Ender
Ender-3 3D Printer
User Manual
@ This Manual is for the Ender-3 3D printer.
Select the correct input voltage to match your local mains
(230 or 115V)
@ Because of sofiware/hardware upgrades and model
differences, new revisions may not be listed in this guide.
® Detailed instructions for use are available in the TF card.Notes
1. Do not use the printer in other wrong ways to avoid personal injury or property damage.
2. Do not place the printer near any heat source or flammable or explosive objects. We
Suggest placing it in a well- ventilated, low- dust environment.
3. Do not expose the printer to violent vibration or any unstable environment, as this may
Cause poor print quality.
4. Before using experimental or exotic filaments, we suggest using standard filaments such as
ABS or PLA to calibrate and test the machine.
. Do not use any other power cable except the one supplied. Always use the three- pin plug .
.Do not touch the nozzle or printing surface during operation as they may be hot. Keep
hands away from machine while in use to avoid burns or personal injury.
7.Do not wear gloves of loose clothing when operating the printer. Such cloths may become
tangled in the printers moving parts Teading to burns, personal injury, or printer damage.
8. When cleaning debris from the printer hotend, always use the provided tools. Do not touch
the nozzle directly when heated. This can cause personal injury.
9. Clean the printer frequently. Always turn the power off when Cleaning, and wipe with a dry
cloth to clean dust, adhered printing plastics or any other material from the frame, guide
rails, or wheels . Use glass cleaner of isopropyl alcohol to clean the print surface before
every print for consistent results
10.Children under the age of 10, should not use the printer without any supervision.
11.Tips: This machine is equipped with a security protection mechanism. Do not manually
move the nozzle and printing platform mechanism manually while booting up, otherwise the
device will automatically power off for safety!
auContents
5. Software Installation
6. Preparing to Print
7, Trouble-Shooting .....
8. Circuit Wiring Diagram
1, Introduction ..
2. Screen Information ....
3. Loading Filament ....
4, Bed Levelling
Preface
Dear Customers:
Thank you for choosing our products. For the best experienee, please read the instructions before operating the Printer. Our 3D team is always
ready to provide you with assistance, Please contact us via the phone number or e-mail address provided at she end when you encounter any
problem with the Printer,
Fora better experience in using our product, you may learn how to use the Printer in the following ways:
1. Learning from the instructions and videos that come with your TF card.
2, Visit our official website: www.ereality.eom_ You will find relevant software/hardware information, contact details and operation and
‘maintenance instructions onthe websiCREALITY | sterner creatty 20 Technology 00,70.
1. Introdution
4 2
3
Control Box
‘TF Slot and USB Port
Print Surface
Control Knob
Display
Nozzle Assembly
Spool Holder
Extruder (E) Stepper
10,
ML.
12,
7
8
9
. iE
19,
11
12 13 14
Power 13. Z Stepper
Y Limit Switch 14, Z Limit Switch
Y Stepper 15. X Limit Switeh
Coupling 16. X Stepper
16
15Sherchen Creaity 90 Testoiosyco..10. CRREALITY
2. Screen Infromation
‘Common Functions
. . Ten Sub Mena Eaton
Information Displayed Tle ren = 7
[feapnrera]
Sout
Print speed oan se
eee Desbienepen [ROY ZARB
Model Set tempeatarsoibe we paves NS
[Current temperature of Preheat ABS
ar Cotg Fon Spend ——
Coren enn othe cna
= Print time
Print progress =
[Prompt message Spe rene 2 Pe
ome ere
ms Fonseca | Chae Fo ered gn
@ Push: OK/Enter Sub Mena Flew ser Samer se
@ ‘Turn; Change Option/Value ane aneCREALITY stecetencreaiy 30 Techroioay 00,170.
3. Loading Filament
1. Preheat
‘Method 1
3
2. Feeding
.
ress and hold the extruder lever then inser 1.75mm filament through the small
hole of the extruder. Continue feeding until you see filament out ofthe nozzle.
Tip: Replacing the Filament
1, Cutting filament near the Exteuder and slowly feed
‘new filament until the new filament get into the PTFE,
tube.
24. reheating the nozzle, Press and hold the extruder,
extract the filament, then feed the new filament.Sherchen Crelty 30 Tectnooay co... CREALITY
4. Bed Levelling
1, Prepare —+Auto Home.
left/front ofthe platform.
2. Prepate—Disable Steppers
ts
i
oe
3. Move the nozzle tothe frontieft leveling serew and adjust te platform
height by turning the knob undemeath, Use a piece of Ad paper (standard
printer paper) to assist with the adjustment, making sure that the nozzle
lightly seratches the paper.
4. Complete the adjustment on all 4 comers
5. Repeat above steps 1-2 times if nocessaryCREALITY | sterner creatty 20 Technology 00,70.
i
Creality
Slicer 1.2.3
1, Double click to
install the software,
ICREALITY|
la
Creality Slicer
2. Double click to
open the software,
. Software Installation
3. Select language—>Next->Select your machine>Next—>Finish.Sherchen Crelty 30 Tectnooay co... CREALITY
6. Preparing to Print
1 Slicing
[eri
ICREALITY| = ) =
Bn
ra ; : paren
Creality Slicer
Open the software-+Load->Select the file-*Wait for slicing to finish ,and save the gcode file to TF card.
2.Printing
Insert the TF card-+ Int. TF- Card — Print from TF—Select the file to be printed.CREALITY srecren coaty 20 tectology 00,70.
7. Trouble shooting
ii
iSherchen Crelty 30 Tectnooay co... CREALITY
8. Circuit Wiring Diagram
'
0 GO oe
coeee(]——uuoma] wna iS} S]
z o 2
§ a) °
ee p son oon _ non
Dall 2
I IAfter- Sales Service
Service
4, The printer can be returned within seven day, 15 days replacement,
‘oe year warranty, feline maintenance
Replacement requirement
1. The appearance ofthe product sitact, without damage, scratches,
Smudge craks, Seformation et
2. Machine parts, tools and others are complete:
5. Provide a complete and valid purchase invoice and warranty, product
ruanber shouldbe the same
Warranty coverage
1. The flowing accessories are not included inthe vatrany coverage
i they are not damaged by transportation: platform sticker, platform
forming pate; acryle cover card reader and TF card platform glass:
US cable filament ack ad tok te
2. Profle: Before we deliver the goods, we wil do the machine test so
maybe there vllbe ight scratch, of due to long stance
{Mansporaton which scratch the profile aI bt inthe premise of
nat affecting the normal we, in principe et within the scope of
waranty
3. Nozle assembiy (noe, heating block, throat poe eat sink Teflon
‘ube, etc) warranty period is 3 months, fis damage after the
‘waranty expres, You need o purchase anather one:
4. Motherboard, LCD display, power suppy ot bed vatrany period is
12 months, here are qulty problems, you can get free
maintenance; over the warratypevod, canbe sent back to the
‘tgalfactry matenance, the users need fo bear the Feta
Shiping and matntenance cost
5, Not included in waranty coverage:
in} es ot posible to provid an effective after-sales sence car
‘sei number,
(2) The whole machine and components exceed the waranty petod:
(3) Equipment fale or damage caused by unauthorized modification
of the equipment (private modification cludes: 1. modification of
the nozale assembly 2. medication ofthe machine structure, 3. use
‘of thea party components 4. use of td: party mare procedures
‘or change the engal Factory Temuare program etc},
(4) Equipment faire or damage du to incorect installation and se;
(5) Equipment flare or damage caused bythe use of the equipment
ina working enironment not specfied by the product
(6) Equipment faire or damage due imoroper use (beyond workload,
fete} or maintenance (most, ete],
(7) Equipment failure or damage due to the use of eter branded
‘Components of ow quality consumables
Statement:
For better Nghlghtng the function and effectiveness of 3d printer
and promoting the development of global market economic,
Strengtering the use sel discipline of 3¢ industry aed establishing &
‘goed Image of 3d printing, since Crealty 3d printer have passed all
Kinds of authorized product certificates and quality management
"yrtemeraby we decor tat ied forbidden to ure our printer
{a print any products or equprnen that ae in elation af the specie
‘county and regions legionarn He Ce MEE O®