Professional Documents
Culture Documents
erewol
sewing pattern
legendary
creatures
collection
www.cholyknight.com
sew desu ne? www.cholyknight.com
difficulty:
werewolf
plush sewing pattern
The hardest parts of this plush are likely the
Any fan of monster movies, horror, or dark
sharp corners found on the sides of the head,
fantasy stories will surely recognize this
the tail, and the collar. Tracing the stitching
creature. The classic Lycanthrope is a half-man
lines for those areas is highly recommended.
half-wolf that changes at the sight of a full
moon. skills needed:
This plush is a cute version of the staple • fusible web applique
fantasy creature, complete with big foot paws • darts
and a ruffled neck. Fans of wolves or fantasy • ladder stitch
werewolf plush
2 introduction
www.cholyknight.com
suggested fabrics
Minky or fleece
Any of the variations of fleece and minky shown
fleece at the left will work nicely for this pattern. Slightly
thick versions with a bit of stretch along the
anti-pill fleece crosswise grain of the fabric work the best.
Stretchy fabrics like these create a squat, round
shape when stuffed. Non-stretchy fabrics, like felt
micro fleece or cotton, won’t create this effect and result in an
elongated shape as shown.
cuddle fleece minky vs. felt
minky
werewolf plush
faux fur
Starter tools
sew desu ne?
If you’re new to sewing and a little baffled by all the sewing tools needed to get
started, check out the list here. It describes all the absolute basics for tackling a project in a
format that lets you choose how much you want to spend. Some of these items you might
already have around the house!
As you collect tools for your arsenal over time, consider adding tools that are more
job-specific -- these items come with the note suggesting buying all 3. Just buy these in the order
shown as your funds allow. This will build your collection from more generic tools to more specific,
and you’ll be able to tackle more techniques and projects in the future!
4 starter tools
www.cholyknight.com
Don’t need anything fancy for this. Unlike other types of sewing, plush
Everyone makes mistakes and projects don’t need much ironing.
everyone needs a seam ripper. But they’re handy for fusible web
applique or for pressing crisp fabrics.
starter tools
5
www.cholyknight.com
To print the pattern, set your computer to print pages 19-22. If you’re
unfamiliar with printing and assembling a .pdf pattern, read the steps below.
1. print the test square. 2. measure the text square 3. collect the pages
At the print dialog box, check Get a ruler and measure the test With the settings all right, print
the box that says print at “Actual square to be sure it matches the the rest of the pattern, pages
Size” or 100%. Any other selection dimensions printed in the pattern. 20-22. Be sure you have the full
(such as “Fit to page”) will distort If it’s smaller than the printed size, collection by noting the page
the pattern so it’s slightly larger increase your printer settings. If numbers in the corner.
or smaller and we don’t want it’s larger, decrease the printer
that. Set it to print the test square, settings.
found on page 19.
With your supplies gathered and your pattern printed, you can finally move
onto cutting your fabric. If you’re unfamiliar with the procedure, see the steps
here. Also check out the cutting layout for an at-a-glance view of how your pieces
should look.
¼ yd.; 9” long
C C F F
nap /pi le
A B B F F
D D D D
40” wide
nap /pi le
H H E E G G
7” wide 27” wide
werewolf plush
7 cutting layout
sew desu ne? www.cholyknight.com
Take your fusible web and trace the face pieces onto the smooth (paper) side. You should have two eyes, two
eye shadows, two eye shines, one nose, and six whiskers. Fuse the bumpy (adhesive) side onto the wrong
side of your applique fabrics. The eyes, nose, and whiskers are fused to black fabric. The eye shines are fused
to white. And the eye shadows are fused to dark brown (or some other dark accent color).
Cut out the face pieces and arrange the eye shadows on the head front (A) piece from your main fabric. You
can do this by setting your paper pattern on top of the fabric piece (right sides up), align the applique piece
on top where the placement markings are, then carefully pull the paper pattern away while holding the
applique piece in place.
right side of
zigzag lands just
you could also use French outside applique
knots for the whiskers (since shape
they’re so small)
werewolf plush
Fuse the eye shadows in place with your iron (use a press cloth -- such as a scrap piece of cotton -- if you’re
using a polyester or fur fabric like minky). Align the eyes, nose, whiskers, & eye shines in the same way,
using the paper pattern (and the photo) as a guide.
If you used heavy duty fusible web, you can keep the pieces fused without sewing, or you can sew them in
place a number of ways. I’ve used a zigzag stitch here.
Refer to the next step for some other applique options.
Other good options for applique include a straight stitch, which involves sewing around the edge of the
applique pieces with a straight stitch using matching thread -- about 1/8” in from the edge.
You can also applique by hand; I prefer a whipstitch. Thread a hand-sewing needle with some matching
thread and knot it. Bring the thread up from the back of the project; about 1/8” in from the edge of the
applique shape. Bring it down perpendicular from the curve, just outside of the applique shape. This
completes one stitch.
For the next stitch, bring the needle back up about 1/8” away from the previous stitch and 1/8” in from the
edge just as in the first stitch. Once again, bring it down just outside the applique shape. Continue this way
until you’ve sewn around the shape.
Fold the Head Front (A) in half with right sides facing, matching up the darts found at the top and bottom of
werewolf plush
the piece. Sew the darts by starting at the opening and moving down to the point.
When sewing the point, try to blend the seam in with the fold so it makes a smooth transition and a rounder
finished plush.
Gather up your Head Back (B) pieces. If you haven’t already, find the opening for turning markings from
the paper pattern and transfer them over to the wrong side of the fabric. Take the two pieces and align them
with right sides facing.
Sew along this edge, leaving an opening where the markings indicate for turning the head later.
The little fur tufts on the side of the head are a little detailed. So to sew them accurately I suggest trimming
off the seam allowance from the head back piece and using it as a tracing template along the side of the
head as shown.
Take the head front and back pieces and align them with right sides facing and raw edges together. The
top seam of the back pieces should match up with the top dart on the head front. The bottom seam should
match up with the bottom dart. All the fur spikes and ears should also align.
Sew around the perimeter of the head. Trim the excess seam allowance at the tight curves found in the fur
werewolf plush
spikes to reduce bulk. Also clip into the tight corners found near the ears to increase flexibility.
When complete, turn the head right side out.
Stuff the head fully with stuffing. Start by pushing each small clump
into the ears, then towards the sides and bottom until the face looks
full. Then finally stuff the center so the whole head is round.
2 1
Once the plush is stuffed, make sure the seam allowances in the
opening are tucked inside and prepare to ladder stitch it closed.
Thread a hand-sewing needle and knot it at the end. Insert the needle
from the inside of the opening and out of the plush near one edge of 4
the opening. This will leave the knot inside the plush. 3 seam allowance
(folded inside)
Continue from here doing a ladder stitch. Take a 1/8” stitch into the
fold of one side of the opening, then go across and take another. Keep
going down the opening until you reach the end.
When you’re finished, stitch a knot into the end of the seam. Then insert the
needle near the finished knot and out of the plush about 1-2” away. A ladder stitch is also
sometimes called a
Pull the thread through and hold it taut while snipping the thread. The excess slip stitch, hidden
stitch, or invisible
thread should sink back inside the plush -- all hidden! stitch.
werewolf plush
Align two of your Arm pieces (D) together with right sides facing.
Sew the two pieces together along the long curved edge, leaving the short straight edge free for turning right
side out. Repeat with the other two pieces for two arms total.
Once complete, stuff them lightly with stuffing.
match up
bottom dart
‘legs’
Fold the Body Front (C) in half with right sides facing, matching up the dart found at the bottom of the
piece. Sew the dart by starting at the opening and moving down to the point.
When sewing the point, try to blend the seam in with the fold so it makes a smooth transition and a rounder
finished plush. Repeat this with the other body piece, which will now be the back.
If you haven’t already, find the arm placement lines from the paper pattern of the body piece. Transfer them
over to the right side of the body front. Align the open ends of the arms with these placement lines. Each
arm should curve slightly up towards the neck and point towards the middle of the body as shown.
line up
bottom darts
Once aligned, baste the arms in place within the seam allowance.
Tuck the arms into the center of the body front. Take your body back basting:
piece and align it to the body front with right sides together and the arms A form of temporary sewing
meant to hold pieces in place. A
all tucked inside. Align the sides and bottom, matching up the bottom
werewolf plush
Grab your one of your collar pieces (E). Fold it in half widthwise to bring together the two short straight
edges found on the ends of the collar.
Sew the collar along this edge. Repeat with the remaining collar piece for two collars total.
Align the two collars by wrapping one within the other (right sides facing). Match up all the points and the
side seam.
Next up is to sew the collar pieces together along the spiked edge. To get the spikes just right, I suggest using
the paper pattern as a template. Trim the seam allowances off the paper pattern and align it with the collar
pieces. Trace along the edge to mark your stitching lines.
Sew the collar pieces together along the spiked edge, being sure to pivot at each corner.
werewolf plush
Trim the excess seam allowance at the outer corners (to reduce bulk). Also clip the seam allowances at the
inner corners (to increase flexibility).
Turn the collar right side out and define the spikes with a chopstick or similar turning tool.
Wrap the collar around the opening of the body, lining up the open edge of the collar with the open edge
of the body. The side seam of the collar should also line up with (any) one of the side seams of the body.
Ideally, the biggest spike in the collar should sit right in the middle (on the front and back sides).
Once everything is aligned, baste the collar in place (within the seam allowances) around the opening of the
body.
fill until
almost full
a spoon for this, but some people prefer a funnel. Once you’ve back stitch:
finished, thread a hand sewing needle and stitch the opening A kind of straight stitch where the needle
is brought forward about ¼” then back ⅛”
closed with a whipstitch or backstitch. along a line. This is repeated, creating a
dotted line on one side and a solid line of
stitches on the other.
position arms
as desired;
ladder stitch in
place
Place the head on top of the body; the bottom of the head should align on the center of the cinched up body
opening and the eyes should face forward. The side seams of the head should line up with the side seams
of the body. The front and back seams of the head should also line up with the front and back darts of the
body.
werewolf plush
Stitch it in place with a ladder stitch as you did in steps 10-11. I sewed about 1½” out from the center of the
body.
If desired, pin the arms to the body in a position that you like so the hands look like they’re resting on the
wolf ’s chest. Stitch them in place with more ladder stitching.
Take your fusible web and trace the toes and foot pad pieces onto the smooth (paper) side. You should have
two pads and six toes. Fuse the bumpy (adhesive) side onto the wrong side of your pink applique fabric.
Cut out the toe/pad pieces and arrange them on the foot pieces (F) from your main fabric. You can do this by
setting your paper pattern on top of the fabric piece (right sides up), align the applique piece on top where
the placement markings are, then carefully pull the paper pattern away while holding the applique piece
in place (as back in step 1). Finish the applique like back in steps 2 and 2a by sewing the pieces in place.
Repeat for two foot pieces as shown.
Once complete, take one of your blank foot pieces and one with applique and align them with right sides
facing.
toes pointing up
Stuff the feet lightly with stuffing, then go back and whip stitch the opening you cut closed like you did in
step 13. If you have a lot of thread left over, consider leaving it so you can use it to attach the feet later.
Place the feet on the bottom front of the wolf (foot pads facing outward and toes pointed up). The bottom of
the feet should be flush with the bottom of the body. Pin them in place if desired, but set them up how you
like so you can attach them.
Using a ladder stitch, sew the feet in place around the whip stitch you did earlier. Repeat for both feet, and
be sure to check your progress as you sew so the feet are situated right.
Take your two tail pieces (G) and align them with right sides facing.
Like with the collar, the tail has some spikes that are difficult to sew accurately. I suggest trimming off the
seam allowance from the paper pattern and using it as a template. Line it up with the tail pieces and trace
the outer edge where the spikes are as shown.
werewolf plush
Sew the tail pieces together along the spiked edge, leaving the short straight edge free for turning right side
out. Be sure to follow the traced lines when sewing the spikes and to pivot at every corner.
Just like with the collar, trim the outer curves of the tail spikes to decrease bulk, and clip the inner curves
close to the seams to increase flexibility.
Turn the tail right side out and define the corners with a chopstick or similar blunt tool.
Stuff the tail lightly with stuffing. Start with small bits to go into each spike, then working your way toward
the opening.
Thread a hand-sewing needle and knot the end. Sew a gathering stitch around the opening of the tail just
as you did in step 14 with the body. Pull at the thread to cinch the tail closed, and sew a few knots into the
opening to fasten it. If you have a lot of thread left over, consider leaving it attached to sew on the tail next.
Position the tail at the lower back of the wolf. It should be centered over the back body dart. Make sure the
spikes are pointing upward as well. Once it’s aligned, sew the tail in place with a ladder stitch much like you
did the body and head.
werewolf plush
STRETC H
A1 A2
top
da
rt
NAP
applique
placement
WEREWOLF
plush sewing pattern
HEAD FRONT
A
bo
tto
m
¼” seam allowance
rt
ST
RE
TC
H
TEST SQUARE
P
2”
NA
ARM
measure this square to be D
sure you’ve printed at the D Cut 4 of brown fabric
proper proportions ¼” seam allowance
/4 pg. 2/4
ing
turn
A1 A2
for
ing
open
WEREWOLF
plush sewing pattern
HEAD BACK
B
NAP
Cut 2 of brown fabric
¼” seam allowance
STRETC H
F
NAP
applique
placement FEET
STRETC H
F
Cut 4 of brown fabric
¼” seam allowance
opening for turning
STRETC H
WEREWOLF
NAP
¼” seam allowance plush sewing pattern
Cut 2 of dark brown fabric
G BEAN POUCH
H
Cut 2 of scrap fabric
TAIL
¼” seam allowance
COLLAR
E
Cut 2 of dark brown fabric
¼” seam allowance
NAP
E
STRETC H
pg. 3/4
pg. 4/4
arm
t
en
cem
pl a
pl a
cem
arm
en
WEREWOLF
t
plush sewing pattern
BODY
C
Cut 2 of brown fabric
¼” seam allowance
NAP
STRETC H
bo
tto
m
da
tr
EYE SHADOW
applique
Cut 1 each in dark
brown
WHISKERS
applique
EYES Cut 6 in black
applique
Cut 1 each in black