
The Loop-AM3440-D is in the Loop Access DCS-MUX
series that combines various digital access interfaces
into E1/T1 lines for convenient transport and switching.
Features With 9 hot-pluggable mini size slots design, the
Loop-AM3440-D provides access for a variety of TDM,
IP, and voice interfaces and transports over GbE or
2U height, Full front access (ETSI) Shelf E1/T1 uplinks. These interfaces are compatible with
Support of DS0 DACS (Digital Access other Loop products. Furthermore, the AM3440 also
Cross-Connect System) with full cross-connect supports TDM circuit emulation protocols. TDM data
Dual controller, dual DC power with load sharing and voice services can be encapsulated as
1 for 1 protection, Y-BOX Pseudowires and transported over ETH/IP/MPLS
1 for 1 protection, E1, T1, FOM packet switch networks.
PDH ring protection, FOM, Mini QE1/QT1
Console, Telnet, SNMP, and Inband management With Loop products such as the AM3440-D, a DTE
support interface can be extended over copper wire pairs or
Craft interface port for connection to external LCD any E1/T1 transport facility. For each mini Quad E1/T1
display plug-in card, each card can have as many as DS0 124
Compatible to a SNMP-based GUI network time slots from RS232, X.21, and V.35 interfaces,
management system and supported by iNET and which can be multiplexed to fill 4 E1/T1 lines. The
Loop iNMS AM3440-D also supports fiber optical plug-in cards,
All the plug-in cards are hot-pluggable which can be used to aggregate up to 4 E1 channels
Support SAToP(CCPA T1 SAToP*), CESoPSN, and onto a single fiber optical interface to connect with
MEF8 for emulation of TDM circuits other AM3440 devices or O9310 devices.
Support GbE uplinks with CCPA controller installed
This unit is a full cross-connect and can act as a mini
DACS: one or more of the WAN ports can be used as a
Item AM3440-D Drop & Insert with fractional E1/T1 lines, which can
Chassis 2U then be multiplexed into a full E1/T1 line.
# of Mini-slots 9
Max. E1/T1 Ports 36 Redundancy is available in dual CPU controller and
Cross-Connect Backplane 72 Mbps power supply options, making it an excellent fit for
Capacity critical applications. The chassis does not contain a fan
and has no need for fan cooling.
* Future Option
The Loop-AM3440-D supports local control and
diagnostics by using an external 2-line, 40-character
LCD display and keypads, or by using a VT-100
terminal connected to the console port and USB
console port in CCB (CCPA only have USB console
port). The Loop-AM3440 also supports Ethernet,
Telnet, and SNMP management so it can be controlled
and diagnosed from remote locations. An in-band
management channel with GUI is available.
4
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
= Supported
= Not Supported
* = Future Option
D = Discontinued
Controller and Function
Controller
CCB CCPA
Function
LCDNote
DB9 console Note
Micro USB console
iXC tool *
Note: Loop-ACC-CAB-HDB15M-25-DB09F-G is included for Console/LCD Interface connection.
5
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
Ordering Information
To specify options, choose from the list below:
Note: RoHS compliant units are identified by the letter G appearing immediately at the end of ordering code.
◼ Where OPT is used to select the controller modules. MUST select one from the below list.
2GEa Packet controller module, support ⚫ Work with AM3440-A-CHPAa,
cross-connect function, 2 x Combo GbE AM3440-C-CHPCa and
(SFP/RJ45) interfaces for TDMoE uplink, one AM3440-D-CHPDa chassis.
DB9 console port, one Micro USB console port
and one RJ45 SNMP port.
Supports SAToP (T1 SAToP*), CESoPSN,
and MEF-8
Up to 64 Pseudowires
Supports SyncE
DCSa Common controller module, support ⚫ Work with AM3440-A-CHPAa,
cross-connect function, one DB9 console port, AM3440-C-CHPCa and
one Micro USB console port and one RJ45 AM3440-D-CHPDa chassis.
SNMP port.
6
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
◼ Where WEB is used to identify if the controller is featured with web GUI configuration.
The plug-in modules can be configured on the web GUI includes:
Controller
AM3440-CCPB-DCSa AM3440-CCPB-2GEa
Card/Interface
Mini Plug-in Module
CLKa
ABRA
3RS232a
ECA
◼ Where mgmt is used to select the following functions. Please replace mgmt with your selection, or leave it blank for
nothing.
mgmt= Description Note
Used with Loop-LCT Graphical Configuration Software
LCT Loop-AM3440-LCT activation license
for TDM application.
Used with Loop-iXC3440 cross-connect mapping tool
iXC Loop-AM3440-iXC activation license
for management (Controller CCB supported).
If LCT is required in the future, it can be activated by an
[blank] No configuration tool for management
activation license.
Loop-iXC3440 software covers most of AM3440 plug-in cards. Below is the list of cards currently supported by
Loop-iXC3440.
Mini Plug-in Module Description Note
E1 1-channel E1 plug-in card
T1 1-channel T1 plug-in card
sDTE 1-channel DTE plug-in card
MQE1 Mini Quad E1plug-in card
MQT1 Mini Quad T1plug-in card
AFR-E1 E1 ATM/ Frame Relay Interface Card
AFR-T1 T1 ATM/ Frame Relay Interface Card
RT 2-LAN ports/32 WAN port Router/Bridge plug-in card
RTA 2-LAN ports/64 WAN port Router/Bridge plug-in card
FOM Mini Fiber Optical plug-in card
TS 3-channel Terminal Server plug-in card
Q2EM Quad 2 wire E&M voice plug-in card
Q4EM Quad 4 wire E&M voice plug-in card
QFXO Quad FXO voice plug-in card
QFXS Quad FXS voice plug-in card
1OCUDP 1-channel OCU-DP plug-in card
ECA Echo Cancellation plug-in card
ABRA Analog Bridge plug-in card
M1C37 Mini 1-channel C37.94 plug-in card
*Future Option
7
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
8
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
Quad FXSA with GS plug-in card the table below for detail
Loop-AM3440-SQFXSA-GS-x-pt-G information.
Quad FXSA with GS and MP 16 KHz voice
Loop-AM3440-SQFXSA-GM-x-pt-G plug-in card Work with controller firmware
v8.38.01 and up for software
programmable signaling bits.
Loop-AM3440-SQMAGA-G* Quad channel magneto plug-in card
Data Processing
Loop-AM3440-SECA-G Echo canceller card
Loop-AM3440-SABRA-G Analog Bridge Card for AM3440-D
Packet Access
Loop-AM3440-SRTA-G 2-LAN ports/64 WAN port router/bridge
plug-in card
Teleprotection Access
Loop-AM3440-SM1C37-LSFOM-G 1- channel C37.94 plug-in mini card For LSFOM option, please refer to
the table below for detail
information
Clock and Alarm
Loop-AM3440-SCLKa-G CLKa Mini Slot plug-in card.
Applicable to AM3440-D-CHPDa
- Clock in x2, clock out x1
and AM3440-E-CHEB*.
- Alarm in x1, Alarm out x2
Loop-AM3440-SCLKb-G* CLKb Mini Slot plug-in card.
- Fuse ALM x1 Applicable to AM3440-D-CHPDa
- Critical ALM x1, MJR ALM x1, MIN ALM x1 and AM3440-E-CHEB*.
- Clock in x2, clock out x2
19”/23” ear mounts A pair of 19”/23” ear mounts is supplied as part of standard package.
Note: For other sizes, please contact your nearest Loop sales representative.
User’s Manual
Loop-AM3440-CCPB-UMG User’s Manual (optional, paper copy). For AM3440-CCPB-2GEa
A CD version of the manual is already included as controller
standard equipment.
Loop-AM3440-CCPB-UMD User’s Manual (optional, paper copy). For AM3440-CCPB-DCSa
A CD version of the manual is already included as controller
standard equipment.
Loop-AM3440-UMD User’s Manual (paper, hard copy-optional). A CD For AM3440-D CCB controller
version of the manual is already included as standard
equipment.
Loop-AM3440-UMP User’s Manual (optional, paper copy). For AM3440-D CCPA controller
9
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
10
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
Note: For other special optical modules, please contact your nearest Loop sales representative.
◼ Where m is used to select QEM card signaling side (must select one):
m= Description Notes
B B (carrier side) connects to A side.
A A (exchange side) connects to B side. A side M lead to B side M lead, A
side E lead to B side E lead.
◼ Where n is used to select QEM card signaling type (must select one):
n= Description Notes
O For voice transmission only. Circuit Type doesn’t matter.
1 Type I (Original) E&M Signaling Circuit M lead provides discharge for
the A side.
2 Type II Circuit. This design attempts to reduce ground noise by adding two Reduced ground noise.
leads: SB (Signal to Battery) and SG (Signal to Ground) Ground current is eliminated at
the cost of two more wires per
circuit.
Type III Circuit. The SG lead serves as a discharge for the M lead. Type III is rare because ground
3 Reduces delay caused by combination of (a) low current electronic currents on the E return would
detectors, and (b) long runs of the E and M leads. cause noise
Type IV Circuit. Based on the Type 2 circuit. This E&M circuit provides
4
symmetry.
Type V Circuit. For applications where ground noise is not an issue.
5
Based on the Type 2 circuit.
11
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
For QFXSA:
◼ Where pt is used to select the power :
pt= Description Note
PWR For AM3440-D-CHPDa chassis with ±48Vdc (SDPB) and AC (SAPB) power For CHPDa only
modules
1*8
1*8 ST
ZRATT Z R 2M A 820nm T 2km T Separate
Multi-mode connector transceiver
& receiver
1*9 ST
QRATT Q R 2M A 850nm T 2km T
Multi-mode connector
1x9
ST
*NFB3T N Single F 125 M B 1310nm 3 30km T
connector
mode
1*9
1x9 ST
*QFBTT Q F 125 M B 1310nm T 2km T
Multi-mode connector
1x9
SC
*NHC2S N Single H 155 M C 1550nm 2 20km S
connector
mode
* For the orders of the listed optical modules, please contact your Loop sales representative.
Examples:
Loop-AM3440-D-CHD, Loop-AM3440-CCB, Loop-AM3440-SDB, Loop-AM3440-D-SM4E75,
Loop-AM3440-D-SFOM:
For AM3440-D type chassis with a CPU card, a single -48 Vdc power module, a Mini Quad E1 interface with 75
ohm and a Mini Fiber Optical plug-in card.
12
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
AM3440-CCPA Controller on-board Combo Gigabit Ethernet (GbE) Interface for TDMoE Services
Number of Ports 2
Speed 10/100/1000M bps
Connector RJ45 for twisted pair GbE, LC for optical GbE, auto detection
Ethernet Function
Basic Features MDI/MDIX for 10/100/1000M BaseT auto-sensing
Ping function contained ARP
Pseudowire
Concurrent PW Up to 64
Encapsulation Format SAToP(CCPA T1 SAToP*), CESoPSN, MEF-8 (CESoETH)
QoS User configurable 802.1p CoS, ToS in out-going IP frame
Clock Source Internal, Line Interface, External (E1/T1/2048 KHz), Adaptive Clock Recovery for Pseudowires,
SyncE
Alarm Relay Max. Current: 1A for 24VDC, 0.625A for 48VDC
Fuse alarm, performance alarm
Management
Console Micro USB Connector
User Interface: Menu driven VT-100
Ethernet 2 Combo GE port, Connector: RJ45 & SFP
SNMPv1/v3, Telnet/SSH, support Radius client function
Inband Management Inband 64 Kbps, support HDLC/PPP
System Configuration Parameters Active Configuration, Stored Configuration, and Default Configuration (Stored in
Non-volatile Memory)
Configuration Upload/Download through TFTP/SFTP
Performance Monitor
Performance Registers Last 24 hours performance in 15 minute intervals and last 7 days in 24 hour summaries
Separate Registers Network, user, and remote site
Performance Reports Reports include E1 Bursty Errored Second, Severe Errored Second, Degraded Minutes. Also
available in Statistics (%)
Alarm Queue To record the latest alarm type, location, date and time
Threshold Bursty Seconds, Severely Errored Second, Degraded Minutes
Diagnostics
Loopback E1/T1 interface (Line Loopback, Payload Loopback, Local Loopback), DTE Loopback
(DTE-to-DTE, DTE to Line)
Test Pattern For Controller: 220-1, 215-1, 211-1, 29-1, and 4-byte user define pattern
Front Panel
Controller LED Indicators Power, ACTIVE, ALARM
AM3440-CCB Controller
Clock Source Internal, Line Interface, External (E1/T1/2048 KHz), Adaptive Clock Recovery for Pseudowires
(with TDMoEA module), SyncE
Alarm Relay Max. Current: 1A for 24VDC, 0.625A for 48VDC
Fuse alarm, performance alarm
Management
Console Electrical: RS232; Connector: HB15, female (with HB15-to-DB9 adaptor)
Micro USB
User Interface: Menu driven VT-100
Ethernet 1 Combo GE port, Connector: RJ45 & SFP
SNMPv1/v3, Telnet/SSH
Inband Management Inband 64 Kbps, support HDLC/PPP
System Configuration Parameters Active Configuration, Stored Configuration, and Default Configuration (Stored in
Non-volatile Memory)
Configuration Upload/Download through TFTP/SFTP
Performance Monitor
Performance Registers Last 24 hours performance in 15 minute intervals and last 7 days in 24 hour summaries
Separate Registers Network, user, and remote site
Performance Reports Reports include E1 Bursty Errored Second, Severe Errored Second, Degraded Minutes. Also
available in Statistics (%)
Alarm Queue To record the latest alarm type, location, date and time
Threshold Bursty Seconds, Severely Errored Second, Degraded Minutes
13
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
Diagnostics
Loopback E1/T1 interface (Line Loopback, Payload Loopback, Local Loopback), DTE Loopback
(DTE-to-DTE, DTE to Line)
Test Pattern For Controller: 220-1, 215-1, 211-1, 29-1, and 4-byte user define pattern
Front Panel
Controller LED Indicators Power, ACTIVE, ALARM
A, B, C, D slots: Multi-Color LED indication
AM3440-CCPB-2GEa Controller
Number of Ports 2
Speed 10/100/1000M bps
Connector RJ45 for twisted pair GbE, LC for optical GbE, auto detection
Ethernet Function
Basic Features MDI/MDIX for 10/100/1000M BaseT auto-sensing
Ping function contained ARP
Pseudowire
Concurrent PW Up to 64
Encapsulation Format SAToP (CCPB T1 SAToP*), CESoPSN, MEF-8 (CESoETH)
QoS User configurable 802.1p CoS, ToS in out-going IP frame
Clock Source Internal, Line Interface, External (E1/T1/2048 KHz from CLKa/CLKb* module), Adaptive Clock
Recovery for Pseudowires, SyncE
Management
Console Electrical: RS232 / USB
Connector: DB9S (DCE), female / Micro USB
User Interface: Menu driven VT-100
Ethernet 2 Combo GE port, Connector: RJ45 & SFP
SNMPv1/v3, Telnet/SSH, support Radius client function
Web GUI support
Inband Management Inband 64 Kbps, support HDLC/PPP
System Configuration Parameters Active Configuration, Stored Configuration, and Default Configuration (Stored in
Non-volatile Memory)
Configuration Upload/Download through TFTP/SFTP
Performance Monitor
Performance Registers Last 24 hours performance in 15 minute intervals and last 7 days in 24 hour summaries
Separate Registers Network, user, and remote site
Performance Reports Reports include E1 Bursty Errored Second, Severe Errored Second, Degraded Minutes. Also
available in Statistics (%)
Alarm Queue To record the latest alarm type, location, date and time
Threshold Bursty Seconds, Severely Errored Second, Degraded Minutes
Diagnostics
Loopback E1/T1 interface (Line Loopback, Payload Loopback, Local Loopback), DTE Loopback
(DTE-to-DTE, DTE to Line)
Test Pattern For Controller: 220-1, 215-1, 211-1, 29-1, and 4-byte user define pattern
Front Panel
Controller LED Indicators Power, ACTIVE, ALARM
14
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
AM3440-CCPB-DCSa Controller
Clock Source Internal, Line Interface, External (E1/T1/2048 KHz from CLKa/CLKb* module)
Alarm Relay Max. Current: 1A for 24VDC, 0.625A for 48VDC
Fuse alarm, performance alarm from CLKa/CLKb* module
Management
Console Electrical: RS232 / USB
Connector: DB9S (DCE), female / Micro USB
User Interface: Menu driven VT-100
Ethernet RJ45 port
SNMPv1/v3, Telnet/SSH
Web GUI support
Inband Management Inband 64 Kbps, support HDLC/PPP
System Configuration Parameters Active Configuration, Stored Configuration, and Default Configuration (Stored in
Non-volatile Memory)
Configuration Upload/Download through TFTP/SFTP
Performance Monitor
Performance Registers Last 24 hours performance in 15 minute intervals and last 7 days in 24 hour summaries
Separate Registers Network, user, and remote site
Performance Reports Reports include E1 Bursty Errored Second, Severe Errored Second, Degraded Minutes. Also
available in Statistics (%)
Alarm Queue To record the latest alarm type, location, date and time
Threshold Bursty Seconds, Severely Errored Second, Degraded Minutes
Diagnostics
Loopback E1/T1 interface (Line Loopback, Payload Loopback, Local Loopback), DTE Loopback
(DTE-to-DTE, DTE to Line)
Test Pattern For Controller: 220-1, 215-1, 211-1, 29-1, and 4-byte user define pattern
Front Panel
Controller LED Indicators Power, ACTIVE, ALARM
Physical /Electrical
Model AM3440-D-CHPDa AM3440-D-CHD
Dimensions 442 x 88.5 x 223.9 mm (WHD) 438 x88 x 224 mm (WHD)
Power Single/ Dual -48 Vdc: -36 to -75 Vdc, 100 Single/ Dual -48 Vdc: -36 to -75 Vdc, 100
Watts max. Watts max.
Single AC: 100 to 240 Vac, 50/60 Hz Single AC: 100 to 240 Vac, 50/60 Hz
Temperature Operating -20 to 65°C -20 to 65°C
Storage -30 to 70°C -30 to 70°C
Weight Net Weight 3.5Kg (7.72lbs) 3.5Kg (7.72lbs)
Max. Weight 7.5Kg (16.53lbs) 7.0Kg (15.43lbs)
Humidity 0-95%RH (non-condensing) 0-95%RH (non-condensing)
Mounting Desk-top stackable, 19” /23” rack mountable Desk-top stackable, 19” /23” rack mountable
Power Consumption Max 45 Watts Max 45 Watts
Certification
EN55032 Class A, EN55035, FCC Part 15 Class A, EN62368-1, UL62368-1
Compliance
ITU G.703, G.704, G.706, G.732, G.736, G.823, G.826, G.711, G.712, G.775, O.151, Q552, Q553, V.11, V.28, V.54
Transportation Cards
Network Line Interface - T1
Line Rate 1.544 Mbps 50 bps Output Signal DSX1
Line Code AMI or B8ZS Framing D4/ESF (selectable)
Input Signal ABAM cable length up to 655 feet Connector RJ48C
15
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
16
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
17
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
Voice Card(QMAGA)
Connector RJ11 x 4
Power 110-220 Vac or ±48 Vdc
18
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
Signaling
Minimum Detectable Ringing Voltage 16 Vrms
Crank Detectable Across L1 & L2 Mode (Tip and Ring), L1 & GND Mode(Tip and GND) per port software
programmable
Crank Detected time Valid crank: more than 250 ms
Invalid crank: less than 160 ms
Ringing Generation Voltage: 76 Vrms (sine wave)
Frequency: 25Hz
Ring duration Software configurable options:
1. PLAR OFF (Continuous Mode)
Ring duration depends on cranking time
3. PLAR ON
When FXS phone off-hooked, the ring duration of the far-end magneto
phone could be 0.7, 1.0, 1.5 or 2.0 sec
Ringing Send Across L1 & L2 Mode (Tip and Ring), L1 & GND Mode(Tip and GND)
Signaling Turn Magneto Phone crank (Ringing across Tip and Ring or Tip and Ground)
Signaling Bit A,B,C,D Programmable
Signaling is carried transparently by the digitizing process.
Use Magneto card default setting for communications between magneto telephones
Use Magneto card PLAR mode setting for communications between a magneto telephone and a regular telephone
Data Processing
Analog Bridge Card (ABRA)
Group Up to 8 groups per card, 16 members per group
Analog Bridge Mode Master/Slave Architecture
Downstream : 2 to many
Upstream : many to 2
Voice Conference Mode with Any-to-any conference bridge
CAS Signalling
Up to 16 members in one conference group
Silence detection/suppression
RS232 Data Bridge Mode Master/Slave Architecture
Downstream : 2 to many (up to 14 Slave units)
Upstream : many to 2
Voice Protection Mode One Master to two Slaves for 1+1 protection
Analog signals only
42 protection groups
OCU-DP Data Bridge Mode Master/Slave Architecture
(MJU Mode) Downstream: 1 to many (up to 14 Slave units)
Upstream: many to 1
PCM encoder/decoder Compatible with ITU-T G.711 A-law/Mu-law coding.
LED Indicator Multi-color indication
1:1Card ProtectionNOTE Dual-card redundancy
19
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
Packet Access
Router-A Interface
Number of Ports 2 LAN ports, Max. 64 WAN ports, Each WAN port has data rate n x 64K bps, 1 n 32 ( 4Mbps for
total of all 64 WAN ports
Physical Interface 10/100 BaseT x 2
Connector RJ45
Routing Protocol RIP-I, RIP-II, OSPF, Static
Supporting Protocols PPP (IPCP/BCP), MLPPP, HDLC, Frame Relay, and Cisco compatible HDLC, NAT/NAPT, DHCP
Diagnostic Ping, Trace route
QoS Rate limit
Teleprotection Access
Mini C37.94 Card
820nm
Ordering Code Mode Data Rate (Mb/s)
ZRATT 1*8 Multi-Mode 2.048Mbps
Wavelength (nm) Distance (km) Connector
820 2 ST
850nm
Ordering Code Mode Data Rate (Mb/s)
QRATT 1*9 Multi-Mode 2.048Mbps
Wavelength (nm) Distance (km) Connector
850 2 ST
1310nm
Ordering Code Mode Data Rate (Mb/s)
NFB3T 1*9 Single-Mode 125Mbps
Wavelength (nm) Distance (km) Connector
1310 30 ST
1310nm
Ordering Code Mode Data Rate (Mb/s)
20
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
1550nm
Ordering Code Mode Data Rate (Mb/s)
NHC2S 1*9 Snigle-Mode 155Mbps
Wavelength (nm) Distance (km) Connector
1550 20 SC
Alarm Output (Fuse, SYS_ALM) Max. Current: 1A for 24VDC, 0.625A for 48VDC
21
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
Application Illustration
E1/T1 E1/T1
E1/T1 NETWORK
SNMP
Manager
E1/T1
LAN
Mini Slot Plug-in Cards
1-channel T1 interface card
1-channel E1 plug-in card
Mini Quad E1 plug-in card
Mini Quad T1 plug-in card
1-channel C37.94 mini plug-in card
2-LAN ports/64 WAN port Router/bridge plug-in card
Fiber Optical Interface
1 - channel DTE
(1X.21, 1V.35, 1RS232)
3 - channel RS232a
22
Loop-AM3440-D Access DCS-MUX Multi-Services Cross Connect
GbE E1/T1
AM3440-D
23