Invendis
Invent, Discover.
iSense Green installation Manual
3.3.9 GSM
The GSM in iSense ~Green can support two SIM cards and it has separate slot for each SIM card. It has a provision
to fix GSM antenna for better signal strength. Below is the image of GSM in iSense-Green,
3.3.10 Ethernet (Network Backhaul)
The Ethernet in iSense ~Green can support to IP DNS based data transferring to configured server, here we
required IP, SUB NET Mask and Gate way address for configuring the communication through Ethernet.
3.3.11 USB
The USB port in iSense ~Green is used to connect our laptop to perform configuration. Below is the image of
USB port in iSense Green,
3233,
Invendis
Invent, Discover.
iSense Green installation Manual
Below is the image of connecting laptop with iSense ~Green using an USB cable.
Green
3.3.12 LED Sequence
There are three LED indicators, namely Wifi, GPRS, GSM and Power on iSense ~Green,
1. Power:
Ithas two LED status
Red: When the device gets powered on, LED status becomes red, until device gets stabilized.
Green: When device get stabilized, LED status becomes green.
2. GSM
Ithas two LED status
Red: If SIM card is not present in MODEM, LED status becomes red,
Green: If SIM card is present in MODEM, LED status becomes greenInvendis
Invent, Discover.
iSense Green installation Manual
3. GPRS:
Ithas two LED status
Red: If GPRS signal is not proper, LED status becomes red.
Green: If GPRS signal is good, LED status becomes green.
If Green LED is blinking, then it denotes that the controller is sending data to server,
Below is the image of iSense-Green, which has power, GSM, GPRS LED status as green.
3.4 _ Installing iSense -Green
The installation of iSense —Green is as follows,
+ The iSense-Green is mounted into an enclosure, with the help of four M6X10 screw.
* The power supply for iSense —Green is obtained from 48V output of rectifier
‘The 48V DC power is supplied through a MCB
34