Professional Documents
Culture Documents
FAÇ A D E
H A L F E N N AT U R A L S TO N E S U P P O R T S Y S T E M S
Introduction
Natural stone façades are usually HALFEN has numerous years of We offer customers a comprehensive
designed and constructed as ventilated experience and competence in façade package of planning and engineering
curtain façades. HALFEN Natural stone construction, as our highly experienced services to reliably plan and realise
fixing systems are the optimal solution project engineers have proven time and their natural stone façades as reliably
for realising this type of ventilated time again in various major projects and as efficiently as possible.
curtain façade. with which we have been entrusted.
Quality assurance and safety are of pendent and neutral, safety and quality capacities, and the complete documen-
ever increasing importance in the testing organisation. The quality cer- tation of the load-bearing anchors.
construction of buildings. The HALFEN tificate is the first independent quality It is a comprehensive and independent
Body anchors and HALFEN Grout-in certificate awarded for the production quality assurance covering all
anchors have been quality tested and the construction of façade systems characteristics of the product.
and certified by the Nuremberg LGA of this type.
Landesgewerbeanstalt (Nuremberg
based independent certification The precondition for a quality-seal
agency). award are comprehensive tests by the
The LGA is part of the “TÜV Rheinland LGA. This includes assessment of the 71712 71713
Group”, Germany’s renowned, inde- manufacturing process, the static load www.lga.info www.lga.info
Steel structures
A4: Steel, corrosion resistance class (CRC) III acc. to EN 1993-1-4: 2015-10, Table A.3 (group 1.4362, 1.4571…)
A2: Steel, corrosion resistance class (CRC) II acc. to EN 1993-1-4: 2015-10, Table A.3 (group 1.4311, 1.4307…)
Introduction
Accessories
Design fundamentals
- Design fundamentals 26
- Tender specifications 27
To meet the requirements for calculat- The -value defines the effect of a of the building caused by the HALFEN
ing thermal bridges, HALFEN provides three-dimensional point thermal bridge Natural stone support system.
the thermal bridge coefficient for caused by the fixing of the anchor and The values are dependent on both the
their body anchors, HALFEN SUK penetration of the thermal insulation. thickness and thermal conductivity of
Sub-structures elements and grout-in Using these values the planner can the insulation, and the material of the
anchors. exactly calculate the effect on the ther- main structure (concrete/brickwork).
mal transfer coefficients U [W/m²×K]
Thermal bridge coefficient [W/K] for ins = 0.035 (thermal conductivity of the insulation) for body anchors in concrete
Insulation thickness dins [cm]
4 6 8 10 12 14 16 18 20 22 24 26 28 30
DT-4xx 0.025 0.020 0.017 0.014 0.012 0.011 0.010 0.009 0.008 0.008 0.007 0.007 0.006 0.006
DT-13xx 0.045 0.037 0.031 0.026 0.023 0.020 0.018 0.017 0.015 0.014 0.013 0.012 0.011 0.011
DH-17xx 0.011 0.009 0.007 0.006 0.005 0.005 0.004 0.004 0.004 0.003 0.003 0.003 0.003 0.002
Thermal bridge coefficient χ [W/K] for λins = 0.035 (thermal conductivity of the insulation) for grout-in anchors in concrete
4 6 8 10 12 14 16 18 20 22 24 26 28 30
UHA - 5 0.003 0.003 0.002 0.002 0.002 0.002 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001
UHA - 7 0.007 0.005 0.005 0.004 0.003 0.003 0.003 0.002 0.002 0.002 0.002 0.002 0.002 0.002
UMA - 10 0.007 0.006 0.005 0.004 0.004 0.003 0.003 0.003 0.002 0.002 0.002 0.002 0.002 0.002
UMA - 12 0.009 0.007 0.006 0.005 0.004 0.004 0.003 0.003 0.003 0.003 0.002 0.002 0.002 0.002
UMA - 16 0.012 0.010 0.008 0.007 0.006 0.005 0.005 0.004 0.004 0.004 0.003 0.003 0.003 0.003
UMA - 18 0.018 0.014 0.012 0.010 0.009 0.008 0.007 0.006 0.006 0.005 0.005 0.005 0.004 0.004
UMA - 22 0.022 0.018 0.015 0.013 0.011 0.010 0.009 0.008 0.007 0.007 0.006 0.006 0.006 0.005
UMA - 25 0.026 0.021 0.017 0.015 0.013 0.011 0.010 0.009 0.009 0.008 0.007 0.007 0.006 0.006
UMA - 28 0.035 0.029 0.024 0.020 0.018 0.016 0.014 0.013 0.012 0.011 0.010 0.009 0.009 0.008
UMA - 33 0.046 0.038 0.031 0.027 0.023 0.021 0.019 0.017 0.015 0.014 0.013 0.012 0.011 0.011
Technical Support
Thermal bridge coefficient [W/K] for ins = 0.035 (thermal conductivity of the insulation) for grout-in anchors in perforated brick
4 6 8 10 12 14 16 18 20 22 24 26 28 30
UHA - 5 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001
UHA - 7 0.003 0.003 0.003 0.003 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.001 0.001 0.001
UMA - 10 0.003 0.003 0.003 0.003 0.003 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.001 0.001
UMA - 12 0.004 0.004 0.004 0.003 0.003 0.003 0.003 0.002 0.002 0.002 0.002 0.002 0.002 0.002
UMA - 16 0.005 0.005 0.005 0.005 0.004 0.004 0.004 0.003 0.003 0.003 0.003 0.003 0.003 0.002
UMA - 18 0.008 0.008 0.007 0.007 0.006 0.006 0.005 0.005 0.005 0.004 0.004 0.004 0.004 0.004
UMA - 22 0.010 0.010 0.009 0.009 0.008 0.007 0.007 0.006 0.006 0.006 0.005 0.005 0.005 0.004
UMA - 25 0.011 0.011 0.011 0.010 0.009 0.008 0.008 0.007 0.007 0.006 0.006 0.006 0.005 0.005
UMA - 28 0.016 0.016 0.015 0.014 0.013 0.012 0.011 0.010 0.009 0.009 0.008 0.008 0.007 0.007
UMA - 33 0.021 0.021 0.019 0.018 0.016 0.015 0.014 0.013 0.012 0.012 0.011 0.010 0.010 0.009
Channel support systems are the Stainless steel has a fourteen times This has a positive effect on heat trans-
optimal solution for reducing thermal lower thermal conductivity than mission through the anchor element.
bridges. HALFEN SUK and UKB are aluminium. The higher strength of It is also possible to place a thermal
anchored to the building at only a few stainless steel compared to aluminium separator between the anchor and the
fixing points. All elements anchored also makes it possible to design ele- load-bearing structure.
to the load-bearing structure are manu- ments with a smaller cross-section. This feature reduces thermal bridging
factured from stainless steel. and therefore heat loss.
Thermal bridge coefficient [W/K] for ins = 0.035 (thermal conductivity of the insulation) for SUK individual parts anchored in concrete
SUK-A 4 6 8 10 12 14 16 18 20 22 24 26 28 30
SUK - F 0.0217 0.0164 0.0131 0.0109 0.0094 0.0082 0.0073 0.0065 0.0059 0.0054 0.0050 0.0047 0.0043 0.0041
SUK - A 0.0360 0.0271 0.0217 0.0181 0.0155 0.0135 0.0120 0.0108 0.0098 0.0090 0.0083 0.0077 0.0072 0.0067
Custom solutions
References
More references can be found on our website www.halfen.com.
Or simply scan the QR Code.
Features Advantages
HALFEN Body anchors used together • three-dimensional adjustability
with HALFEN HTA/HZA Cast-in chan-
• flexible fixing methods
nels guarantee maximum adjustability
to compensate for on-site tolerances. • vertical anchor adjustment
(using a serrated plate or wedge plate)
HALFEN Body anchors can also be • horizontal anchor adjustment
fixed to a suitable load-bearing (using a spade bolt)
structure using HALFEN Anchor bolt • anchors are adjustable by 15°
systems. HALFEN Body anchors cover • TÜV/LGA quality tested
a wide range of applications for fixing
• can be subjected to load immediately
natural stone.
after installation → fast construction
• natural stone panel with pin support
b
• quantifiable thermal bridge coefficient
[W/K]
max 15°
71712
r r max r = 20 mm www.lga.info
Features Advantages
HALFEN Grout-in anchors are a tra- • type tested
ditional method of anchoring natural
• one type of anchor for both
stone façades. The tubular section of
horizontal and vertical joint fixing
the UMA / UHA anchors makes them
suitable for both horizontal and vertical • TÜV / LGA tested quality
joints in natural stone panel façades. • anchored in the drillhole using
cement based mortar
Adjustment is by casting the anchors • can be used for large stand-off
in a sufficiently large, pre-drilled installations and high loads
mortar filled hole. • suitable for seismic loads in
earthquake regions
The joints between the natural stone
• natural stone panel with pin bearing
slabs must be supported with shims
until the mortar has hardened and • quantifiable thermal bridge
final load-bearing capacity has been coefficient [W/K]
reached.
71713
www.lga.info
Features Advantages
The HALFEN SUK Stainless steel • height of suspended channel system
support system is ideal both for new freely adjustable
building and modernization projects. • horizontal adjustment
Its unique characteristic is the capacity (using a spade bolt)
to span a non-load-bearing substrate.
• fast assembly and therefore
It can be used for installation of large, faster construction times
varying stand-off distances from the • proven in numerous projects
load-bearing structure. A4/AISI 316 • spans non-load-bearing sub structures
grade stainless steel material guarantees
a high resistance against corrosion. • panel/slab support with pin bearing
• suitable for custom designed
Fewer required fixing points reduce constructions
installation costs for the whole support • high corrosion resistance
system. Fewer fixing points also reduce
• high load bearing capacity
heat-loss, resulting in very good thermal
properties when using the SUK System.
Features Advantages
Light weight and easy to use support • suspended channel system with
system: Support and restraint brackets multiple adjustment possibilities
in A4/AISI 316 stainless steel, vertical • spans non-load-bearing sub structures
channels in aluminium.
• stone slabs are supported with pins
The HALFEN Body anchors product The stand-off distance of the natural The anchor pins are available with full
range provides solutions for all instal- stone slab is adjusted using a spade pins (∅ 5 × 70 mm), design 1, and with
lation requirements for natural stone bolt. It is also possible to swivel the half-pins (∅ 5 × 35 mm), design 2.
façades. anchor by up to 15°. HALFEN also provides various special
The anchors can be subjected to load custom designs, for example design 3
Body anchors are three-dimensionaly immediately after installation to and 4.
adjustable and are available for various HALFEN Cast-in channels or to a suit- Illustrations of available designs:
stand-off sizes and load ranges. able load-bearing structure. Pins secure → page 12
Vertical adjustment is with a serrated the natural stone slabs to the anchors.
or wedge plate.
71712
www.lga.info
Nominal dimensions
Material specifications → page 2
HALFEN DH Body anchor • restraint anchor only, not suitable for carrying dead load of element
• stand-off distances between 60 and 320 mm
• max. permissible load 850 N to 1300 N
• material ; stainless steel A4 or A2
Nominal dimensions
Material specifications → page 2
HGA-F
See page 23. More informationen about
GE-HB HALFEN Scaffold anchors can be found in
Technical Product Information "HALFEN
Scaffold anchors". Complimentary download
at: www.halfen.com/brochures/Catalogues/
accessories
GE-VB
x ± 10
h
c d
Fh
i Note
z L
Please order fixings separately
(→ page 20). Select by R Z, ∅ and l
HALFEN BA Body anchors are designed The BA Body anchor is fixed according slot and a serrated plate for easy
for 60 to 120 mm stand-off distances to the installation instructions, either height adjustment.
with a maximum load of 1300 N. in the horizontal or vertical joint in As with all body anchors the distance
load-bearing substrate to HALFEN to the load-bearing substrate is adjust-
The anchors consist of a sturdy base Cast-in channels or HALFEN Anchor ed by turning the spade bolt in or out.
element, a serrated plate and a bolt systems. The anchor bracket can be adjusted
spade bolt. The bracket has a vertical 8.5 × 28 mm laterally by swivelling the whole unit.
Body anchors BA
Perm. load Stand-off distance Support body Spade bolt Connection
Type FV k min k max k x L h e d c l z ∅
[N] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
606 900 60 52 70 50 29 95 10 12 4 58 15 8.5 × 28
608 600 80 65 90 55 36 95 10 12 4 71 18 8.5 × 28
610 600 100 80 120 55 56 95 10 12 4 85 18 8.5 × 28
612 600 120 100 140 55 76 95 10 12 4 85 18 8.5 × 28
1308 1,300 80 70 100 65 47 110 10 16 5 74 18 8.5 × 28
1310 1,300 100 90 120 65 47 110 10 16 5 94 18 8.5 × 28
1312 1,300 120 105 135 65 47 110 10 16 5 106 18 8.5 × 28
perm. Fh = actual FV
x ± 10
h
c d
Fh
i Note L
z
Please order fixings separately l
(→ page 20). Select by R Z, ∅ and k
type of material in which anchored.
HALFEN DT Body anchors are suitable is supplied ready for installation. but is easily adaptable for right to left
for large stand-off distances of 140 mm The stand-off distance is adjusted installation. After aligning each
up to 300 mm and high loads up to using the spade bolt. The anchor can natural stone panel the clamping bolts
1300 N. The pre-assembled anchor be pivoted for lateral adjustment. are tightened with a torque of 5 Nm.
consisting of the bracket, the adjust- The clamping bolt is pre-assembled at
able wedge plate and a clamping bolt the factory for left to right installation
Ordering example b
DT - 414 - 1 - A4
Anchor type
Version
max 15°
Design*
Material
* see page 12
r r max r = 20 mm
Body anchors DT
Perm. load Stand-off distance [mm] Support body [mm] Spade bolt [mm] Connection [mm]
Type
FV [N] k min k max k x L h e d c l z ∅
414 400 140 120 170 50 95 92 30 12 4 105 21 9
416 400 160 140 190 55 115 97 30 12 4 105 21 9
418 400 180 160 210 60 135 102 30 12 4 105 21 9
420 400 200 180 230 65 155 107 30 12 4 105 21 9
422 400 220 200 250 70 175 112 30 12 4 105 21 9
424 400 240 220 270 75 195 117 30 12 4 105 21 9
426 400 260 240 290 80 215 122 30 12 4 105 21 9
428 400 280 260 310 85 235 127 30 12 4 105 21 9
430 400 300 280 330 90 255 132 30 12 4 105 21 9
1314 1,300 140 120 170 80 90 130 36 16 5 115 21 11
1316 1,300 160 140 190 85 110 135 36 16 5 115 21 11
1318 1,300 180 160 210 95 130 145 36 16 5 115 21 11
1320 1,300 200 180 230 80 150 130 36 16 5 115 21 13
1322 1,300 220 200 250 90 170 140 41 16 5 115 21 13
1324 1,300 240 220 270 95 190 145 41 16 5 115 21 13
1326 1,300 260 240 290 100 210 150 41 16 5 115 21 13
1328 1,300 280 260 310 105 230 155 41 16 5 115 21 13
1330 1,300 300 280 330 110 250 160 41 16 5 115 21 13
perm. Fh = actual FV
x ±10
h
i Rz
Note
Please order fixings separately ∅
(→ page 20). Select by R Z, ∅ and L
type of material in which anchored.
HALFEN DH Body anchors are The anchor is mainly used at slab edges Vertical adjustment is with the 9 × 30
3-dimensionally adjustable. They and corners or for parapet elements. mm slot. This anchor is also laterally
are designed to carry only horizontal It is designed for stand-off installation adjustable by swivelling the whole unit.
tension or pressure loads. DH Body of 60 to 320 mm and horizontal loads The body anchor is delivered with an
anchors are used in combination with of up to 1,300 N. The stand-off distance additional counter nut, which addition-
HALFEN BA and DT Body anchors. from the main load-bearing structure is ally locks the spade bolt.
adjusted using the spade bolt.
Standard designs for BA, DT and DH: Special designs for BA, DT and DH (on request):
Body anchors DH
Type Stand-off distance [mm] Support body [mm] Spade bolt [mm] Connection [mm]
Perm. load
including
Fh [N] k min k max k x h L d c l z ∅
locking nut
1006 850 60 53 68 26 80 18 6 2 60 21 9 × 30
1008 850 80 73 88 26 80 18 6 2 80 21 9 × 30
1010 850 100 93 108 26 80 18 6 2 100 21 9 × 30
1712 1,300 120 105 134 25 80 32 8 3 112 27 9 × 30
1714 1,300 140 125 154 25 80 32 8 3 132 27 9 × 30
1716 1,300 160 145 174 25 80 32 8 3 152 27 9 × 30
1718 1,300 180 165 194 25 80 32 8 3 172 27 9 × 30
1720 1,300 200 185 214 25 80 32 8 3 192 27 9 × 30
1722 1,300 220 205 234 25 80 32 8 3 212 27 9 × 30
1724 1,300 240 225 254 25 80 32 8 3 232 27 9 × 30
1726 1,300 260 245 274 25 80 32 8 3 252 27 9 × 30
1728 1,300 280 265 294 25 80 32 8 3 272 27 9 × 30
1730 1,300 300 285 314 25 80 32 8 3 292 27 9 × 30
1732 1,300 320 305 334 25 80 32 8 3 312 27 9 × 30
Type tested*
tested* The round cross section of the Ordering example
HALFEN UMA Grout-in anchor makes UMA - 16 - 3 - 210
71713
www.lga.info
it especially suitable for grouting in Anchor type
brickwork (> M12/IIa) and in concrete Diameter d [mm]
(> C12/15). The anchor has the same Design
load-bearing capacity in horizontal and Anchor length [mm]
vertical joints. Depending on the anchor ∅
type, stand-off installations of up to
Material: 300 mm with maximum vertical loads
Stainless steel A4 or A2 → page 2
of 4300 N are possible. A sufficiently
Separate serviceability certificates for dimensioned drill hole, filled with LD
anchor bending are required. cement mortar, allows three-dimensional loose pin
adjustability of the anchor. The anchors with fixed collar
are type tested and are available in vari- for designs 1, 3 and 7.
Available UMA designs:
ous designs.
Type tested*
tested* HALFEN UHA Restraint anchors are mainly at edges and at corners for
used to support horizontal compression parapets. The anchor is type tested
71713
www.lga.info
and tension forces. and has the same advantages as the
The UHA Restraint anchor is used UMA Grout-in anchor. Loads of up
in combination with UMA Grout-in to 2500 N are possible. The anchor is
anchors. Restraint anchors are used available in three standard designs.
Material:
Stainless steel A4 or A2 → page 2
H A L F E N N AT U R A L S TO N E S U P P O R T S Y S T E M S
HALFEN Grout-in Anchors in Concrete
The standard HALFEN Support HALFEN Support structures are also The HALFEN SUK stainless steel
structure system consists of a series suitable for spanning non-load-bearing support structure is suitable for durable
of vertical channels between floors. constructions. constructions in harsh environments
Fixings are only required at compara- and for high loads.
tively large intervals. This reduces the Furthermore, using pre-install support The HALFEN UKB System channel
number of required connections to the construction systems permit fast and support structure is very easy to install
underlying main support structure. economical fixing of façade panels and and a cost effective alternative.
slabs.
The Advantages
• the building’s weatherproofing and Two main categories of support
insulation is penetrated less structures for different requirements For detailed information
i
• the number of thermal bridges is are available from HALFEN: about HALFEN Support
reduced. This helps to observe the structure systems please contact us.
applicable energy-saving regulations. • HALFEN SUK Stainless steel support → see page 28 for
In Germany: EnEV = German Energy- structures contact information
Saving Regulations • HALFEN UKB Aluminium or just scan the code.
support structures
Applications
mima – Middlesbrough Institute of Modern Art/England HALFEN SUK Channel support structure
The HALFEN SUK System is an adjust- The necessity for fewer anchor points
able suspended channel system with allows quick installation of the stainless
support and restraint anchors that can steel support structure and therefore
easily be adjusted to any height for faster façade element installation.
façade stand-off installations > 160 mm.
Material:
It is ideal for new constructions and Stainless steel A4
remodelling projects. The system is Material specifications → page 2
especially suited for natural stone
façades with large and varying
distances to the load-bearing wall.
SUK - HS - 1,6 - 1
Restraint anchor with 1 loose pin
SUK - DT - 1,2 - 2
Double support anchor
with 2 fixed half-pins
SUK - TSG - 0,8 - 1 - M12
SUK - TSG - 1,5 - 1 - M16
Support anchor with 1 loose pin
The HALFEN UKB System is a freely The support brackets are made of
adjustable aluminium and stainless stainless steel A4.
steel support structure with vertical They are either fastened to HALFEN
1
U-profiled support elements for use Cast-in channels or to the load-bearing
in the ventilation gap of natural stone main structure using HALFEN Anchor
façades. This type of construction bolts. Depending on environmental
reduces thermal bridges to a minimum. conditions, protection against surface
2
corrosion must be taken into account,
The type 606 HALFEN BA Body for example with barrier tape.
anchors are fixed to the front of the
5 vertical channels. Material:
The UKB Support structure allows for Aluminium (EN-A W6060)
4 stand-off installation between 130 stainless steel A4
and 320 mm and three-dimensional material specifications → page 2
adjustments of ± 20 mm.
3
References
Museum of Liverpool/England
Body anchor fixing with HALFEN Cast-in channels and HALFEN T-head bolts
l b
Designation Thread
[mm] [mm]
M8
HTA-CE 28/15 - A4 HS 28/15 - × 30 - A4 20
M 10
M 10
HTA-CE 38/17 - A4 HS 38/17 - × 30 - A4 29
M 12
ETA -07/0247
Fixing the HALFEN Body anchors with HALFEN HB-BZ Wedge anchor
ETA -07/0249
The soffit / jamb brackets and restraint The non DIN compliant pin and glue The support anchors are adjustable
angles significantly improve the connec- process can be omitted. The façade (up to ±5 mm); façade, soffit and jamb
tion between façade and soffit / jamb slabs can be installed quickly, simply panels can also be installed with open
elements, especially when using natural and efficiently in the precast factory joints. To prevent stresses the panels
stone. or on site. are fixed with support brackets and
restraint anchors.
LW-ALU
Soffit support anchor LW-ALU
Façade plate
d
d/2 d/2
Ø8
UMA Seal
Grout-in anchor
Drill hole
∅ 8 mm
A Façade plate
Support slab Pin
∅ 5 × 70 mm B
Ø11
Pillar cladding
HALFEN LW Jamb / recess bracket: dimensions
HALFEN LW -ALU Side length Angle height Dimension Dimension
Jamb / recess bracket [mm] [mm] A B
LW- 60/40-ALU 60 40 35 80
LW- 60/60-ALU 60 60 35 80
LW- 80/40-ALU 80 40 50 90
LW- 80/60 ALU 80 60 50 90 i Further details
LW- 90/40-ALU 90 40 50 90 Please contact our technical team for
LW- 90/60 ALU 90 60 50 90 inquiries concerning specific detailing.
LW-100/40-ALU 100 40 50 90 Contact information: see page 28.
LW-100/60-ALU 100 60 50 90
Dimensions
LW -1/-2 and
FV1
LW J-1/J-2, adjustable Pins, glued
LW-J 2
18 Recess cut with
3mm 3 mm angle grinder
10
50
Sleeve
Ø 5.1
5,1
Reveal panel Façade panel
5.1
Ø 5,1
LW-J 1
Recess cut with
Pins, glued 3mm 3 mm angle grinder
10
50
37
10
37
LW-2
Material:
Pins, glued
Stainless steel A4
Material specifications → page 2
Dimensions
HALFEN SOF Soffit anchor
X
T
M 10
Scaffolding used in the construction of the scaffolding and the distribution additional anchoring measures.
industry must be planned in accord- of the joints in the façade. To meet the ever-increasing demands
ance with DIN EN 12810 and DIN EN HALFEN manufactures the scaffold on thermal insulation HALFEN HGA-F
12811. These standards include type anchors and also specifies the maxi- Scaffold anchors can be installed with
specific requirements for initial scaf- mum working loads for each anchor a thermal separation strip between the
folding for building and also for façade both vertically and horizontally to the building and the anchor. The thermal
installations and maintenance work. façade to ensure the required reliability separation strips reduce the heat loss
To connect to the supporting structure in planning and application. caused by the scaffold anchors and im-
of the buildings, scaffolding anchors proves the heat transmission efficiency
are used which must be technically Loads from the scaffold are transferred of the building.
capable of securing the scaffolding to the HALFEN Scaffold anchors using
reliably through the thickness of the reusable straps or ringbolts. HALFEN
façade. This is the only safe method Scaffold anchors remain in the building
to install the insulation and façade after dismantling the scaffold and are
elements for the building from the concealed so not to disrupt the façade
scaffolding. appearance. This ensures that a scaf- HALFEN Scaffold anchors
The position, fixing method and fold can be re-erected later without for natural stone façades
load-bearing capacity of the scaffold
anchors must be taken into account
when planning the façade and included
in the building’s documentation. The
choice of anchors depends on the type
HALFEN GE-HB
of scaffolding selected, the anchor grid Scaffolding
anchors
HALFEN HGA-F
Scaffold anchor
HALFEN GE-VB
Scaffold anchor
HALFEN GE-HB
Scaffold anchor
Pipe scaffold system
Installation direction:
from left → right or i Note:
from right → left Natural stone slabs are
always from bottom → top generally fixed at four points.
Thermal insulation should be cut
▸ Ensure the façade is measured correctly out before drilling the fixing holes.
and tolerances have been considered.
▸ Erect any required scaffolding.
▸ Cut and remove a section of the thermal
insulation to drill the hole for the anchor
Important:
bolt. The insulation is replaced after
Tighten all countersink
anchor installation.
screws and anchor bolts using a
▸ Drill the dowel holes for the first and torque wrench adjusted to the
second row of slabs, ensure correct hole
correct torque!
Support diameter and minimum drill hole depth.
anchors ▸ Remove all dust from the hole.
Façade view
▸ Fix and align the lower row of body
anchors (support anchors) with approved Detail
anchor bolts i.e. HALFEN HB-BZ. Pin, fixing hole and joint
Note: Always use the supplied washer when dimensions [mm]
using HALFEN Bolts or HALFEN Dowels ≥8
to attach the HALFEN DH Body anchor to ≥ 1.5
the main load bearing structure. ≥ 1.5
Pin
▸ Replace the previously removed thermal
≥5
insulation.
▸ Fill the pin holes above the anchor with
A A
mortar. Fixing hole
≥ 25
▸ Place the first row of slabs onto the
support anchors. ≤ 10
▸ Fix and align the support anchors for
the second row of slabs with approved
≥2
Sleeve
▸ Make any fine adjustments to the
first row of slabs: allow at least a 2 mm
gap between the top edge of the lower
≥5
≥8
≥10
≥ 1.5
≥ 30
A
≥10
≥2 Pin
≥5 ≥ 25 ≤10 ≥ 25 ≥5 Section A-A
The planning of natural stone anchor b) Dimensions of natural stone d) Anchoring in concrete or masonry
fixings is based on the details shown width b structures
in figures a) to e). This allows fast and height h
accurate installation to ensure cost thickness d
effective fixing of natural stone panels.
Material g [kN/m3]
Panel weight:
FV = b [m] × h [m] × d [m] × g [kN/m3] d c i
Type BA 1308-D-A4
with
1308 = permitted load FV = 1300 N, with a stand-off installation k = 80 mm
D = design alternative ……
(1 = with loose pin and sliding sleeve, 2 = with press-fit half-pin)
A4 = stainless teel, corrosion resistance class (CRC) III
acc. to EN 1993-1-4: 2015-10, Table A.3
For countries not listed HALFEN International GmbH Phone: +49 - 2173 - 970 - 0 Fax: +49 - 2173 - 970 - 849
HALFEN International Liebigstr. 14 E-Mail: info@halfen.com
40764 Langenfeld / Germany Internet: www.halfen.com
F - 020 - E - 10/18
HALFEN is represented with sales offices and distributors worldwide. Please contact us: www.halfen.com
The HALFEN GmbH subsidiaries in Germany, France, the Netherlands, Austria, Poland, Switzerland and the Czech Republic
are Quality Management certified according to ISO 9001:2015, Certificate no. 202384-2016-AQ-GER-DAkkS.
www.dnvgl.com