You are on page 1of 1

Steel and cast iron standards

EN 10162:   Steel grades /numbers

EN 10162 : 2003   Cold rolled steel sections. Dimensional and cross-sectional


tolerances  Compare  

          1.0115             S235J0C           1.0119             S235J2C


          1.0122             S235JRC           1.0128             S275JRC
          1.0140             S275J0C           1.0142             S275J2C
          1.0241             S220GD           1.0242             S250GD
          1.0244             S280GD           1.0250             S320GD
          1.0529             S350GD           1.0554             S355J0C
          1.0579             S355J2C           1.0594             S355K2C

You might also like