Professional Documents
Culture Documents
Fujifilm Finepix s5200 Users Manual 403062
Fujifilm Finepix s5200 Users Manual 403062
2 Using
the Camera
3 Advanced
Features
4 Settings
5 Software
Installation
6 Viewing Images
OWNER’S MANUAL
This manual will show you how to use your
FUJIFILM DIGITAL CAMERA FinePix S5200 / FinePix S5600 correctly.
Please follow the instructions carefully.
BL00484-200 (1)
Warning EC Declaration of Conformity
To prevent fire or shock hazard, do not expose the unit to rain or moisture. We
Name: Fuji Photo Film (Europe) G.m.b.H.
For customers in the U.S.A. to correct the interference by one or more of the following
Address: Heesenstrasse 31
measures:
Tested To Comply — Reorient or relocate the receiving antenna. 40549 Dusseldorf, Germany
With FCC Standards — Increase the separation between the equipment and receiver.
FOR HOME OR OFFICE USE — Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
declare that the product
FCC Statement — Consult the dealer or an experienced radio/TV technician for Product Name: FUJIFILM DIGITAL CAMERA FinePix S5200 / FinePix S5600
This device complies with part 15 of the FCC Rules. Operation help. Manufacture’s Name: Fuji Photo Film Co., Ltd.
is subject to the following two conditions: (1) This device may You are cautioned that any changes or modifications not Manufacture’s Address: 26-30, Nishiazabu 2-chome, Minato-ku,
not cause harmful interference, and (2) this device must expressly approved in this manual could void the user’s authority
to operate the equipment.
Tokyo 106-8620, Japan
accept any interference received, including interference that
may cause undesired operation. Notes on the Grant:
To comply with Part 15 of the FCC rules, this product must be
is in conformity with the following Standards
CAUTION used with a Fujifilm-specified ferrite-core A/V cable, USB cable Safety: EN60065
This equipment has been tested and found to comply with the and DC supply cord. EMC: EN55022: 1998 Classe B
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable EN55024: 1998
protection against harmful interference in a residential
For customers in Canada EN61000-3-2: 1995 + A1: 1998 + A2: 1998
installation. This equipment generates, uses, and can radiate CAUTION
radio frequency energy and, if not installed and used in This Class B digital apparatus complies with Canadian ICES-003. following the provision of the EMC Directive (89/336/EEC, 92/31/EEC and
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no 93/68/EEC) and Low Voltage Directive (73/23/EEC).
guarantee that interference will not occur in a particular Please read the Safety Notes (➡P.135) and make
installation. If this equipment does cause harmful interference sure you understand them before using the camera.
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u
4. Ownership. ze niet weggooien maar inleveren als KCA
NOTICE All copyrights and other proprietary rights to Software and
Documentation are owned and retained by FUJIFILM or the third party
BEFORE OPENING THE CD-ROM PROVIDED BY FUJI suppliers as indicated on or in Software or Documentation. Nothing
PHOTO FILM CO., LTD., PLEASE READ THIS END USER contained herein shall be construed, expressly or implicitly, as
transferring or granting any right, license, or title to you other than those
LICENSE AGREEMENT CAREFULLY. ONLY IF YOU
AGREE WITH THIS AGREEMENT, SHOULD YOU USE THE
SOFTWARE RECORDED ON THE CD-ROM. BY OPENING
explicitly granted under this Agreement.
5. Limited Warranty. Disposal of Electric and Electronic Equipment in Private Households
FUJIFILM warrants to you that Media is free from any defect in material
THE PACKAGE, YOU ACCEPT AND AGREE TO BE and workmanship under normal use for ninety (90) days from the date of
BOUND BY THIS AGREEMENT. your receipt of Media. Should Media not meet the foregoing warranty,
FUJIFILM shall replace such defective Media with other Media bearing Disposal of used Electrical & Electronic Equipment (Applicable in the European Union and other
no defect. FUJIFILM’s entire liability and your sole and exclusive remedy
with regard to any defect in Media shall be expressly limited to such European countries with separate collection systems)
End User License Agreement FUJIFILM’s replacement of Media as provided herein
6. DISCLAIMER OF WARRANTY.
This End User License Agreement (“Agreement”) is an agreement between EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM This symbol on the product, or in the manual and in the warranty, and/or on its packaging
Fuji Photo Film Co., Ltd. (“FUJIFILM”) and you, which sets forth the terms PROVIDES PRODUCT “AS IS” AND WITHOUT WARRANTIES OF indicates that this product shall not be treated as household waste.
and conditions of the license granted for you to use the software provided by ANY KIND, EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO
FUJIFILM. WARRANTY, EXPRESS, IMPLIED OR STATUTORY, AS TO ANY Instead it should be taken to an applicable collection point for the recycling of electrical
The CD-ROM contains third party software. In case a separate agreement is OTHER MATTERS, INCLUDING, BUT NOT LIMITED TO NON-
provided by a third party supplier for its software, the provisions of such INFRINGEMENT OF ANY COPYRIGHT, PATENT, TRADE SECRET, and electronic equipment.
separate agreement shall apply to the use of such third party software, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY,
prevailing over those of this Agreement. MARCHANTABILITY, OR FITNESS FOR ANY PARTICULAR By ensuring this product is disposed of correctly, you will help prevent potential negative
1. Definitions. PURPOSE.
(a) “Media” means the CD-ROM titled “Software for FinePix CX” which is 7. LIMITATION OF LIABILITY.
consequences to the environment and human health, which could otherwise be caused by
provided to you together with this Agreement. IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY inappropriate waste handling of this product.
(b) “Software” means the software which is recorded on Media. GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL,
(c) “Documentation” means the operation manuals of Software and other INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FOR If your equipment contains easy removable batteries or accumulators please dispose these separately
related written materials which are provided to you together with LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE USE
Media. OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS BEEN according to your local requirements.
(d) “Product” means Media (including Software) and Documentation ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
collectively. 8. No export.
The recycling of materials will help to conserve natural resources. For more detailed information about
2. Use of Software. You acknowledge that neither Software nor any part thereof, will be recycling of this product, please contact your local city office, your household waste disposal service or the
FUJIFILM grants to you a nontransferable, nonexclusive license: transferred, or exported to any country or used in any manner in
(a) to install one copy of Software onto one computer in binary machine violation of any export control laws and regulations to which Software is shop where you have purchased the product.
executable form; subject.
(b) to use Software on the computer onto which Software is installed; 9. Termination.
and In case you breach any of the terms and conditions hereof, FUJIFILM
In Countries outside the EU:
(c) to make one backup copy of Software. may immediately terminate this Agreement without any notice. If you wish to discard this product, please contact your local authorities and ask for the correct way of
3. Restrictions. 10. Term.
3.1 You shall not distribute, rent, lease or otherwise transfer all or any This Agreement is effective until the date when you cease to use disposal.
part of Software, Media or Documentation to any third party without Software, unless earlier terminated in accordance with Section 9
FUJIFILM’s prior written consent. You also shall not sublicense, hereof.
assign or otherwise transfer all or any part of the rights granted to
you by FUJIFILM under this Agreement without FUJIFILM’s prior 11. Obligation upon termination.
written consent. Upon termination or expiration of this Agreement, you shall, at
3.2 Except as expressly granted by FUJIFILM hereunder, you shall not your own responsibility and expense, delete or destroy
copy or reproduce all or any part of Software or Documentation. immediately all Software (including its copies), Media and
3.3 You shall not modify, adapt or translate Software or Documentation. Documentation.
You also shall not alter or remove copyright and other proprietary 12. Governing Law.
notices that appear on or in Software or Documentation. This Agreement shall be governed by and construed in
2 3.4 You shall not, or shall not have any third party, reverse-engineer,
decompile, or disassemble Software.
accordance with laws of Japan.
3
Contents
Warning .............................................................................. 2 Accessories included .......................................................... 7 B PLAYBACK
IMPORTANT ...................................................................... 2 Camera parts and features ................................................. 8 PLAYBACK FUNCTIONS
EC Declaration of Conformity ............................................. 3 Example of screen text display ...................................... 9 PLAYBACK INFORMATION ................................................................................................................................................... 66
Disposal of Electric and Electronic Equipment in Private Households 3 ■ Photography mode ............................................... 9 PLAYBACK MENU
Preface ............................................................................... 6 ■ Playback mode ..................................................... 9
Ò ERASING SINGLE / ALL FRAMES ................................................................................................................................. 67
Ú IMAGE ROTATE .............................................................................................................................................................. 69
p PHOTO MODE PLAYBACK
1 Getting Ready ¸ HOW TO SPECIFY PRINT OPTIONS (DPOF) ................................................................................................................ 70
¸ SPECIFYING DPOF SETTINGS EASILY ........................................................................................................................ 71
STRAP / ATTACHING THE LENS CAP ................................................................................................................................. 10
Attaching the lens cap ...................................................................................................................................................... 10 PLAYBACK MENU
LOADING THE BATTERIES ................................................................................................................................................... 11 ¸ DPOF SET FRAME .......................................................................................................................................................... 73
Compatible batteries ........................................................................................................................................................ 11 ¸ DPOF ALL RESET ........................................................................................................................................................... 75
INSERTING THE xD-Picture Card ........................................................................................................................................ 12 Ç PROTECTING IMAGES: FRAME / SET ALL / RESET ALL ............................................................................................ 76
Checking the battery charge ............................................................................................................................................ 13 ◊ AUTOMATIC PLAYBACK ................................................................................................................................................ 78
TURNING ON AND OFF / SETTING THE DATE AND TIME ................................................................................................. 14 Â RECORDING VOICE MEMOS ........................................................................................................................................ 79
CORRECTING THE DATE AND TIME / CHANGING THE DATE FORMAT .......................................................................... 15 Â PLAYING BACK VOICE MEMOS .................................................................................................................................... 81
SELECTING THE LANGUAGE ............................................................................................................................................... 17 ■ Playing back voice memos ........................................................................................................................................... 81
6 7
✽ Refer to the pages in parentheses for information on
Camera parts and features using the camera parts or features.
Power-OFF
EVF/LCD
(monitor selector) MENU/OK button (P.20)
Shutter button button (P.19, 21)
Focus mode
selector button (P.18) Low light view Photo mode ( ) button
Exposure compensation button (P.19, 53) (P.20)
button (P.43)
LCD monitor DISP (display) / BACK
Continuous shooting button (P.20, 27, 28)
button (P.50)
Focus mode
selector lock switch
(P.18 , 21, 44-45) Tripod mount Battery cover (P.11)
Getting Ready
which alkaline batteries can be used decreases in cold conditions (0°C to +10°C/+32°F to +50°F).
The use of AA-size Ni-MH batteries is better for this reason.
h Use Fujifilm Battery charger (sold separately) to charge AA-size Ni-MH batteries.
h See P.118-119 for other notes on using batteries.
h When first purchased or if left unused for a long period, the amount of time which AA-size
Ni-MH batteries can be used may be short. See P.119 for more information.
●
! Attach the lens cap cord to prevent losing the lens cap.
Check that the camera is turned off (set the Power
3 Attaching the lens cap 1 switch to “OFF”) before opening the battery cover.
Make sure that the lens cap does not appear in ●
! If opening the battery cover while the camera is still on, the
your shot when taking a picture, attach it to the camera will turn off.
strap. ●
! Do not apply force to the battery cover.
Do not open the battery cover while the camera is
on. This could damage the xD-Picture Card or ruin
the image files on the xD-Picture Card.
10 11
INSERTING THE xD-Picture Card
Set the Power switch to “OFF”. Open the slot
1 cover.
Checking the battery charge
Turn the camera on and check the battery charge.
●
! If opening the slot cover while the camera is still on, the
camera will turn off. 1 There is ample battery charge.
1 No icon 2 There is insufficient charge left in the batteries.
Do not open the slot cover while the camera is on. The batteries will soon run out. Have a new set
This could damage the media or ruin the image of batteries ready.
files on the media. 2 Lit red
3 The batteries are depleted. The display will
shortly go blank and the camera will stop
Align the gold marking on the xD-Picture Card slot 3 Blinking red working. Replace or recharge the batteries.
2 Gold
contact
area
with the gold contact area on the xD-Picture Card
and push the card firmly all the way into the slot.
“C” appears as a small icon on the left-hand side
N 12 of the screen. “V” appears as a large icon in the
center of the screen.
1
●
! If the xD-Picture Card is oriented incorrectly, it will not go all
Getting Ready
Gold marking the way into the slot. Do not apply force when inserting an Lit red
xD-Picture Card.
Blinking red
12 13
TURNING ON AND OFF / SETTING THE DATE AND TIME CORRECTING THE DATE AND TIME / CHANGING THE DATE FORMAT
To turn the camera on, set the Power switch to “q” Press the “MENU/OK” button to display the menu
1 or “w”.
To turn the camera off, set the Power switch to
1 on the screen.
“OFF”.
SELF-TIMER
OFF
1 :
: AUTO OFF
When using the camera for the first time after : OFF
2 DATE/TIME NOT SET purchasing, the date and time are cleared.
Press the “MENU/OK” button to set the date and
2 :
: SET
time.
Getting Ready
2 Press “c”.
SET NO
●
! The message also appears when the batteries have been
removed and the camera has been left for a long period.
●
! To set the date and time later, press the “DISP/BACK” button. SET-UP
●
! If you do not set the date and time, this message will appear
: OFF
each time you turn the camera on.
1 :
: AUTO
: OFF
3 DATE/TIME
2007
1 Press “d” or “c” to select Year, Month, Day,
Hour or Minute.
2 Press “a” or “b” to correct the setting.
2 :
SET
2006
Y Y. M M . D D 2005 1 1 1 2 00
2004 AM
SET
2003
CANCEL
3 01 2
0
1 Press “d” to move to page number.
2 Press “a” or “b” to select “PAGE 3”.
1
0 2
0
●
! Holding down “a” or “b” changes the numbers continuously. PAGE 3
●
! When the time displayed passes “12”, the AM/PM setting
: SET
changes. 1 : SET
2 : ENGLISH
Once you have set the date and time, press the : SET
4 DATE/TIME
02
“MENU/OK” button. Pressing the “MENU/OK”
button changes the camera to Photography or
3
4
:
: NTSC
01
Playback mode.
Y Y. M M . D D 2005. 7.24 10 00
AM 59
SET CANCEL
58
4 01 03 2
0
1 Press “c” to move to menu item.
2 Press “a” or “b” to select “ì” DATE/TIME.
3 Press “c”.
●
! At the time of purchase and after leaving the camera for a
long period with the batteries removed, settings such as the
date and time are cleared. Once the AC power adapter has
been connected or the batteries have been installed for 2 DATE/TIME
hours or more, the camera settings will be retained for
roughly 6 hours even if both sources of power are removed. 1 SET
: SET
2 : ENGLISH
: SET
3 :
4 : NTSC
14 Continued 15
CORRECTING THE DATE AND TIME / CHANGING THE DATE FORMAT SELECTING THE LANGUAGE
5 DATE/TIME
2007
Correcting the date and time
1 Press “d” or “c” to select Year, Month, Day,
1 01 2
0 3
0
1 Press the “MENU/OK” button to display the
menu on the screen.
2 Press “a” or “b” to select “˜” SET-UP.
2006 Hour or Minute.
2005 3 Press “c”.
Y Y. M M . D D 7 2 4 1 2 00 2 Press “a” or “b” to correct the setting.
2004 AM
2003 3 Always press the “MENU/OK” button after the
SET-UP
settings are completed.
SET CANCEL : OFF
1 :
10
0 2 3
0 : AUTO
: OFF
2 :
●
! Holding down “a” or “b” changes the numbers continuously. SET
●
! When the time displayed passes “12”, the AM/PM setting
changes.
1
DATE/TIME
Changing the date format
2 1
0 2
0
1 Press “d” to move to page number.
Getting Ready
2 Press “a” or “b” to select “PAGE 3”.
1 Press “d” or “c” to select the date format.
D D. M M . Y Y 2 Press “a” or “b” to set the format. Refer to the
MM/DD/YY 7/24/2005 10:00 table below for details of the settings.
Y Y. M M . D D AM
3 Always press the “MENU/OK” button after the
PAGE 3
settings are completed.
SET CANCEL : SET
1 : SET
10
0 2 3
0 Date format Sample settings 2 : ENGLISH
: SET
YY.MM.DD 2005.7.24 3 :
MM/DD/YY 7/24/2005 4 : NTSC
DD.MM.YY 24.7.2005
3 01 03 2
0
1 Press “c” to move to menu item.
2 Press “a” or “b” to select “
3 Press “c”.
”.
/LANG.
1 : SET ENGLISH
: SET FRANCAIS
2 :ENGLISH DEUTSCH
3 : SET ESPAÑOL
ESPA
: ITALIANO
4 : NTSC
●
! The screens in this manual are shown in English.
●
! See P.92 for more information on the “˜” SET-UP menu.
ENGLISH
1 : SET ENGLISH
: SET FRANCAIS
2 :ENGLISH DEUTSCH
3 : SET ESPA Ñ OL
: ITALIANO
4 : NTSC
16 17
2 Using
the Camera BASIC OPERATION GUIDE
This section describes the camera’s functions.
EVF/LCD (monitor selector) button
Focus mode selector button Power switch
Pressing the “EVF/LCD” button toggles
Unlock using the Focus mode selector between the viewfinder (EVF) and the
ON/OFF and
lock switch. Press the Focus mode EVF LCD monitor. Use whichever mode is
selector button to change the focus mode. “ ” Photography mode /
“ ” Playback mode best suited to your shot.
Focus mode
selector switch
S-AF : Single AF
Use the Power switch to select the mode.
MF : Manual focus
Exposure
C-AF : Continuous AF compensation button LCD
With the “ ” button held down,
press the “d” or “c” button to
select the exposure
compensation. Zoom button
Photography: Press “T” to zoom in (telephoto).
Press “W” to zoom out (wide-angle).
Playback: Press “T” to enlarge the image.
2
18 Continued 19
BASIC OPERATION GUIDE PHOTOGRAPHY MODE TAKING PICTURES (AUTO MODE)
1 Set the Power switch to “q”.
dc button
Photography: d button
1 01 2
0 2 Set the Mode dial to “B”.
h Focal range
Turns Macro ( ) on and off.
Wide-angle: approx. 90 cm (3.0 ft.) to infinity
c button
Sets the flash ( ). Telephoto: approx. 2 m (6.6 ft.) to infinity
Playback: Change frame or movie frame advance. ●
! Use Macro mode for subjects closer than 90 cm (3.0 ft.)
(➡P.46).
●
! When [CARD ERROR], [CARD NOT INITIALIZED], [CARD
FULL] or [NO CARD] appears, see P.123.
2 01 2
0
1 Unlock the Focus mode selector lock switch.
2 Press the Focus mode selector button to set the
Focus mode to “S-AF”.
DISP/BACK button
Photo mode button
DISP: Press this button to N 12
select the screen display. Photography: Select the
S-AF S-AF
quality mode, sensitivity and
BACK: Press this button to
FinePix COLOR settings. MF
stop a procedure midway
through. Playback: Specify the print
order (DPOF) settings.
C-AF
2
Up, down, left and right are indicated by black triangles in the Owner’s Manual. Up or down is shown
as “a” or “b”, and left or right is shown as “d” or “c”.
20 Continued 21
PHOTOGRAPHY MODE TAKING PICTURES (AUTO MODE)
Brace your elbows against your sides and hold the Press the shutter button down halfway. When a
5 camera with both hands. Position your right thumb
so that it is handy for using the zoom.
9 Bebeep
short double-beep is heard, the camera focuses on
your subject. The AF frame on the screen becomes
smaller and the camera sets the shutter speed and
●
! Moving the camera while shooting gives a blurred picture
(camera shake). Use a tripod to prevent camera shake, aperture. The indicator lamp (green) changes from
particularly for shots in the dark when the selected flash blinking to lit.
mode is Suppressed flash.
●
! There may be some uneven brightness at the lower edge of
the screen. This is normal and does not affect the ●
! When a short double-beep is not heard and “{” appears on
photographed image. the screen, the camera cannot focus.
●
! Pressing the shutter button down halfway freezes the image
on the screen briefly. This image is not the recorded image.
Hold the camera so that your fingers or the strap do ●
6 not cover the lens, flash and AF-assist illuminator.
If the lens, flash or AF-assist illuminator is obscured
250 F 3.2
! When “{” appears on the screen, press again the shutter
button down halfway or try standing about 2 m (6.6 ft.) from
your subject to take the picture.
by your fingers or the strap, subjects may be out of
focus or the brightness (exposure) of your shot may Pressing the shutter button halfway when the flash
be incorrect. is not popped up, camera pops the flash up as
required by the shooting conditions.
●
! Check that the lens is clean. If it is dirty, clean the lens as
informed on P.118.
●
! If the flash is used in dusty conditions or when it is snowing,
white dots may appear in the image due to flash reflecting off
the dust particles or snowflakes. Use Suppressed flash mode
2
to fix the problem.
Zoom bar
N 12 Approx. 38 mm to 380 mm
(„: Approx. 39.5 mm to 395 mm)
Max. zoom scale: 10×
10 clicking sound is heard, the camera records the
image.
Click
●
! There is a slight delay between the shutter button being
pressed and the picture being taken. Play back the shot to
check the image.
●
! See P.95 for information on procedures for using digital
●
! When pressing the shutter button down fully in one motion,
2000 F 2 8 the camera takes the picture without the AF frame changing.
zoom.
●
! When taking a picture, the indicator lamp lights orange
(shooting disabled). The indicator lamp then turns green and
Frame the shot so that the subject fills the entire AF the next picture can be taken.
8 N 12 (Autofocus) frame.
●
! When taking a picture using flash, the image may disappear
and go dark briefly due to flash charging. The indicator lamp
blinks orange during charging.
●
! See P.123-124 for information on the warning displays.
AF frame
●
! The image shown on the screen before the picture is taken
may differ in brightness, color, etc. from the image actually
recorded. Play back the recorded image to check it (➡P.28). ◆ Subjects not suitable for autofocus ◆
●
! When the subject is not in the AF frame, use AF/AE lock to The FinePix S5200 / FinePix S5600 uses a high-precision autofocusing mechanism. However, it may
take the picture (➡P.26). have difficulty focusing on the following:
h Very shiny subjects such as a mirror or car walls or subjects dressed in the same color as
◆ Compatible filters ◆ body the background)
h Shots where another high-contrast object (not
55 mm-diameter commercial available filters can be attached. h Subjects photographed through glass
h Subjects that do not reflect well, such as hair the subject) is close to the AF frame and is
●
! Do not use more than one filter at a time. or fur either closer or further away than your subject
●
! The lens cap (included) may not be used when attaching the filter.
h Subjects with no substance, such as smoke or (such as a shot of someone against a
flames background with strongly contrasting
h Dark subjects elements)
h Fast moving subjects
h Subjects with little or no contrast between the For such subjects use AF/AE lock (➡P.26) or
subject and the background (such as white “MF” Manual focus mode (➡P.45).
22 23
PHOTOGRAPHY MODE TAKING PICTURES (AUTO MODE)
●
! The image shown on the LCD monitor before the picture is
AF frame taken may differ in brightness, color, etc. from the image ●
! See P.54 for information on changing the quality setting.
actually recorded. Play back the recorded image to check it ●
! The default quality “˘” set at shipment is “÷ N”.
(➡P.28).
●
! When the subject is not in the AF frame, use AF/AE lock to
take the picture (➡P.26). ■ Standard number of frames per xD-Picture Card
The table below shows the standard number of frames for a new xD-Picture Card formatted on the camera. The larger the
xD-Picture Card capacity, the bigger the difference between the actual number of frames and the number shown here. Also,
INDICATOR LAMP DISPLAY the size of an image file varies depending on the subject. So the number of remaining shots may decrease by 2 or may
remain the same. For this reason, the number displayed may not show the actual number of frames.
Display Status Quality setting ÷F ÷N „ 3 2 ` ~
Lit green AF/AE lock in progress, Setting video output Number of recorded pixels 2592 × 1944 2736 × 1824 2048 × 1536 1600 × 1200 640 × 480 —
Blinking green Camera shake warning or AF warning (ready to shoot) DPC-16 (16 MB) 6 12 12 19 25 122 1
Blinking green and Recording to xD-Picture Card (ready to shoot) DPC-32 (32 MB) 12 25 25 40 50 247 2
orange alternately
DPC-64 (64 MB) 25 50 51 81 101 497 5
Lit orange Recording to xD-Picture Card (not ready)
DPC-128 (128 MB) 51 102 103 162 204 997 11
Blinking orange Charging the flash (flash will not fire)
DPC-256 (256 MB) 102 204 207 325 409 1997 23
Blinking red i xD-Picture Card Warnings
DPC-512/M512 (512 MB) 205 409 414 651 818 3993 46
No card inserted, card not formatted, incorrect format, card full and xD-Picture Card error
i Lens operation error DPC-M1GB (1 GB) 412 819 830 1305 1639 7995 92
✽ Detailed warning messages appear on the screen (➡P.123-124).
24 25
PHOTOGRAPHY MODE TAKING PICTURES (AUTO MODE)
BEST FRAMING
The framing guideline display consists of horizontal
N 12 and vertical lines that divide the image on the
screen into 9 frames.
◆ Important ◆
2
Press the shutter button down halfway (AF/AE
3
26 27
PLAYBACK MODE VIEWING THE IMAGES (w PLAYBACK)
1
0 2
0 Single-frame playback
1 Set the Power switch to “w”.
1 Text displayed
Sorting by date
In Playback mode, press the “DISP/BACK” button
2 Press “c” to scan forward through the images. No text displayed to change the display shown on the screen. Press
Press “d” to scan backwards. the “DISP/BACK” button until the sorting by date
Multi-frame playback screen appears.
Sorting by date
●
! Set the Power switch to “w” to play back the last shot. ●
! Large number of images may take longer to appear.
1/9
1 Press “a”, “b”, “d” or “c” to move the cursor To select the date:
1
0 2
0 (colored frame) to the selecting frame. Press “a”
or “b” repeatedly to jump to the next page.
4 01 2
0 1 Press “a”, “b”, “d” or “c” to move the cursor
(colored frame) to “b” on the upper left frame.
2 Press the “MENU/OK” button to enlarge the 2 Press “d” to display the selecting date.
image.
2005
7/17
7/23
7/24
28 Continued 29
PLAYBACK MODE VIEWING THE IMAGES (w PLAYBACK)
5 01 2
0
1 Press “a” or “b” to move the cursor (colored
frame) to select the date. Pressing “a” or “b”
repeatedly changes to the next page.
Playback zoom
Press the “T” or “W” button during single-frame
2 Press “c” to return to “b”. playback to zoom the image. A zoom bar appears
on the screen.
2005
7/17
7/23
7/24
Zoom bar
4
●
! Playback zoom cannot be used with multi-frame playback.
2005
2
1/4
●
! Press the “DISP/BACK” button to cancel playback zoom.
30 31
PLAYBACK MODE ERASING IMAGE (ERASE FRAME) Memo
Set the Power switch to “w”.
1
100-0001
ERASE OK?
OK CANSEL
SET
32 33
PHOTOGRAPHY FUNCTIONS
3 Advanced
Features PHOTOGRAPHY FUNCTIONS FOCUSING (DISTANCE) EXPOSURE (SHUTTER SPEED AND APERTURE)
The distance from the subject to the camera is referred to as the shooting distance. Exposure refers to the light that hits the CCD or the total amount of captured light and determines
When the shooting distance is set correctly and the image appears sharp, the image is focused. the brightness of the image.
The exposure is determined by the combination of aperture and shutter speed. In AE (automatic
■ Three focusing methods exposure), the camera determines the correct exposure, allowing for factors such as the brightness
The mechanisms for focusing are S-AF (Single AF), C-AF (Continuous AF) and MF (Manual of the subject and the sensitivity setting.
focus).
S-AF: Use S-AF for normal photography. In this mode, the camera focuses each time the shutter The graph at left shows the way the aperture and shutter speed settings can
be changed while maintaining the same exposure level.
button is pressed down halfway. Select the AF mode (➡P.63) when the Mode dial is set to
Closed
h When the aperture is decreased by one step, the shutter speed also
“N”, “M”, “<” or “>” mode. decreases by one step (the dot moves upper left).
C-AF: Use C-AF to photograph moving subjects. When this mode is set, the camera focuses h When the aperture is increased by one step, the shutter speed also
continuously on the subject in the center of the screen. See P.44 for details. increases by one step (the dot moves lower right).
(Ap erture)
h Combinations that result in the shutter speed or aperture being outside the
MF: The focus is set manually. See P.45 for details. available range of settings cannot be selected (white dots).
h In the “N”, “M” and “<” Photography modes, it is easy to select different
■ Causes of focusing errors and the solutions settings along this line.
h Selecting settings that run parallel to this line by adjusting the brightness of
Cause Solution the photographed image is referred to as exposure compensation.
Open
The subject is not in the AF frame. Use AF lock (focus mode: AF (CENTER)) ✽1 or MF.
The subject is not suited to AF. Use AF lock (focus mode: AF (CENTER)) ✽1 or MF. Slow (Shutter speed) Fast
The subject is outside the shooting range. Turn Macro mode on or off ✽2.
The subject is moving too quickly. Use MF (pre-setting the shooting distance for a shot )
◆ When you cannot get the correct exposure ◆
✽1 Taking pictures using AF lock Exposure compensation:
Press the shutter button down This function uses the exposure level set by the AE
halfway to focus. function as a reference (0) and then brightens (+) or
darkens (–) the image. By selecting Auto bracketing,
you can shoot 3 frames, one underexposed (–), one at
the reference exposure (0) and one overexposed (+). 3
Advanced Features
(–) (0) (+)
Main subject Capture the main subject Recompose the shot and take the picture. Shutter speed
in the center of screen
When shooting a moving subject, you can either “freeze the motion” or “capture the sense of
✽2 Turning Macro mode ON/OFF movement” by adjusting the shutter speed.
Freezes the motion of the Photographs the traces left
Wide-angle: Wide-angle: Approx.10 cm (0.3 ft.)-2 m (6.6 ft.) Fast subject. Slow by the subject’s movement.
Approx. 90 cm (3.0 ft.)-infinity Telephoto: Approx.90 cm (3.0 ft.)-2 m (6.6 ft.)
Telephoto:
Approx. 2 m (6.6 ft.)-infinity
34 35
PHOTOGRAPHY FUNCTIONS
NATURAL LIGHT
PORTRAIT
LANDSCAPE
NIGHT
ANTI-BLUR
N M < >
1 Select the Photography mode (➡P.38-42).
B Specifies all settings other than the “Quality”, “Sensitivity”
B
Advanced Features
√/À/U/,// N M < >
Take the pictures (check the exposure and focus ➡ adjust Default B
˘ Quality P.54 ÷N ✓ ✓ ✓ ✓ ✓ ✓
the shot composition ➡ press the shutter button down fully). FinePix photo
û ISO P.56 — ✓ ✓✽1 ✓ ✓ ✓ ✓
mode
★ You can use the menus for more detailed settings (➡P.54-65).
ü FinePix COLOR P.57 STD ✓ ✓ ✓ ✓ ✓ ✓
Ä Self-timer P.60 OFF ✓ ✓ ✓ ✓ ✓ ✓
) MULTI P.61 — — ✓ ✓ ✓ ✓
The table below provides a number of sample settings. Use the settings effectively. H )
_ SPOT P.61 — — ✓ ✓ ✓ ✓
Photometry MULTI
To achieve this result Sample settings + AVERAGE P.61 — — ✓ ✓ ✓ ✓
To express the motion of the subject Set the Mode dial to “M” and select a slow shutter speed. Use a » White balance P.61 AUTO — — ✓ ✓ ✓ ✓
tripod to prevent camera shake. Photography
â High-speed shooting P.63 OFF ✓ ✓ ✓ ✓ ✓ ✓
menu
To freeze the subject's movement Set the Mode dial to “M” and select a fast shutter speed. Ï CENTER P.63 ✓ ✓ ✓ ✓ ✓ ✓
To make the subject stand out by having the background Set the Mode dial to “<” and select a wide aperture setting. Ï
H AF mode ˝ MULTI P.63 — — ✓ ✓ ✓ ✓
out of focus CENTER
Ë AREA P.64 — — ✓ ✓ ✓ ✓
To get a very large depth of focus Set the Mode dial to “<” and select a narrow aperture setting.
Use a tripod to prevent camera shake because shutter speed G Sharpness P.65 STD — — ✓ ✓ ✓ ✓
decreases. Á Bracketing P.65 ±1/3EV — — ✓ ✓ ✓ ✓
To prevent the image from having a red or blue cast Change the “White balance” setting in the photography menu. ✽1 “√” Anti-blur and “À” Natural light can be selected in only the “AUTO” mode.
due to the light source ✽ MULTI, AREA and Continuous AF (C-AF) cannot be used together.
To prevent missing snapshot opportunities Take pictures in AUTO mode (see “Using the Camera”).
Shoot with HIGH-SPEED SHOOTING.
To prevent the subject from being overexposed or Use exposure compensation. When shutter speed and aperture adjustments alone do not give the correct exposure.
underexposed and to show the substance and textures Select (+) if the background is pale and (–) if the background is
of the subject clearly dark. When the image is too bright When the image is too dark
Lower the “û” sensitivity setting. Raise the “û” sensitivity setting.
Use an ND filter (sold separately). Use flash.
36 37
PHOTOGRAPHY FUNCTIONS SELECTING PHOTOGRAPHY MODE PHOTOGRAPHY FUNCTIONS N PROGRAMMED AUTO
B AUTO Set the Mode dial to “N”.
This is an automatic mode to specify the settings
Set the Mode dial to “B”. except for the shutter speed and aperture setting.
This is the easiest mode to use and can be used This is a simple way to take pictures the same as
for most types of shots. the Shutter-priority Auto and Aperture-priority Auto
modes (Program shift).
●
! See P.37 for information on available flashes.
Program shift
SCENE POSITION Press “a” or “b” to select different shutter speed
and aperture setting combinations without changing
Set the Mode dial to “√”, “À”, “U”, “,” or “/” the exposure setting. The shutter speed and
mode. aperture setting appear in yellow when the camera
This mode provides the best Scene position setting N 12
ISO 200 is in Program shift mode.
for the scene being shot.
●
! Set to “v” Suppressed flash mode when using Program shift.
●
! Any of the following cancels Program shift:
“U”, “,” and “/” cannot be selected Macro mode. i Changing the Mode dial setting
250 F 3.2 i Setting the camera to Playback mode
i Turning the camera off
Scene position settings Explanation Available flash modes
◆ The shutter speed and aperture setting display ◆
3
Using this mode selects a fast shutter speed that reduces
√ Anti-blur camera shake and moving-subject blurring. AUTO / b / d / v
When the brightness of the subject is outside the
N 12
This mode produces beautiful images that retain the ISO 200 camera’s brightness metering range, “---” appears as
Advanced Features
natural ambience when shots are taken in low-light the shutter speed and aperture setting on the screen.
conditions. This mode is also ideal for situations where the
flash cannot be used.
À Natural light Sample uses:
Flash not available
• Portraits of sleeping children, pets and birthday cakes ---- F ---
• Candlelit services (weddings, etc.) and school concerts
• Restaurants, aquariums, museums and churches ---- F ---
Used for photography getting beautiful skin tones and soft AUTO / b / d / v / c /
U Portrait overall tone. n
Used for shooting scenery in daylight and provides crisp,
, Landscape clear shots of scenery such as buildings and mountains.
Flash not available
●
! In Anti-blur or Natural light mode, when you have been used for long periods in places subject to extreme
temperature rises, it will lower your image quality and streaking may also be visible in your images. If this occurs,
turn the camera off several times to prevent heating the camera. Setting High-speed shooting mode to “OFF” is
effective.
38 39
PHOTOGRAPHY FUNCTIONS M SHUTTER-PRIORITY AUTO PHOTOGRAPHY FUNCTIONS < APERTURE-PRIORITY AUTO
Set the Mode dial to “M”. Set the Mode dial to “<”.
This is an automatic mode to set the shutter speed. This is an automatic mode to set the aperture.
Use this mode to freeze a moving subject (fast Use this mode to have the area in front of and
shutter speed) or convey the impression of behind the subject out of focus (large aperture) or
movement (slow shutter speed). have both near and far subjects in focus (small
aperture).
◆ The shutter speed and aperture setting display ◆ ◆ The shutter speed and aperture setting display ◆
Overexposed N 12
ISO 200
In scenes that are extremely overexposed, the
aperture setting (F8) appears in red. When this
Overexposed N 12
ISO 200
In scenes that are extremely overexposed, the
shutter speed setting (1/1000 sec.) appears in red.
3
Advanced Features
occurs, select a faster shutter speed (up to 1/1000 When this occurs, select a larger number of aperture
sec.). (up to F8).
Underexposed In scenes that are extremely underexposed, the Underexposed In scenes that are extremely underexposed, the
N 12 N 12
ISO 200 aperture setting (F3.2) appears in red. When this ISO 200 shutter speed setting appears in red. When this
occurs, select a slower shutter speed (down to 3 occurs, select a smaller number of aperture.
sec.).
Metering failed When the brightness of the subject is outside the Metering failed When the brightness of the subject is outside the
N 12 N 12
ISO 200 camera’s brightness metering range, “F---” appears ISO 200 camera’s brightness metering range, “----” appears
as the aperture setting. When this occurs, press the as the shutter speed setting. When this occurs, press
shutter button down halfway to measure the light the shutter button down halfway to measure the light
level again and display a value. level again and display a value.
250 F --- ---- F 3.2
250 F --- ---- F 3.2
40 41
PHOTOGRAPHY FUNCTIONS
Available Photography modes:
PHOTOGRAPHY FUNCTIONS > MANUAL D EXPOSURE COMPENSATION N, M, <
Set the Mode dial to “>”. Use this function for shots to get the correct brightness (exposure), such as shots with extremely
Use Manual mode to set any shutter speed and high contrast between the subject and the background.
aperture setting.
Set the Power switch to “q”.
1
●
! See P.130 for information on EVs.
●
! Use a tripod to prevent camera shake.
Shutter speed ●
! In shots with long exposures, noise (dots) may appear on the
image.
250 F 3.2 ●
! If the shutter speed is set to a speed faster than 1/1000 sec.,
the image may appear dark even if the flash is used. 1 Hold down “D” button.
Advanced Features
2 Press “a” or “b” to select the aperture. turns blue after setting is completed.
N 12
h Aperture settings ISO 200 h Compensation range
N 12 F3.2 to F8 in 1/3 EV increments –2 EV to +2 EV (13 steps in 1/3 EV increments)
ISO 200 Exposure
compensation ●
! Exposure compensation cannot be used in the “B”, “√”,
indicator “À”, “U”, “,”, “/”, “>” and “r” modes.
●
! The screen brightness will increase or decrease depending
Aperture
250 F 3.2 on the exposure compensation setting.
●
! The following disables exposure compensation:
Shooting dark scenes in Forced flash “ d ” or Red-eye
250 F 3.2 reduction mode “b”
42 43
PHOTOGRAPHY FUNCTIONS PHOTOGRAPHY FUNCTIONS
Available Photography modes: Available Photography modes:
CONTINUOUS AF B, √, À, U, ,, /, N, M, <, > MANUAL FOCUS B, √, À, U, ,, /, N, M, <, >
Use this button to take pictures of a moving subject. Using Continuous AF mode reduces the time To set the focus manually, use this function after adjusting the focus automatically with “S-AF” auto
required for focusing. focus mode.
1 Set the Power switch to “q”. 1 Set the Power switch to “q”.
1 01 2
0 2 Set the Mode dial to Photography mode. 1 01 2
0 2 Set the Mode dial to Photography mode.
2 01 2
0
1 Unlock the Focus mode selector lock switch.
2 Press the Focus mode selector button to set the
Focus mode to “C-AF”.
2 01 20
0 3
1 Unlock the Focus mode selector lock switch.
2 Press the Focus mode selector button to set the
Focus mode to “S-AF”, focus on the subject and
Lock the Focus mode selector lock switch to press the shutter button halfway. The camera is
prevent the switch from moving. then focused on the subject.
N 12 N 12 3 Press the Focus mode selector button to set the
C-AF MF ISO 200 Focus mode to “MF”. The focusing position is
C-AF MF locked on the subject (➡P.34).
S-AF C-AF
MF S-AF
2000 F 2 8 250 F 3.2 ●
! If the subject moves or the zoom setting is changed, repeat
the procedure from step 2.
3
Frame the shot so that the subject fills the entire AF
Advanced Features
1 Hold down the “D” button.
3 N 12 frame. The camera continues to focus on the main
subject in the AF frame.
3 01 2
0 2 Press the “T” or “W” button to adjust the focus.
44 45
PHOTOGRAPHY FUNCTIONS PHOTOGRAPHY FUNCTIONS
Available Photography modes: Available Photography modes:
e MACRO (CLOSE-UP) B, √, À, N, M, <, > d FLASH PHOTOGRAPHY B, √, U, /, N, M, <, >
Select Macro mode to take close-up shots. Choose from 6 flash modes according to the type of shot.
1 01 2
0 1 Set the Power switch to “q”.
1 Set the Power switch to “q”.
2 Set the Mode dial to “B”, “√”, “À”, “N”,
“M”, “<” or “>”. 1 01 2
0 2 Set the Mode dial to “B ”, “√ ”, “U ”, “/ ”,
“N”, “M”, “<” or “>”.
h Focal range
Wide-angle: approx. 10 cm to 2 m
(3.9 in. to 6.6 ft.)
Telephoto: approx. 90 cm to 2 m
(3.0 ft. to 6.6 ft.)
h Effective flash range
Approx. 30 cm to 2 m (1.0 ft. to 6.6 ft.)
The flash setting changes each time you press the
Advanced Features
and go dark briefly due to flash charging. The indicator lamp
blinks orange during charging.
●
! The available flash modes are limited depending on the
Photography menu selected (➡P.37).
●
! The flash fires several times (pre-flashes and the main flash).
When pressing the shutter button down halfway,
“∑” appears on the screen before the flash fires.
46 47
Available Photography modes:
PHOTOGRAPHY FUNCTIONS d FLASH PHOTOGRAPHY B, √, U, /, N, M, <, >
◆ Red-eye effect ◆
When using the flash to take a picture of people in low-light conditions, their eyes sometimes
appear red in the picture. This is caused by the light of the flash reflecting off the inside of the eye.
Use Red-eye reduction flash to minimize the likelihood of this effect.
Take the following measures to make Red-eye reduction more effective:
h Get the subjects to look at the camera. h Get as close as possible to the subjects.
3
d Forced flash
Advanced Features
Use this mode in backlit scenes, such as a subject against
a window or in the shade of a tree, or to get the correct
colors when taking a picture under bright lighting. In this
mode, the flash fires in bright as well as dark conditions.
v Suppressed flash
Use this mode for taking pictures using indoor lighting, for
shots taken through glass, and for photography in places
such as theaters or at indoor sporting events where the
distance is too great for the flash to be effective. When you
use Suppressed flash, the selected white balance function
(➡P.61) operates so that natural colors are captured along
with the ambience of the available light.
●
! Use a tripod to prevent camera shake when shooting in Suppressed
flash mode in the dark condition.
●
! See P.123 for information on the camera shake warning.
48 49
PHOTOGRAPHY FUNCTIONS f CONTINUOUS SHOOTING
Set the Power switch to “q”.
1 f Top 3-frame continuous shooting
Available Photography modes: B, √, À, U, ,, /, N, M, <, >
This mode shoots up to 3 frames (max. 2
STORING frames/sec.). When taking the pictures, the images
appear and are recorded.
●
! Top 3-frame continuous shooting cannot be used in the “r”
Movie mode.
1 Hold down the “f” button. ●
2 1
0 2
0 2 Press “d ” or “c ” to select the Continuous
shooting mode.
! The maximum file recording time using the continuous
shooting is 5 seconds when recording in xD-Picture Card.
Release the “f” button to confirm your selection. j Auto bracketing Available Photography modes: N, M, <, >
This mode shoots the same image with different
N 12 STORING exposure settings. Bracketing shoots 3 continuous
ISO 200 frames, each with a different exposure setting.
A B A is correctly exposed, B is overexposed and C
OFF is underexposed.
The settings (exposure range) can be changed in
C the photography menu.
250 F 3.2
h Auto bracketing settings (3)
±1/3 EV, ±2/3 EV, ±1 EV
When setting the Continuous shooting mode ●
! If
3 N 12
ISO 200
(except for “OFF”), the selected mode appears on
the screen.
the underexposed or overexposed frame is outside the
camera’s control range, the picture is not taken with the
specified setting increments. 3
●
! Auto bracketing cannot be used in “B”, “√”, “À”, “U”,
Advanced Features
f: Top 3-frame continuous shooting “,”, “/” or “r” mode.
j: Auto bracketing
k: Final 3-frame continuous shooting BRACKETING
Changing the setting (exposure range)
250 F 3.2 h: Long-period continuous shooting : STD
Press the “MENU/OK” button to display the menu
1 : 1 3 EV 1 3 EV and change the setting in the “Á” BRACKETING
2 3 EV menu option (➡P.65).
1 EV
◆ Notes on using the Continuous shooting modes ◆ 2
h Shooting continues as long as holding the shutter button down. In auto bracketing mode however,
just press the shutter button once to shoot 3 frames.
h If there is limited space on the xD-Picture Card, as many frames as can be recorded on the
available space are shot. When auto bracketing, if there is insufficient space on the xD-Picture Card
to record 3 frames, no pictures are taken. k Final 3-frame continuous shooting
h The focus is determined in the first frame and cannot be changed in mid-sequence (excluding Long- Available Photography modes: B, √, À, U, ,, /, N, M, <, >
period continuous shooting).
h The exposure is determined in the first frame, however, in Long-period continuous shooting the This mode allows you to release the shutter up to
Max. 40 shots
exposure is adjusted for the scene being shot. 40 times (max. 2 frames/sec.) and record the last 3
Press shutter Release shutter
h The speed of continuous shooting varies depending on the shutter speed. button button frames. If you take your finger off the shutter button
h The speed of continuous shooting does not change with the quality setting. before 40 shots have been taken, the camera
h The flash cannot be used as the flash mode is set to Suppressed flash. records the final 3 frames shot before you released
h For top 3-frame continuous shooting, final 3-frame continuous shooting and pictures taken using auto the shutter button.
bracketing, the results are always displayed after you shoot.
3 frames If there is insufficient space on the xD-Picture
Card, the camera records as many of the shots
taken just before the shutter button was released
as will fit on the xD-Picture Card.
●
! Final 3-frame continuous shooting cannot be used in the “r”
Movie mode.
●
! Only 1 frame can be shot when using the Final 3-frame
50 continuous shooting mode and Self-timer mode together. 51
PHOTOGRAPHY FUNCTIONS Available Photography modes: B, √,
PHOTOGRAPHY FUNCTIONS f CONTINUOUS SHOOTING fi INCREASING MONITOR BRIGHTNESS À, U, ,, /, N, M, <, >
This is useful when checking the shot composition for dimly lit scenes (Slow synchro shots, etc.).
h Long-period continuous shooting
Available Photography modes: B, √, À, U, ,, / Set the Power switch to “q”.
N 12
This mode allows you to take up to 40 continuous
shots (max. 0.9 frames/sec.).
1
●
! Long-period continuous shooting cannot be used in the “N”,
“M” , “<”, “>” and “r” modes.
●
! Only 1 frame can be shot when using the Long-period
continuous shooting mode and Self-timer mode together.
Set the Mode dial to Photography mode.
◆ Focusing on a moving subject ◆ 2
If you press the shutter button down halfway to focus on the subject at the starting point A, the subject
may no longer be in focus when it reaches point B where you want to take the shot.
In such situations, focus on point B beforehand and then lock the focus so that it does not shift.
This feature is also useful for photographing fast-moving subjects that are difficult to focus on.
Focus on and the focus is wrong at . Focus on and lock the focus.
N 12
Press the “fi” button again.
This function is automatically canceled after each
3
Advanced Features
shot.
●
! When this function is active, it will increase the amount of
speckling in images on the screen. This is normal and does
FAR NEAR UP not affect the photographed image.
●
! This function is purely for checking the composition of your
shot. It does not increase the brightness of the image.
●
! Even if you increase the brightness in low-light conditions,
you cannot check the subject.
●
! The color tones may vary depending on the subjects.
52 53
p PHOTO MODE PHOTOGRAPHY
Advanced Features
3 01 2
0 1 Press “a” or “b” to change the setting.
2 Press the “MENU/OK” button to confirm the
setting.
2592x1944: 12 FRAMES
: N F
: AUTO N
: STD
●
! The numbers to the upper right of setting show the number of
available frames.
●
! When changing the quality setting, the number of available
frames also changes (➡P.25).
54 55
p PHOTO MODE PHOTOGRAPHY û SENSITIVITY p PHOTO MODE PHOTOGRAPHY ü FinePix COLOR
1 Set the Power switch to “q”. 1 Set the Power switch to “q”.
1 01 2
0 2 Set the Mode dial to Photography mode.
3 Press the “p” button to display the menu on the
1 01 2
0 2 Set the Mode dial to Photography mode.
3 Press the “p” button to display the menu on the
screen. screen.
●
! In “r ” Movie mode, do not set the “ü ” FinePix COLOR
3
0 ●
! In “r” Movie mode, do not set the “û” (sensitivity) setting. 3
0 setting.
Sensitivity is retained even when the camera is off The FinePix COLOR setting is retained even when
or the mode setting is changed. the camera is off or the mode setting is changed.
1 Press “a” or “b” to select “û” (sensitivity). 1 Press “a” or “b” to select “ü” FinePix COLOR.
2 01 2
0 2 Press “c”. 2 01 2
0 2 Press “c”.
ISO COLOR
: N 1600 : N
: AUTO 800 : AUTO
: 400 : STD STD
200
100
64
AUTO
3
Advanced Features
3 01 2
0
1 Press “a” or “b” to change the setting.
2 Press the “MENU/OK” button to confirm the
setting.
3 01 2
0
1 Press “a” or “b” to change the setting.
2 Press the “MENU/OK” button to confirm the
setting.
h Settings
AUTO /64/100/200/400/800/1600
AUTO ●
! Although higher sensitivity settings will allow you to take STANDARD ●
! p-CHROME may have little visible effect with some subjects,
pictures in darker locations, they will also increase the such as close-up shots of people (portraits).
: :
N
: AUTO
1600
800 amount of speckling in your images. Streaking may also be : AUTO
N ●
! Because the effects on the image differ depending on the
visible in shots of scenes such as the night sky. : STD scene being shot in p-CHROME mode, take pictures in p-
: 400 STD
Choose the sensitivity setting that best suits the conditions. STANDARD mode as well as this mode. Note that you may
200
100 ●
! When selecting “√ ” Anti-blur or “À ” Natural light, only not be able to see any difference on the screen.
64 “AUTO” can be selected in the “û” (sensitivity) setting. ●
! For shots taken in p -CHROME mode or p -B&W mode,
AUTO ●
! When selecting “ N ”, “ M ”,“ < ” or “ > ”, AUTO cannot be automatic quality adjustment will be suppressed on Exif Print
selected in the “û” (sensitivity) setting. compliant printers.
When selecting AUTO as the sensitivity setting, the p-STANDARD The contrast and color saturation are set to standard. Use this mode for normal photography.
camera selects the best sensitivity setting for the The contrast and color saturation are set to high. This feature is effective for taking more vivid
subject’s brightness. p-CHROME
shots of subjects such as scenery (blue sky and greenery) and flowers.
p-B&W This setting converts the colors in the photographed image to black and white.
When the sensitivity is set to “64”, “100”, “200”,
4 N 12 “400”, “800” or “1600”, the selected sensitivity When setting p -CHROME or p -B&W, the icon
ISO 200
setting appears on the screen.
4 N 12 appears on the screen.
p-CHROME: ù
p-B&W: ñ
250 F 3.2
56 57
PHOTOGRAPHY MENU SETTING PHOTOGRAPHY MENU
1 01 2
0
1 Press the “MENU/OK” button to display the
menu on the screen.
Changing the page number
Press the “MENU/OK” button to display the menu
2 Press “a” or “b” to select the menu item.
1 on the screen.
SELF-TIMER
: OFF
1 :
2
: AUTO
: OFF
:
OFF
2 01 2
0
1 Press “d” to move to page number.
2 Press “a” or “b” to select the page.
: SET
●
! When the top or bottom of the menu item is selected, press
“a” or “b” to change the page.
PAGE 2
2 Press “c”.
1
: STD
: 1 3 EV
OFF
: OFF
1
2
:
: AUTO
: OFF
OFF 3 01 2
0
1 Press “c” to move to menu item.
2 Press “a” or “b” to select the menu item.
:
: SET 3
Advanced Features
SHARPNESS
3 01 2
0
1 Press “a” or “b” to change the setting.
2 Press the “MENU/OK” button to confirm the
setting.
1
: STD
: 1 3 EV
HARD
STD
SOFT
2
10 SEC
:
1 : Ä Self-timer ➡P.60 H AF mode ➡P.63
: AUTO OFF
: OFF Use this setting for taking pictures such as Set the focusing method.
2 : group shots where the photographer is included
: SET in the shot.
Advanced Features
The advantage of this mode is that the exposure tends not to change for different compositions or
subjects. This mode is particularly effective for shots of people wearing black or white clothing and
●
! The AF/AE lock can be used (➡P.26). shots of scenery.
2
0 3
0 ●
! Take care not to stand in front of the lens when pressing the
Bebeep Beep
shutter button as this can prevent the correct focus or
brightness (exposure) from being achieved.
●
! The amount of light emitted by AF-assist illuminator » WHITE BALANCE (SELECTING THE LIGHT SOURCE)
decreases when taking pictures using self-timer. Available Photography modes: N, M, <, >
Change the white balance setting to suit for the
The self-timer lamp lights and then starts blinking
3 until the picture is taken.
■ Self-timer lamp display
WHITE BALLANCE
1
: OFF
:
AUTO
surroundings and lighting.
In AUTO mode, the correct white balance may not
be achieved for subjects such as close-ups of
: AUTO
* Lit for 5 seconds ➡ Blinking for 5 seconds : OFF people’s faces and pictures taken under a special
2 : light source. Select the correct white balance for
( Blinking for 2 seconds
: SET the light source. See P.130 for more information on
●
! To stop the self-timer, once it has started running, press the the white balance.
“DISP/BACK” button.
AUTO: Automatic adjustment 9: Shooting under “Daylight” fluorescent
A countdown appears on the screen indicating the (shooting to show the ambience of lamps
4 9 time remaining until the picture is taken.
Self-timer mode is canceled after each shot.
the light source)
≥: Custom white balance
0: Shooting under “Warm White” fluorescent
lamps
6: Shooting outdoors in good weather -: Shooting under “Cool White” fluorescent
7: Shooting in shade lamps
8: Shooting in incandescent light
✽ When the flash fires, the white balance setting (excluding custom white balance) for the flash is used. Consequently,
to achieve a particular effect, the flash mode should be set to Suppressed flash (➡P.48).
●
! The color tones may vary depending on the shooting conditions (light source, etc.).
60 Continued 61
PHOTOGRAPHY MENU PHOTOGRAPHY MENU ✽ Displaying the menus (➡P.58)
1 01 : OFF AUTO
CUSTOM Custom white balance
Use this setting to set the white balance for the
â HIGH-SPEED SHOOTING
Available Photography modes: B, √, À, U, ,, /, N, M, <, >
1 : ambient natural or artificial lighting in images. Use
: AUTO
High-speed shooting mode reduces the time
this setting to achieve special effects also. HIGH-SPEED SHOOTING
: ON required for focusing when pressing the shutter
2 : 1 Select “≥” custom white balance. : OFF button down halfway.
: SET 2 Press the “MENU/OK” button. 1 :
: AUTO h Focal range
: ON ON
2 : Wide-angle: approx. 2 m (6.6 ft.) to infinity
OFF
: SET
2
0 Telephoto: approx. 4 m (13.1 ft.) to infinity
N 12
●
! When this function is active, higher sensitivity settings will
increase the amount of speckling in your images. This is
normal and does not affect the photographed image.
Hold a piece of white paper under the light source ●
2 CUSTOM WB for setting the white balance, so that it fills the
entire screen. Then press the shutter button to set
! When taking pictures while the High-speed shooting mode is
set to “ON”, the batteries will run down more quickly.
Advanced Features
The AF mode can only be selected when the focus
mode is S-AF (➡P.21).
When the correct exposure is measured,
3 COMPLETED! “COMPLETED !” appears.
Press the “MENU/OK” button to confirm the setting.
N 12 Ï CENTER
ISO 200 The camera focuses on the center of the screen.
●
! The specified custom white balance is retained until it is Use this setting when taking pictures using AF/AE
reset. This setting is retained even if the batteries are lock (➡P.26).
SET CANCEL removed.
●
! Adjust the custom white balance again when changing the
sensitivity setting.
●
! After taking the picture, check the color (white balance) 250 F 3.2
setting for the image.
i Set “IMAGE DISP.” to “1.5 SEC”, “3 SEC” or “CONT” in the
“SET-UP” menu (➡P.93).
i Set the Power switch to “w” (➡P.28). N 12 ˝ MULTI
ISO 200
Press the shutter button down halfway. The camera
When [OVER] or [UNDER] appears, the white recognizes any strongly contrasting subject near
N 12 balance was not measured at the correct exposure. the center of the screen and displays the AF frame
ISO 200
Set the exposure compensation again, using a over the subject in focus.
negative value (–) when [OVER] appears and a 250 F 3.2
OVER
positive value (+) when [UNDER] appears.
OVER or UNDER
---- F ---
250 F 3.2 ●
! When taking pictures in Macro mode, the camera focuses on
the center of the screen.
◆ Example ◆
You can change the white balance for a photographed image by using colored paper instead of white
paper.
62 Continued 63
PHOTOGRAPHY MENU PHOTOGRAPHY MENU ✽ Displaying the menus (➡P.58)
1 Ë AREA
The camera changes the focusing position on the
1
2
: 1 3 EV 1 3 EV
2 3 EV
1 EV
exposed while the remaining two are underexposed
and overexposed respectively by a set amount.
screen. Use this setting when composing the shot h Bracketing settings (3)
using a tripod and changing the focusing position. ±1/3 EV, ±2/3 EV, ±1 EV
Press “a”, “b”, “d” or “c” to move the “°” (target See P.130 for more information on EVs.
SELECT AF AREA
Before moving
point) to the focusing position. ●
! Ifthe underexposed or overexposed frame is outside the
camera’s control range, the picture is not taken with the
3
Advanced Features
specified setting increments.
●
! Flash photography cannot be used.
●
! This feature always takes 3 shots. However, if there is
insufficient space on the xD-Picture Card for 3 shots, no
After moving picture will be taken.
2 N 12
ISO 200
target point was moved.
Take the picture in the normal way.
After setting the exposure for bracketing:
1 Hold down the “f” button.
2 Press “d” or “c” to select “Á”.
To reposition the AF frame, select “AREA” from the
“H” AF mode. N 12
ISO 200
250 F 3.2
OFF
Regardless of the AF frame location, the exposure is always set using the area in the center of the
screen. To expose the shot for your main subject, use AF/AE lock. 250 F 3.2
64 65
PLAYBACK FUNCTIONS PLAYBACK INFORMATION PLAYBACK MENU Ò ERASING SINGLE / ALL FRAMES
Use this function to check the photography 1 Set the Power switch to “w”.
information. Hold down the “D” button to check the
information.
1 01 2 Press the “MENU/OK” button to display the
menu on the screen.
●
! This function cannot be used during multi-frame playback
(➡P.28). 2
0
Flash Histogram
: -1 1 3
White balance
7/24/2005 10:00 AM
Exposure compensation ERASE
setting
FRAME
1 ALL FRAMES
Highlight warning: When the image is overexposed,
100-0001 areas where white blooming has occurred flash 2
N
ISO 200
1/250 3.2
: STD
black.
Highlight warning
3
Advanced Features
: OFF
: AUTO
: -1 1 3
7/24/2005 10:00 AM
3 01 2
0
1 Press “a” or “b” to select “FRAME” or “ALL
FRAMES”.
2 Press the “MENU/OK” button.
◆ Histograms ◆
A histogram is a chart showing the distribution of brightness in an image (horizontal axis: brightness;
vertical axis: pixels). ERASE FRAME
FRAME
1 Optimal exposure: There is an ample distribution of pixels overall with a peak in the middle range. Erases only the selected frame (file).
FRAME
2 Overexposed: The number of highlight pixels is high with the distribution sloping upwards to the 1 ALL FRAMES
right. ALL FRAMES
3 Underexposed: The number of shadow pixels is high with the distribution sloping upwards to the 2
left. Erases all unprotected frames (files).
Back up important frames (files) onto your PC or
another media.
Pixels
“DPOF SPECIFIED. ERASE OK ?” appears when erasing a frame (file) with DPOF setting.
Brightness
Shadows Highlights
●
! The shape of the graph will vary depending on the subject.
66 Continued 67
PLAYBACK MENU Ò ERASING SINGLE / ALL FRAMES PLAYBACK MENU Ú IMAGE ROTATE
Use this mode to rotate an image photographed
ERASE OK?
FRAME
1 Press “d” or “c” to select the erasing frame
1 01 with FinePix S5200 / FinePix S5600.
1 Set the Power switch to “w”.
(file). 2 Press the “MENU/OK” button to display the
2 Press the “MENU/OK” button to erase the menu on the screen.
currently displayed frame (file).
To erase another frame (file), repeat steps 1 and
YES CANCEL
2. 2
0
When erasing frames (files) is completed, press the
1
0 2
0 “DISP/BACK” button.
●
! Pressing the “MENU/OK” button repeatedly erases
consecutive frames (files). Take care not to erase a frame
(file) by mistake.
●
! Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (➡P.76).
1 Press “a” or “b” to select “Ú” IMAGE ROTATE.
IT MAY TAKE A WHILE Pressing the “MENU/OK” button erases all the
frames (files).
IMAGE ROTATE
●
! When [PROTECTED FRAME] appears, unprotect the frame 3
(➡P.76).
Advanced Features
●
! Protected frames (files) cannot be erased. Unprotect the
frames (files) before erasing them (➡P.76).
CANCEL
●
! Even if you stop the procedure immediately, some frames
(files) will be erased.
SET CANCEL ●
! An image can be rotated when playing back using FinePix
S5200 / FinePix S5600 and FinePixViewer (included).
68 69
p PHOTO MODE PLAYBACK
¸ HOW TO SPECIFY PRINT OPTIONS (DPOF) p PHOTO MODE PLAYBACK ¸ SPECIFYING DPOF SETTINGS EASILY
DPOF stands for Digital Print Order Format and refers to a format that is used for 1 Set the Power switch to “w”.
recording printing specifications for images shot using a digital camera on media such as
an xD-Picture Card. The recorded specifications include information on which frames
1 01 2
0 2 Press the “p” button.
“WITH DATE” is selected at factory default
are to be printed. setting. See P.73 for information on selecting
This section gives a detailed description of how to order your prints with the FinePix “WITH DATE” or “WITHOUT DATE”.
S5200 / FinePix S5600.
✽ Some printers do not support date and time imprinting or specification of the number of
prints.
✽ The warnings shown below may appear while specifying the prints.
Press the “p” button.
3 01 2
0
1 Press “d” or “c” to display the frame (file) for
specifying DPOF settings.
2 Press “a” or “b” to set a value up to 99 as the
3
Advanced Features
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
PRINT ORDER (DPOF) set the number of prints to 0 (zero).
DPOF :00000 To specify more DPOF settings, repeat steps 1
and 2.
●
! Prints of up to 999 frames (files) can be ordered on the same
xD-Picture Card.
00 SHEETS ●
! DPOF settings cannot be specified for movie and CCD-RAW.
FRAME SET ●
! Images photographed with a camera other than FinePix
S5200 / FinePix S5600 may not be specified DPOF settings.
YES NO ●
! Press the “DISP/BACK” button to leave the previous
settings unchanged.
70 Continued 71
p PHOTO MODE PLAYBACK ¸ SPECIFYING DPOF SETTINGS EASILY PLAYBACK MENU ¸ DPOF SET FRAME
Always press the “MENU/OK” button after the 1 Set the Power switch to “w”.
4 settings are completed.
Pressing the “DISP/BACK” button cancels those
1 01 2 Press the “MENU/OK” button to display the
menu on the screen.
settings.
01 SHEETS
FRAME SET
Total number of prints appears on the screen. 1 Press “a” or “b” to select “¸” PRINT ORDER
5 Press the “p” button. 2 01 2
0 (DPOF).
2 Press “c”.
100-0009
PRINT ORDER (DPOF) Total number of prints PRINT ORDER (DPOF)
TOTAL : 9SHEETS
1
WITH DATE
DPOF SETTING HAS BEEN 2 WITHOUT DATE
COMPLETED.
COMPLETED
RESET ALL
7/24/2005 10:00 AM 3
Advanced Features
“ u ” appears on the screen during playback
when the image has specified DPOF settings.
◆ Canceling DPOF setting ◆
To cancel the DPOF setting for a specified frame (file):
1Press “d” or “c” to select the frame (file) with the DPOF setting you want to cancel.
2Set the number of prints to 0 (zero).
To cancel the DPOF setting for another frame (file), repeat steps 1 and 2.
3 01 2
0
1 Press “a ” or “b ” to select “WITH DATE” or
“WITHOUT DATE”. Selecting “WITH DATE” will
cause the date to be imprinted on your prints.
Press the “MENU/OK” button to complete the settings. 2 Press the “MENU/OK” button.
h DPOF ALL RESET (➡P.75).
WITH DATE
1
WITH DATE
WITHOUT DATE
2 RESET ALL ●
! When selecting the “WITH DATE” setting, the date is
imprinted on your shots using the Print Service or a DPOF-
compatible printer (depending on the printer specifications,
the date may not be printed in some cases).
72 Continued 73
PLAYBACK MENU ¸ DPOF SET FRAME PLAYBACK MENU ¸ DPOF ALL RESET
1 Set the Power switch to “w”.
4 01 2
0
1 Press “d” or “c” to display the frame (file) for
specifying DPOF settings.
2 Press “a” or “b” to set a value up to 99 as the
1 01 2
0 2 Press the “MENU/OK” button to display the
menu on the screen.
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
PRINT ORDER (DPOF) set the number of prints to 0 (zero).
DPOF :00000 To specify more DPOF settings, repeat steps 1
and 2.
●
! Prints of up to 999 frames (files) can be ordered on the same
1 Press “a” or “b” to select “¸” PRINT ORDER
00 SHEETS
FRAME SET
●
●
xD-Picture Card.
! “T” appears on the screen when selecting “WITH DATE”.
! DPOF settings cannot be specified for movie and CCD-RAW.
●
! Images photographed with a camera other than FinePix
2 01 2
0 (DPOF).
2 Press “c”.
S5200 / FinePix S5600 may not be specified DPOF settings.
Advanced Features
Total number of prints 2 Press the “MENU/OK” button.
01 SHEETS
FRAME SET RESET ALL
1
Total number of prints appears on the screen.
6 Press the “MENU/OK” button. 2
WITH DATE
WITHOUT DATE
RESET ALL
COMPLETED
YES CANCEL
1
0 2
0
1 Press “a” or “b” to select “Ç” PROTECT.
2 1
0 2
0 2 Press “c”.
3 01 2
0
1 Press “a” or “b” to select “FRAME”, “SET ALL”
or “RESET ALL”.
2 Press the “MENU/OK” button to confirm your
3
Advanced Features
selection.
SET/RESET FRAME
FRAME RESET ALL OK?
RESET ALL
Protects or unprotects only the selected frame (file). IT MAY TAKE A WHILE Press the “MENU/OK” button to unprotect all the
1 frames (files).
SET ALL
FRAME
2 SET ALL Protects all the frames (files).
RESET ALL
YES CANCEL
RESET ALL
Removes the protection from all the frames (files).
PROTECT OK?
FRAME SET
1 Press “d” or “c” to select the protecting frame
(file).
2 Press the “MENU/OK” button to protect the ◆ To stop the procedure midway ◆
currently displayed frame (file). If the images are very large, protecting or
To protect another frame (file), repeat steps 1 and unprotecting all the frames (files) may take some
YES CANCEL time.
2. When protecting frames (files) is completed,
If you want to take a picture or record a movie during
press the “DISP/BACK” button. the procedure, press the “DISP/BACK” button. To
1
0 2
0
return to protecting or unprotecting all the frames
(files), see the procedure on P.76 and begin at step
CANCEL 1.
76 77
PLAYBACK MENU ◊ AUTOMATIC PLAYBACK PLAYBACK MENU Â RECORDING VOICE MEMOS
1 Set the Power switch to “w”. Voice memos of up to 30 seconds can be added to
1 01 2 Press the “MENU/OK” button to display the
menu on the screen.
1 01 still images.
h Audio recording format
WAVE (➡P.130)
PCM recording format
h Audio file size
Approx. 480 KB (for a 30-second voice memo)
2
0 2
0 1 Set the Power switch to “w”.
2 Press “d” or “c” to select the image to add a
voice memo.
2 1
0 2
0
1 Press “a” or “b” to select “◊” PLAYBACK.
2 Press “c”. 2 01 2
0
1 Press the “MENU/OK” button to display the
menu on the screen.
2 Press “a” or “b” to select “” VOICE MEMO.
Advanced Features
3 1
0 2
0
1 Press “a” or “b” to select the playback interval
and the type of image transition.
3 Press “c”.
78 Continued 79
PLAYBACK MENU Â RECORDING VOICE MEMOS PLAYBACK MENU Â PLAYING BACK VOICE MEMOS
The remaining recording time appears during 1 Set the Power switch to “w”.
5 RECORDING
Blinking red
15s recording. 1 01 2
0 2 Press “d” or “c” to select an image file that has a
voice memo.
Remaining time
REC RE-REC ●
! To end your comment during recording, press the “MENU/OK”
button. ●
! Voice memos cannot be played back using multi-frame
28s playback. Press the “DISP/BACK” button to select single-
frame playback.
After 30 seconds of recording, “FINISH” appears on
6 FINISH the screen.
To finish
PLAY “t” appears on the screen when an image file with
a voice memo is selected.
Press the “MENU/OK” button.
To re-record your comment
REC RE-REC
Press the “DISP/BACK” button.
2 01 1 Press “b” to play the voice memo.
2 The playback time appears on the screen along
with a progress bar.
●
! When the sound is difficult to hear, adjust the volume (➡P.82,
93).
2
0 15s
Take care not to block
Bar the speaker.
Advanced Features
RE-REC whether to re-record the voice memo.
1
2
●
! When [PROTECTED FRAME] appears, unprotect the ■ Playing back voice memos
frame(➡P.76). Control Description
Stops playback.
✽ Press “d” or “c” while voice memo playback is stopped to
Stop
go back to the previous file or advance to the next file
respectively.
80 Continued 81
PLAYBACK MENU Â PLAYING BACK VOICE MEMOS PLAYBACK MENU ¯ TRIMMING
1 Set the Power switch to “w”.
Adjusting volume of voice memos
Volume can be adjusted while playing back voice memos. Adjust the volume to suit your condition.
1 01 2
0 2 Press “d” or “c” to select the trimming frame
(file).
Press the “MENU/OK” button while playing back
1 voice memo. The voice memo is paused during
playback.
0 1 2 3 4 5 6 8 9 10
7
2 01 2
0
1 Press the “MENU/OK” button to display the
menu on the screen.
2 Press “a” or “b” to select “¯” TRIMMING.
1 SET
0 1 2 3 4 6 7 8 9 10
5
3 Press “c”.
3
Advanced Features
SET CANCEL TRIMMING
1 SET
Press the “MENU/OK” button to confirm the new
3 setting. Camera starts to play back the voice
memo.
2
TRIMMING
●
! Press the “DISP/BACK” button to return to single-frame
playback.
Zoom bar
A saved image size varies depending on the zoom
scale. For 0.3M, the “fl YES” option appears in
YES CANCEL yellow.
82 Continued 83
PLAYBACK MENU ¯ TRIMMING MOVIE MODE r RECORDING MOVIES
Set the Mode dial to “r”.
5 01 2
0
1 Press “a”, “b”, “d” or “c” to display another
part of the image.
The current displayed image appears on the
1 Use “r” Movie mode to record movies with sound.
h Specifications
navigation screen. Motion JPEG (➡P.130) with monaural sound
2 Press the “MENU/OK” button to trim the image. h Quality selection method
TRIMMING % (640 × 480 pixels)
$ (320 × 240 pixels)
h Frame rate (➡P.130)
30 frames per second (fixed)
Navigation screen ●
! See P.87 for information on changing the quality mode.
●
! Because a movie is recorded onto the xD-Picture Card as it is saved, it cannot be recorded correctly if the camera
YES CANCEL ●
! Press the “DISP/BACK” button to return to single-frame suddenly loses power (if you open the battery cover or slot cover, or disconnect the AC power adapter).
playback.
It may not be possible to playback your movies on other cameras.
Check the saved image size and press the
6 REC OK? “MENU/OK” button. The trimmed image is added
The available recording time and “STANDBY”
as a separate file in the final frame.
■ Image sizes
2 STANDBY 13 s appear on the screen.
Sample uses
3 Printing at up to 6R (15.2 × 20.3 cm) / A5 size
REC CANCEL
2 Printing at up to 4R (10.2 × 15.2 cm) / A6 size ●
! Because sound is recorded concurrently with the images,
` To use for e-mail or web site make sure that you do not cover the microphone with a
finger, etc. (➡P.8).
Advanced Features
cannot zoom during recording.
◆ Images that can be trimmed ◆ h Optical zoom focal length
You may not be able to trim images that were shot with a camera other than the FinePix S5200 / (35 mm camera equivalent)
FinePix S5600. STANDBY 13 s Approx. 38 mm to 380 mm
Max. zoom scale: 10×
Zoom bar
h Focal range
Wide-angle: approx. 90 cm (3.0 ft.) to infinity
Telephoto: approx. 2 m (6.6 ft.) to infinity
84 Continued 85
MOVIE MODE r RECORDING MOVIES p PHOTO MODE MOVIE ˘ QUALITY SETTINGS IN MOVIE MODE
Press the shutter button down fully to start 1 Set the Mode dial to “r”.
4 recording. 1 01 2
0 2 Press the “p” button to display the menu on the
screen.
●
! The brightness and color of the screen shown during movie ●
! In “r” Movie mode, do not set the “û” (sensitivity) setting.
recording may differ from those shown before recording
●
! In “r” Movie mode, do not set the “ü” FinePix COLOR
setting.
begins.
●
! There is no need to hold down the shutter button. The quality setting is retained even when the
● Camera operation noises may be recorded during movie
!
shooting. camera is off or the mode setting is changed.
of the screen. :
●
! Ifthe brightness of the subject changes during movie
recording, the sound of lens operation may be recorded.
REC ●
! Some wind noise may be recorded in shots taken outdoors.
●
! When the remaining time runs out, recording ends and the
movie is saved onto the xD-Picture Card.
6
Press the shutter button down halfway during
recording, the recoding ends.
3 01 2
0
1 Press “a” or “b” to change the setting.
2 Press the “MENU/OK” button to confirm the
3
Advanced Features
setting.
640 x 480: 13 s
●
! If recording is stopped immediately after it begins, 1 second
of the movie is recorded onto the xD-Picture Card. :
86 87
PLAYBACK MODE PLAYING BACK MOVIES
1 Set the Power switch to “w”.
1 01 2
0 2 Press “d” or “c” to select the movie file.
Adjusting volume of movies
Volume can be adjusted while playing back movies. Adjust the volume to suit your condition.
Press the “MENU/OK” button while playing back
1 movie. The movie is paused during playback.
●
! Movies cannot be played back using multi-frame playback.
Press the “DISP/BACK” button to select single-frame 0 1 2 3 4 5 6 8 9 10
playback. 7
PLAY
Indicated by the “r” icon.
2
0 6s
2 Press “d” or “c” to adjust the volume.
Bar
●
! Take care not to block the speaker.
●
! When the sound is difficult to hear, adjust the volume (➡P.89, 0 1 2 3 4 6 7 8 9 10
5
3
93).
●
! If the subject of the shot is very bright, white vertical streaks
STOP PAUSE or black horizontal streaks may appear in the image during
playback. This is normal.
Advanced Features
■ Playing back movies SET CANCEL
Control Description
Stops playback.
Stop ✽ Press “d” or “c” while playback is stopped to go back to the
previous file or advance to the next file respectively.
1 on the screen.
“c” for “ã” PLAYBACK VOLUME, “ê” LCD
BRIGHTNESS, “ ï ” FORMAT, “ ì ”
DATE/TIME, “ ó ” TIME DIFFERENCE, “ ö ”
DSC BACKGROUND COLOR, “W” DISCHARGE or
“ú” RESET.
SELF-TIMER : SET 2 After you have changed the settings, press the
1 : SET
2 : ENGLISH “MENU/OK” button to confirm the changes.
OFF
1 : : SET
3 :
: AUTO OFF
: OFF 4 : NTSC
2 :
: SET
SET-UP
: OFF
1 :
: AUTO
: OFF
2 :
SET
3 01 2
0
1 Press “d” to move to page number.
2 Press “a” or “b” to select the page. 4
Settings
PAGE 3
: SET
1 : SET
2 : ENGLISH
3 : SET
:
4 : NTSC
4 01 2
0
1 Press “c” to move to menu item.
2 Press “a” or “b” to select the menu item.
USB MODE
: SET
1 : SET
2 : ENGLISH
3 : SET
:
4 : NTSC
90 91
SET-UP ✽ How to use the SET-UP menu (➡P.90)
Settings
DIFFERENCE
92 ●
! Always turn the camera off when replacing the batteries. Opening the battery cover or disconnecting the AC power adapter 93
without turning the camera off may cause the camera settings to revert to the factory default values set at shipment.
SET-UP ✽ How to use the SET-UP menu (➡P.90)
Settings
photographed on other cameras.
Use the bundled RAW FILE CONVERTER LE software to perform the processing on a PC.
●
! When [FRAME NO. FULL] appears, see P.123. Conversion using RAW FILE CONVERTER LE also provides a simple way to create TIFF-format
images.
✽ To rebuild images, FinePixViewer (on the bundled CD-ROM) must be installed on your PC.
ê ADJUSTING SCREEN BRIGHTNESS
To adjust screen brightness:
1 Press “d ” or “c ” to adjust the screen
■ The functions listed below cannot be used in CCD-RAW mode.
-5 4 3 2 1 1 2 3 4 5+
0
brightness. During shooting Digital zoom, Continuous shooting and Quality are unavailable.
2 Press the “MENU/OK” button to confirm the new
setting. During playback Playback can be zoomed up to 2.5×, but cropped images cannot be saved.
SET CANCEL
1
0 2
0
94 95
SET-UP ✽ How to use the SET-UP menu (➡P.90)
SET CANCEL
2 TIME DIFFERENCE
TIME DIFFERENCE
1 Press “d”.
2 Press “a” or “b” to select “TIME DIFFERENCE”.
ï FORMAT LOCATION:
Initialize (format) the xD-Picture Card for use with TIME DIFFERENCE SET
FORMAT the camera.
FORMAT OK? Because initializing the xD-Picture Card erases all SET CANCEL
ERASE ALL DATA the frames (files), including protected frames (files).
OK CANCEL
Back up important frames (files) onto your PC or 1
0 2
0
another media.
SET
1 Press “d” or “c” to select “OK”.
2 Pressing the “MENU/OK” button erases all the
4
Settings
frames (files) and initializes the xD-Picture
1
0 2
0 Card.
●
! When [CARD ERROR], [WRITE ERROR], [READ ERROR]
or [CARD NOT INITIALIZED] appears, see P.123 for
information before formatting the xD-Picture Card.
3 Press “c”.
TIME DIFFERENCE
TIME DIFFERENCE
LOCATION:
TIME DIFFERENCE SET
SET CANCEL
96 Continued 97
SET-UP ✽ How to use the SET-UP menu (➡P.90) 5 Software
Installation 5.1 INSTALLATION ON A Windows PC
4 TIME DIFFERENCE
7/24/2005 10:00 AM
7/24/2005 10:00 AM
1 Press “d” or “c” to select +, –, hour and minute.
2 Press “a” or “b” to correct the setting.
Pre-installation checklist
To run this software, you must have the hardware and software described below. Check your
h Available time setting system before you begin the installation.
–23:45 to +23:45 (in 15-minute increments)
00 : 00 Operating System✽1 Windows 98 (including the Second Edition)
Windows Millennium Edition (Windows Me)
Windows 2000 Professional✽2
SET CANCEL Windows XP Home Edition✽2
Windows XP Professional✽2
1
0 2
0 CPU 200 MHz Pentium or better recommended (800 MHz Pentium III or better
recommended for Windows XP)
RAM 64 MB minimum (128 MB minimum for Windows XP), Minimum 256 MB
when RAW FILE CONVERTER LE is used
Hard disk space Amount required for installation: 450 MB minimum
Amount required for operation: 600 MB minimum
Always press the “MENU/OK” button after the (When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
5 settings are completed. Minimum 2 GB when RAW FILE CONVERTER LE is used (must
specified in the OS as virtual memory or paging files)
Display 800 × 600 pixels or better, 16-bit color or better
(When using ImageMixer VCD2 LE for FinePix: 1024 × 768 or better)
Internet connection✽3 i To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
i Connection speed: 56 k or better recommended
✽1 Models with one of the above operating systems pre-installed.
✽2 When you install the software, login using a system administrator account (e.g. “Administrator”).
✽3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
When the Photography mode is selected with world
6 N 12 time set, “ß” appears on the screen for 3 seconds
and the date turns yellow.
connection.
◆ Notes ◆
i Connect the camera directly to the PC using the USB cable (mini-B). The software may not operate
correctly when you use an extension cable or connect the camera via a USB hub.
7/24/2005 11:00 AM i When your PC has more than one USB port, the camera can be connected to either port.
Upon returning from a trip, always change the
i Push the USB connector fully into the socket to ensure that it is securely connected. The software
World time setting back to “å” HOME.
may not operate correctly if the connection is faulty.
i Additional USB interface board is not guaranteed.
i Windows 95 and Windows NT cannot be used.
i Operation is not guaranteed on home-built PCs or on PCs running updated operating system
software.
i When you reinstall or remove FinePixViewer, the Internet menu and your user ID and password for
the FinePix Internet Service are deleted from your PC. Click the [Register now] button, enter your
registered user ID and password and download the menu again.
5
Software Installation
98 99
5.1 INSTALLATION ON A Windows PC 5.2 INSTALLATION ON A Mac OS X
Do not connect the camera to your PC until the software installation is completed. Pre-installation checklist
Install FinePixViewer as instructed in the Quick start guide. ■ Hardware and software requirements
1 To run this software, you must have the hardware and software described below. Check your
system before you begin the installation.
◆ Launching the installer manually ◆ Compatible Mac Power Macintosh G3 ✽1, PowerBook G3 ✽1,
Power Macintosh G4, iMac, iBook,
1 Double-click the “My Computer” icon.
Power Macintosh G4 Cube, or PowerBook G4, Power Macintosh G5
✽ Windows XP users should click “My Computer” in the “Start” menu.
2 Right-click “FINEPIX” (CD-ROM drive) in the “My Computer” window and select “Open”. Operating System Mac OS X (compatible with version 10.2.8 to 10.3.9)✽2
3 Double-click “SETUP” or “SETUP.exe” in the CD-ROM window. RAM 192 MB minimum
Minimum 256 MB when RAW FILE CONVERTER LE is used
Hard disk space Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
(When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
Minimum 2 GB when RAW FILE CONVERTER LE is used (required on
✽ The way file names are displayed differs as described below depending on your PC settings. the system disk)
i File extensions (3-letter suffixes indicating the file type) may be shown or hidden. (e.g. Setup.exe or Setup) Display 800 × 600 pixels or better, at least 32,000 colors
i Text may be shown normally or all in uppercase (e.g. Setup or SETUP). (When using ImageMixer VCD2 LE for FinePix: 1024 × 768 or better)
Internet connection✽3 i To use the FinePix Internet Service or mail attachment function
An Internet connection or e-mail transmission software is needed
◆ Installing other applications ◆ i Connection speed: 56 k or better recommended
You may see messages for installing ImageMixer VCD2 LE for FinePix. Install this application as ✽1 Models with a USB port as a standard feature
directed by the on-screen instructions. ✽2 This software does not support QuickTime 7.
✽3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
Install DirectX as directed by the on-screen instructions and then restart your PC. If the latest
2 version of DirectX is already installed on your PC, this installation is not performed. ◆ Notes ◆
●
! If the latest version is already installed, this window does not appear. i Connect the camera directly to the Macintosh using the USB cable (mini-B). The software may not
●
! Do not remove the CD-ROM during this procedure. operate correctly if you use an extension cable or connect the camera via a USB hub.
i Push the USB connector fully into the socket to ensure that it is securely connected. The software
After restarting, the USB Video Class Driver would may not operate correctly if the connection is faulty.
3 be installed.
i Additional USB interface board is not guaranteed.
i On Macintosh PCs, allocate at least 400 MB of virtual memory when RAW FILE CONVERTER LE is
●
! If the latest version is already installed, this window does not used. If other applications will be used at the same time, allocate the additional amount required for
appear. those applications also.
●
! The driver is only installed on Windows XP SP1.
4
After restarting the PC, a message appears stating “Installation of the FinePixViewer has been
completed”.
5
Software Installation
100 101
5.2 INSTALLATION ON A Mac OS X
Turn your Macintosh on and start up Mac OS X. Do not launch any other applications. The “FinePixInstallOSX” window appears.
1 8 Click the [Install] button to install FinePixViewer and RAW FILE CONVERTER LE.
The “FinePixViewer installation completed” message dialog appears. Then click exit button and
10 close it.
●
! When Safari is used as the Web browser, a message may be displayed and the CD-ROM may not be removed. If
this happens, click the Safari icon in the Dock to make Safari the active application and then select “Quit Safari” in
the “Safari” menu to shut down Safari.
The “License” dialog appears. Read the agreement carefully and then, if you agree to the terms
5
6 13
Select “Other...” from “When a camera is connected, open”.
Software Installation
of the Agreement, click the [Accept] button.
7
The “Read me” dialog appears. Click the [Continue] button.
14 the “Applications” folder and click the [Open] button.
Viewing Images
normally.
To terminals
●
! When connecting the A/V cable to TV, the camera’s screen is
turned off.
Audio (white) ●
! Refer to the instructions provided with your TV for more
information on audio/video input for your TV.
●
! The image quality for movie playback is lower than for still
images.
CANCEL
YES CANCEL ●
! The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
! Please connect the AC Power Adapter AC-5VX (sold
AC-5VX separately) to your camera.
(Sold separately) ●
! Use an xD-Picture Card that was formatted on FinePix
S5200 / FinePix S5600.
●
! Press the “DISP/BACK” button to cancel the printing. ●
! If the menu does not appear, check whether the “ò” USB
Depending on the printer, the printing may not be canceled MODE setting is “®” PICTBRIDGE.
immediately or printing may stop midway through. When ●
! Depending on the printer, some functions are disabled.
CANCEL printing stops midway, briefly turn the camera off and then on
again.
4 01 2
0
1 Press “a” or “b” to select “PRINT WITH DATE”
or “PRINT WITHOUT DATE”. If “PRINT WITH
DATE” is selected, the date is imprinted on your
prints.
2 Press “c”.
P ICT
CTBRI
RIDGE
GE 6
Viewing Images
PRINT
PR NT WITH
TH DATE OK
PR NT WITHOUT
PRINT OUT DATE
PRINT
PR NT DPOF
●
! “PRINT WITH DATE” is not available when the camera is
connected to a printer that does not support date printing.
5 01 02 3
0
1 Press “d” or “c” to display the frame (file) for
which you want to specify PRINT settings.
2 Press “a” or “b” to set a value up to 99 as the
6.3.1 Connecting to a PC
The “Connecting to a PC” section explains how to connect the camera to your PC using the USB
number of copies of the frame (file) to be printed. cable (mini-B) and describes the functions you can use once the camera and PC are connected.
For frames (files) that you do not want printed, If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the
set the number of prints to 0 (zero). AC power adapter when connecting the camera to a PC.
To specify more PRINT settings, repeat steps 1
TOTAL 00009
and 2. Refer to Section 5 the first time you connect the camera to your PC.
3 Always press the “MENU/OK” button after the Install the software first. Do not connect the camera to the PC before installing
01 SHEETS settings are completed. all the software.
FRAME ●
! Movies and images with CCD-RAW cannot be printed.
YES CANCEL ●
! Images photographed with a camera other than FinePix
S5200 / FinePix S5600 may not be printed. CD-ROM
(Software for FinePix CX)
“PRINT OK?” appears on the screen. Press the
6 PRINT OK?
TOTAL: 9 SHEETS
“MENU/OK” button to begin printing. ¶ DSC (Mass storage device) mode
This mode provides a simple way to read images from an xD-Picture Card and store images onto
an xD-Picture Card.
Gold marking
Printer starts printing the specified number of
7 PRINTING
1/9 SHEETS
prints.
6
USB socket camera’s screen. SET
(mini-B)
2 Turn the camera off. Unplug the USB cable
3 ●
! Use the AC Power Adapter AC-5VX (sold separately) for the
4 NTSC connection (➡P.104). If shutting off power supply during
(mini-B). communication, the files on the xD-Picture Card may be
Viewing Images
damaged.
h A removable disk icon appears and you can use Windows Macintosh
Camera operation
your PC to transfer files to and from the camera.
h When the camera and PC are exchanging data,
the self-timer lamp blinks and the indicator lamp
blinks alternately green and orange.
h “¶ DSC” appears on the screen. If the above operations do not occur, you do not have the required software programs or drivers installed
h Auto power off is disabled during USB on your PC. Complete the required PC setup procedures. Then reconnect the camera to your PC.
connection.
●
! Before replacing the xD-Picture Card, always disconnect the
camera from the PC. See P.112 for information on the Windows XP
disconnection procedure.
●
! Do not disconnect the USB cable (mini-B) when the camera 1 The “Found New Hardware” help message
is communicating with a PC. See P.112 for information on the appears in the bottom-right corner of your screen.
disconnection procedure.
This message will close when the settings are
completed. No action is required.
◆ When displaying [COMMUNICATION ERROR] ◆
If “CHECKING USB” appears and then ●
! This step is not required for subsequent connections.
CHECKING USB
[COMMUNICATION ERROR] is displayed on the
2 A new removable disk icon appears in the “My Computer” window.
PICTBRIDGE screen, “¶” (DSC mode) is not selected in “ò”
USB MODE. Disconnect the USB cable (mini-B) to FinePixViewer automatically starts up and the Save Image Wizard window (Save Image
the camera and restart the procedure from step 1. dialog box) appears. Follow the instructions provided on screen to save the images. To
proceed without saving the images, click the [Cancel] button.
Viewing Images
Proceed to “USING FinePixViewer” on P.113.
110 111
6.3 CONNECTING TO A PC 6.4 USING FinePixViewer
6.3.2 Disconnecting the camera 6.4.1 Mastering FinePixViewer
For all information on FinePixViewer functions, refer to “How to Use FinePixViewer” in the Help
1 Windows
Once the image has been saved, the window below appears (Save Image Wizard Windows).
menu for details.
To disconnect the camera, click the [Remove] button. h What is explained in “How to Use FinePixViewer”...
“How to Use FinePixViewer” covers a range of topics, including batch processing and ordering prints.
Macintosh Windows
Once the image has been saved, the window below appears. To disconnect the camera, click 1 Check that the camera is not connected to the PC.
the [OK] button. 2 Quit all currently running applications.
3 Open the “My Computer” window. Then open the “Control Panel”
and double-click on “Add/Remove Programs”.
Viewing Images
112 Continued 113
6.4 USING FinePixViewer System Expansion Options
5 When the message appears, click the [OK] button. eBy using the FinePix S5200 / FinePix S5600 together with other optional FUJIFILM products, your
Check your selection carefully since the process system can be expanded to fill a wide range of uses.
cannot be canceled once you click the [OK] button.
■ Image input / output to the PC
USB
■ Print creation
USB
Printer
FinePix S5200 /
(commercially available)
FinePix S5600 Personal Computer
Digital Camera (commercially available)
PictBridge
Digital Photo
xD-Picture Card Printer CX-550
114 115
Accessories Guide Overview of the conversion lens
eVisit the FUJIFILM web site for the latest information on camera accessories. Wide Conversion Lens WL-FX9B
http://home.fujifilm.com/products/digital/index.html
This accessory converts the focal length of your lens by 0.79 times (equal
to a 30 mm wide-angle lens) without changing its F-stop value.
h xD-Picture Card
Use the following xD-Picture Cards: h Wide conversion lens specifications
DPC-16 (16 MB)/DPC-32 (32 MB)/DPC-64 (64 MB)/DPC-128 (128 MB)/ Magnification: ×0.79
DPC-256 (256 MB)/DPC-512 (512 MB)/DPC-M512 (512 MB)/DPC-M1GB (1 GB) Lens configuration: 3 lenses in 3 groups Wide
h AC Power Adapter AC-5VX Shooting range: approx. 90 cm to infinity conversion
Dimensions: ø70 mm (2.8 in.) × L32 mm (1.3 in.) lens
Use the AC-5VX when taking pictures or play back images for long periods or when
the FinePix S5200 / FinePix S5600 is connected to a PC. Weight: approx. 185 g (6.5 oz.) Mount the Wide conversion
✽ The shape of the AC power adapter, the plug and socket outlet depend on the Accessories: lens caps (front and rear), Lens pouch lens by screwing in the
country. direction of arrow.
●
! The WL-FX9B should only be used for wide-angle shots where distortion does not occur.
h Fujifilm Rechargeable Battery 2HR-3UF Using the lens at the telephoto setting increases the amount of distortion.
The 2HR-3UF includes 2 pieces of high-capacity AA-size Ni-MH (nickel-metal ●
! The wide conversion lens and built-in flash cannot be used together.
hydride) batteries. ●
! When using the wide conversion lens, there is a possibility of ghost images✽ in shots that
are taken facing towards the sun or very strong light.
h Fujifilm Battery Charger with Battery BK-NH2 This risk can be decreased or eliminated by framing the shot so that bright light sources
(With Euro type or UK type plug) such as the sun are out of the shot as much as possible.
The BK-NH2 includes the quick battery charger BCH-NH2 and 2 Ni-MH batteries. ✽ What is ghost image?
The BCH-NH2 can charge 2 Ni-MH batteries in approx. 120 minutes. Up to 4 Ni-MH Ghost image is an effect whereby strong light shining directly into the lens causes random
batteries can be charged simultaneously. reflections within the lens that appear as circles or rings of light at different points to the
original light source.
h AC Power Adapter AC-5VH/AC-5VHS
Use the AC-5VH/AC-5VHS when taking pictures or play back images for long
periods or when the FinePix S5200 / FinePix S5600 is connected to a PC.
✽ The shape of the AC power adapter, the plug and socket outlet depend on the country.
Power Supply and Batteries h To charge Ni-MH batteries, use the quick battery
charger (sold separately). Refer to the instructions
supplied with the charger to make sure that the
charger is used correctly.
h Do not use new with used batteries. Do not use h Do not use the battery charger to charge other
Applicable Batteries batteries.
charged and discharged batteries together.
h In the camera, use AA-size alkaline or Ni-MH h Do not use different types or brands of batteries at h Note that the batteries feel warm after being
(nickel-metal hydride) rechargeable batteries. the same time. charged.
Do not use AA-size manganese or nickel-cadmium h If you do not intend to use the camera for a long h Due to the way the camera is constructed, a small
(Ni-Cd) batteries in your FinePix S5200 / FinePix period of time, remove the batteries from the amount of current is used even when the camera is
S5600 because the heat created by the batteries camera. Note if the camera is left with the batteries turned off. Note in particular that leaving Ni-MH
could damage the camera or cause it not to work. removed, the time and date settings are cleared. batteries in the camera for a long period will
h The life of alkaline batteries varies between brands. h The batteries feel warm right after being used. overdischarge the batteries and may render them
The life of batteries you purchase may be shorter Before removing the batteries, turn the camera off unusable even after recharging.
than those provided with the camera. and wait for the batteries to cool down. h Ni-MH batteries will self-discharge even when not
h Since batteries do not work well in cold weather or used, and the time for which they can be used may
locations, warm the batteries by placing them inside be shortened as a result.
Notes on the Batteries your garments before use. Batteries do not work well h Ni-MH batteries will deteriorate rapidly if
Incorrect use of the batteries could cause them to when cold. They will work again when the overdischarged (e.g. by discharging the batteries in
leak, become hot, ignite or burst. Always observe the temperature returns to normal. a flashlight). Use the "Discharging rechargeable
precautions given below. h Soil (such as fingerprints) on the battery terminals batteries" function provided in the camera to
h Do not heat the batteries or throw them into a fire. makes the batteries charge less reducing the discharge the batteries.
h Do not carry or store batteries with metal objects number of images. Carefully wipe the battery h Ni-MH batteries have a limited service life. If a
such as necklaces or hairpins. terminals with a soft dry cloth before loading. battery can only be used for a short time even after
h Do not expose the batteries to water, and keep repeated discharge-charge cycles, it may have
batteries from getting wet or stored in moist If any liquid at all leaks from the batteries, wipe reached the end of its service life.
locations. the battery compartment thoroughly and then
h Do not attempt to take apart or change the batteries, load new batteries. ■ Disposing of Batteries
including battery casings. If any battery fluid comes into contact with your When disposing of batteries, do so in accordance with
h Do not subject the batteries to strong impacts. hands or clothing, flush the area thoroughly your local waste disposal regulations.
h Do not use batteries that are leaking, deformed, with water. Note that battery fluid can cause
discolored. loss of eyesight if it gets into your eyes. If this
h Do not store batteries in warm or humid places. occurs, do not rub your eyes. Flush the fluid
h Keep the batteries out of reach of babies and small out with clean water and contact your physician
children. for treatment.
h Make sure that the battery polarity (≠ and – ) is
118 correct. 119
Power Supply and Batteries
batteries.
The “Discharging rechargeable batteries” function should not be used with
alkaline batteries as it will completely drain the battery charge.
PAGE 4
Use the “Discharging rechargeable batteries” function in the following situations:
i When the batteries only last for a short time after being charged normally 1
: OK
i When the batteries have not been used for a long period : OK
2
i When you purchase new Ni-MH batteries
Do not use the “Discharging rechargeable batteries” function while using the AC power adapter. In 3
this situation, the Ni-MH batteries will not be discharged due to the external power supply. 4
DISCHARGE
1 OK
Press the “MENU/OK” button to display the menu : OK
2 on the screen. 2
3
4
ERASE
Press the “MENU/OK” button.
1
FRAME
ALL FRAMES 6 DISCHARGE
DO NOT EXECUTE
WITH NON Ni-MH
2 RECHARGEABLE BATTERIES
●
! Do not use the procedure for discharging rechargeable
batteries with alkaline batteries.
YES CANCEL
1 Press “a” or “b” to select “˜” SET-UP.
3 01 2
0 2 Press “c”.
SET-UP
1 7 01 2
0
1 Press “d” or “c” to select “OK”.
2 Press the “MENU/OK” button.
The screen changes and discharging begins.
2 When the battery level indicator blinks red and
SET discharging ends, the camera turns off.
DISCHARGE
DISCHARGE OK?
IT MAY TAKE A WHILE
FOR DISCHARGING
OK CANCEL
SET
120 ●
! To cancel discharging, press the “DISP/BACK” button. 121
Notes on the xD-Picture Card™ Warning Displays eThe table below lists the warnings that are displayed on the screen.
■ Image Memory Card ■ Using xD-Picture Card with a PC Warning Displayed Explanation Remedy
h This Image Memory Card is a new image h When taking pictures using an xD-Picture Card that
recording media (xD-Picture Card) developed has been used on a PC, reformat the xD-Picture (Lit red) The camera batteries are low or Load new or fully charged batteries.
for digital cameras. The Image Memory Card Card using your camera for best quality. completely out of charge.
consists of a semiconductor memory (NAND- h When formatting an xD-Picture Card, a directory (Blinking red)
type flash memory) to record digital image data. (folder) is created. Image data is then recorded in
There is a strong likelihood of camera Use flash photography. However, use a tripod for
The recording process is electrically performed
and enables erasure of existing image data as
this directory.
h Do not change or delete the directory (folder) or file | shake because the shutter speed is slow. some scenes and modes.
well as re-recording of new image data. names on the xD-Picture Card because this will
The AF (autofocus) cannot work effectively. i If the image is too dark, take the picture at a
h When using a new Memory Card, or a Memory make it impossible to use the xD-Picture Card in
Card that has been formatted by a PC, be sure your camera. distance of around 2 m (6.6 ft.) from the subject.
to format the card with your digital camera h Always use the camera to erase image data on an i Use AF lock to take the picture.
before using it. xD-Picture Card. Aperture/Shutter speed display Outside the AE continuous range. The picture can be taken, but the correct
h To edit image data, copy the image data to the PC
■ Protecting Your Data and edit the copy.
(Lit red) brightness (exposure) will not be obtained.
h Images and movies may be lost or destroyed in the
following situations. Please note that FUJIFILM ■ Specifications Camera malfunction or fault. i Turn the camera on again, taking care not to
assumes no responsibility for data that is lost or Type Image memory card for digital FOCUS ERROR touch the lens.
destroyed. cameras (xD-Picture Card) i Turn the camera off and on again. If the
1. Removal of the memory card or turning the power Memory type NAND-type flash memory ZOOM ERROR message still appears, contact your FUJIFILM
off while the memory card is being accessed (i.e., Conditions for use Temperature: dealer.
during record, erase, initialization, and playback 0°C to +40°C No xD-Picture Card is inserted. Insert an xD-Picture Card.
operations). (+32°F to +104°F) NO CARD
2. Improper handling and use of the memory card by Humidity:
the user or third party. 80% max. (no condensation) i The xD-Picture Card is not formatted. i Format the xD-Picture Card on the camera.
h Save your important data to another media (i.e., MO Dimensions 25 mm × 20 mm × 2.2 mm i The xD-Picture Card contact area is i Wipe the contact area on the xD-Picture Card
disk, CD-R, hard disk, etc.). (0.98 in. × 0.79 in. × 0.09 in.) soiled. with a soft dry cloth. It may be necessary to
(W × H × D) CARD NOT INITIALIZED
■ Handling xD-Picture Card format the xD-Picture Card. If the message still
h When storing xD-Picture Cards, make sure that appears, replace the xD-Picture Card.
they are kept out of the reach of children. An xD- i Camera fault. i Contact your FUJIFILM dealer.
Picture Card could be swallowed cause suffocation.
If a child swallows an xD-Picture Card, seek i The xD-Picture Card contact area is i Wipe the contact area on the xD-Picture Card
medical attention or call emergency number right soiled. with a soft dry cloth. It may be necessary to
away. CARD ERROR i The xD-Picture Card format is incorrect. format the xD-Picture Card. If the message still
h When inserting the xD-Picture Card into the i Camera fault. appears, replace the xD-Picture Card.
camera, hold the xD-Picture Card straight as you i The xD-Picture Card is damaged. i Contact your FUJIFILM dealer.
push it in. The xD-Picture Card is full. Erase some images or use an xD-Picture Card
h Do not expose an xD-Picture Card to shock. Do not CARD FULL
that has ample free space.
apply pressure, and avoid bending.
h Do not use or store xD-Picture Card in hot and i The data could not be recorded due to i Re-insert the xD-Picture Card or turn the
humid places. an xD-Picture Card error or a camera off and then on again. If the message
h Clean the xD-Picture Card with a soft dry piece of connection error between the xD- still appears, contact your FUJIFILM dealer.
cloth when dirty. WRITE ERROR Picture Card and camera.
h When carrying or storing an xD-Picture Card, keep i The image cannot be recorded as it is i Use a new xD-Picture Card.
it in the special protective case. too large to fit in the available space on
h The xD-Picture Card will work well for long time, but the xD-Picture Card.
will sooner or later lose its ability to store and play
back images or movies. If this happens replace it The timing for recording was incorrect Use an xD-Picture Card that was formatted on
with a new xD-Picture Card. BUSY because the xD-Picture Card was the camera.
h Never remove the xD-Picture Card or turn the formatted on a PC.
camera off during data recording or erasing (xD-
Picture Card formatting) as this could be damaged The frame number has reached 999-9999. 1 Insert a formatted xD-Picture Card into the
to the xD-Picture Card. camera.
h The use of xD-Picture Cards is recommended with 2 Set “RENEW” as the FRAME NO. setting in
FinePix S5200 / FinePix S5600. FRAME NO. FULL the “˜” SET-UP menu.
The recording quality cannot be guaranteed when 3 Start taking pictures (The frame number starts
xD-Picture Cards other than those manufactured by from “100-0001”).
FUJIFILM are used. 4 Set “CONT.” as the FRAME NO. setting in the
h The xD-Picture Card may feel warm when it is “˜” SET-UP menu.
removed from the camera after taking pictures. This
is normal. i The played back file was not recorded i Images cannot be played back.
h Do not put labels on the xD-Picture Card. Peeling correctly.
labels can cause the camera not to work properly. i The xD-Picture Card contact area is i Wipe the contact area on the xD-Picture Card
soiled. with a soft dry cloth. It may be necessary to
READ ERROR format the xD-Picture Card. If the message still
appears, replace the xD-Picture Card.
i Camera fault. i Contact your FUJIFILM dealer.
i An attempt was made to play a movie or i Movies and images cannot be played back.
display an image that was not recorded
122 on this camera.
123
Warning Displays Troubleshooting eIf you think the camera is faulty, check the following once more.
124 125
Troubleshooting eIf you think the camera is faulty, check the following once more. Specifications
Troubleshooting Possible causes Solutions System
The camera does not i The camera volume is set too low. i Adjust the volume. Model Digital camera FinePix S5200 / FinePix S5600
emit any sound. i The microphone was blocked during i Take care not to block the microphone
shooting/recording. during shooting/recording.
Effective pixels 5.1 million pixels
i There is something covering the speaker i Make sure that the speaker is uncovered. CCD 1/2.5-inch Super CCD HR
during playback. Number of total pixels: 5.22 million pixels
Frame erase does not Some frames may be protected. Unprotect frames using the camera on Storage media xD-Picture Card (16/32/64/128/256/512 MB/1 GB)
erase the frame. which the protection was first applied.
File format Still image: DCF-compliant
The ERASE ALL
function does not erase Compressed: Exif ver.2.2 JPEG, DPOF-compatible
all the frames. Uncompressed: CCD-RAW (RAF)
✽ Design rule for Camera File System compliant DPOF
Screens are not A language other than English is selected in 1Press the “MENU/OK” button to display compatible
displayed in English. the “ô” setting in the “˜” SET- the menu.
UP menu (➡P.92). 2Press “a” or “b” to select “˜” SET-UP
Movie: AVI format, Motion JPEG
and press “c”. Audio: WAVE format, Monaural sound
3Press “a” or “b” to select “ô” . Number of recorded pixels Still image: 2592 × 1944 pixels/2736 × 1824 pixels („)/
4Press “c”.
2048 × 1536 pixels/1600 × 1200 pixels/640 × 480 pixels
5Press “a” or “b” several times to select
“ENGLISH”. File size See the table on P.129.
6Press the “MENU/OK” button.
Lens Fujinon 10× optical zoom lens
There is no image or i The included A/V cable was connected i After the movie playback mode is stopped, F3.2-F3.5
sound on the TV. during movie playback. connect the camera and TV correctly.
i The camera is not connected to the TV i Connect the camera and TV correctly. Focal length f=6.3 mm-63 mm
correctly. (Equivalent to approx. 38 mm-380 mm on a 35 mm camera)
i “TV” is selected as the TV input. i Set the TV input to “VIDEO”.
i The “õ” video output setting is incorrect. i Change the setting to “NTSC” or “PAL” Digital zoom Approx. 5.7×
(➡P.92). (10× optical zoom lens is used together: Max. zoom scale: 57×)
i The TV volume is turned down. i Adjust the volume.
Aperture (Wide-angle) F3.2 to F8 9 steps 1/3 EV steps
The TV image is black The “õ” video output setting is incorrect. Change the setting to “NTSC” or “PAL”
and white. (➡P.92). Focal range Normal: Wide-angle: approx. 90 cm (3.0 ft.) to infinity (In High-speed
shooting mode: approx. 2 m (6.6 ft.) to infinity)
When connecting the i The USB cable (mini-B) is not correctly i Set up the camera, and connect the USB Telephoto: approx. 2 m (6.6 ft.) to infinity (In High-speed shooting
camera to a PC, the connected to the PC or camera. cable (mini-B) correctly. mode: approx. 4 m (13.1 ft.) to infinity)
photographed image or i The PC is not turned on. i Turn the PC on.
playback image appears Macro: Wide-angle: approx. 10 cm (3.9 in.) to 2 m (6.6 ft.) (In High-speed
on the camera’s screen. shooting mode: approx. 10 cm (3.9 in.) to 2 m (6.6 ft.))
Telephoto: approx. 90 cm (1.5 ft.) to 2 m (6.6 ft.) (In High-speed
The camera no longer The camera has suffered an unforeseen Briefly remove the batteries or disconnect shooting mode: approx. 90 cm (1.5 ft.) to 2 m (6.6 ft.))
works correctly. problem. the AC power adapter. Then reload the
batteries or reconnect the AC power adapter Sensitivity AUTO/Equivalent to ISO 64/100/200/400/800/1600
and try again. If you think the camera is
faulty, contact your FUJIFILM dealer. Photometry TTL 64-zones metering Multi, Spot, Average
Nothing happens when i Camera malfunction. i Briefly remove the batteries or disconnect Exposure control Program AE (B, √, À, U, ,, /, N), Shutter-priority AE,
using the Mode dial. the AC power adapter. Then reload the Aperture-priority AE, Manual exposure
batteries or reconnect the AC power
Scene position √ (Anti-blur), À (Natural light), U (Portrait), , (Landscape), / (Night)
adapter and try again.
i The batteries have run out. i Load new or fully charged batteries. Exposure compensation –2 EV to +2 EV in 1/3 EV-step increments
Can’t print with “®” PICTBRIDGE is not selected in “ò” Select “ ® ” PICTBRIDGE in “ ò ” USB Shutter speed 15 sec. to 1/2000 sec. (depend on Exposure mode)
PictBridge. USB mode in the “˜” SET-UP menu. mode in the “˜” SET-UP menu.
Continous shooting Top 3-frame: Number of recorded frames: up to 3 frames
The camera was Perform steps 1 to 3 to remove the (Max. 2 frames/sec.)
connected to a PC camera from the PC.
when the USB mode h Windows
Final 3-frame: Number of recorded frames:
was set to “®”. 1 The “New Hardware Found” wizard or last 3 frames before releasing the shutter button
“Scanner and Camera” wizard appears. If (Max. 2 frames/sec.)
the wizard does not appear, proceed to Long-period continuous shooting mode:
step 3. Number of recorded frames: up to 40 frames.
2 Click the [Cancel] button. (Max. 0.9 frames/sec.)
3 Disconnect the camera from the PC.
Auto bracketing ± 1/3 EV, ± 2/3 EV, ± 1 EV
h Macintosh
1 The window for locating the driver Focus Mode: Single AF/Continuous AF/Manual focus
appears. If the window does not appear, AF system: TTL contrast-type, AF-assist illuminator
proceed to step 3. AF frame selection: AF (CENTER), AF (MULTI), AREA AF
2 Click the [Cancel] button.
3 Disconnect the camera from the
126 Macintosh. 127
Specifications
Playback functions Trimming, Image rotate, Automatic playback, Multi-frame playback, Camera mass (weight) Approx. 370 g/13.1 oz.
Sorting by date, Histograms (Highlight warning), Voice memo (not including accessories, batteries and xD-Picture Card)
Other functions PictBridge, Exif print, PRINT Image Matching II, Language (English, Weight for photography Approx. 470 g/16.6 oz. (including batteries and xD-Picture Card)
Francais, Deutsch, Español, Italiano, , ), Time difference, Operating conditions Temperature: 0°C to +40°C (+32°F to +104°F)
FinePix photo mode (p-mode) 80% humidity or less (no condensation)
Input/Output Terminal ■ Standard number of available frames/recording time per xD-Picture Card
The number of available frames, recording time or file size varies slightly depending on the subjects photographed. Note also
A/V OUT (Audio/Visual output) NTSC/PAL-type (with monaural sound) that the divergence between standard number of frames and the actual number of frames is greater for
xD-Picture Cards with higher capacities.
Digital input/output USB2.0 High-Speed
% $
DC input socket AC-5VX/AC-5VH/AC-5VHS (sold separately)
Quality setting ÷F ÷N „ 3 2 ` ~ (30 fps) (30 fps)
Number of recorded pixels 2592 × 1944 2736 × 1824 2048 × 1536 1600 × 1200 640 × 480 — 640 × 480 320 × 240
Image data size 2.5 MB 1.3 MB 1.3 MB 780 KB 630 KB 130 KB 11 MB – –
DPC-16 (16 MB) 6 12 12 19 25 122 1 13 sec. 26 sec.
DPC-32 (32 MB) 12 25 25 40 50 247 2 27 sec. 54 sec.
DPC-64 (64 MB) 25 50 51 81 101 497 5 55 sec. 109 sec.
DPC-128 (128 MB) 51 102 103 162 204 997 11 111 sec. 219 sec.
DPC-256 (256 MB) 102 204 207 325 409 1997 23 223 sec. 7.3 min.
DPC-512/M512 (512 MB) 205 409 414 651 818 3993 46 7.4 min. 14.6 min.
DPC-M1GB (1 GB) 412 819 830 1305 1639 7995 92 14.9 min. 29.3 min.
✽ These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting
from errors in this Owner’s Manual.
✽ The LCD monitor on your digital camera is manufactured using advanced high-precision technology. Even so, small
bright points and anomalous colors (particularly around text) may appear on the monitor. These are normal display
characteristics and do not indicate a fault with the monitor. This phenomenon will not appear on the recorded image.
✽ The operation error may be caused in a digital camera by the strong radio interference (i. e. electric fields, static
electricity, line noise, etc.).
✽ Due to the nature of the lens, the edges of images may appear distorted. This is normal.
128 129
Explanation of Terms FUJIFILM Digital Camera Worldwide Network
Deactivated batteries If you have technical questions or if you need repair service, ask the following local distributor.
Leaving an Ni-MH battery unused in storage for a long period may cause a rise in the level of substances that Please present the warranty card and your purchase receipt when you ask for repairs. Refer to the
inhibit current flow inside the battery and result in a dormant battery. A battery in this state is referred to as
warranty card for conditions of the warranty. There is a case that repair and Technical support
deactivated.
Because current flow is inhibited in a deactivated Ni-MH battery, the battery’s original level of performance cannot cannot be accepted for some models which your local distributor does not deal with.
be achieved. These lists are subject to change without notice.
EV
A number denotes Exposure Value. The EV is determined by the brightness of the subject and sensitivity (speed) NORTH AMERICA
of the film or CCD. The number is larger for bright subjects and smaller for dark subjects. As the brightness of the Canada Fuji Photo Film Canada Inc.
Technical support 600 Suffolk Court Mississauga Ontario, L5R 4G4
subject changes, a digital camera maintains the amount of light hitting the CCD at a constant level by adjusting the
TEL 1-866-818-FUJI (3854) http://www/fujihelp.ca
aperture and shutter speed. Repair service 600 Suffolk Court Mississauga Ontario, L5R 4G4
When the amount of light striking the CCD doubles, the EV increases by 1. Likewise, when the light is halved, the TEL 1-800-263-5018 FAX 1-905-755-2993 http://www/fujihelp.ca
EV decreases by 1. U.S.A. Fuji Photo Film USA
Frame rate (fps) Technical support 1100 King George Post Rd., Edison, NJ 08837
The frame rate refers to the number of images (frames) that are photographed or played back per second. For TEL 800-800-3854 FAX 732-857-3487 digitalinfo@fujifilm.com
Repair service 1100 King George Post Rd., Edison, NJ 08837
example, when 10 frames are continuously photographed in a 1-second interval, the frame rate is expressed as 10
TEL 732-857-3000 FAX 732-857-3471 njcamerarepair@fujifilm.com
fps. Hawaii Fuji Photo Film Hawaii, Inc.
For reference, TV images are displayed at 30 fps (NTSC). Technical support & 94-468 Akoki Street, Waipahu, HI. 96797
JPEG Repair service TEL 1-808-677-3854, ext. 209 FAX 1-808-677-1443 kurt_kmett@fujifilmhawaii.com
Joint Photographic Experts Group CENTRAL & SOUTH AMERICA
A file format used for compressing and saving color images. The higher the compression rate, the greater the loss Argentina Imagen e informacion S.A.
of quality in the decompressed (restored) image. Technical support & Fondo de la Legua 936 San Isidro Pcia. de Buenos Aires
Memory effect Repair service TEL +54-11-4836-1000 FAX +54-11-4836-1144 servtec@imageneinformacion.com.ar
Bolivia Reifschneider Bolivia Ltda.
If an Ni-MH battery is repeatedly charged without first being fully discharged, its performance may drop below its
Technical support & Calle H N.° 5 - Equipetrol Norte - Santa Cruz
original level. This is referred to as the “memory effect”. Repair service TEL +591 33 44 1129 FAX +591 33 45 2919 gciagral@bibosi.scz.entelnet.bo
Motion JPEG Brazil Fuji Photo Film do Brasil Ltda.
A type of AVI (Audio Video Interleave) file format that handles images and sound as a single file. Images in the file Technical support & Av. Vereador José Diniz, 3400 - Campo Belo, Sào Paulo/SP
are recorded in JPEG format. Motion JPEG can be played back by QuickTime 3.0 or later. Repair service TEL 0800-12-8600 FAX +55 11 5091-4150 camarasdigitais@fujifilm.com.br
Chile Reifschneider SA
Smear Technical support & Av. El Conquistador del Monte 5024, Huechuraba,Santiago,Chile
A phenomenon specific to CCDs whereby white streaks appear on the image when there is a very strong light Repair service TEL 02-4431500 FAX 02-4431596 ceciliacalvo@reifschneider.cl
source, such as the sun or reflected sunlight, in the photography screen. Colombia Animex de Colombia Ltda.
Technical support & Calle 44 N.° 13-43 Piso 2 Apartado 18001 - Bogotá
WAVE Repair service TEL +57 1 338-0299 FAX +57 1 288-2208 animex@etb.net.co
A standard format used on Windows systems for saving audio data. WAVE files have the “.WAV” file extension and Ecuador Espacri Cia Ltda
the data can be saved in either compressed or uncompressed format. Uncompressed recording is used on this Technical support & Bolivar 5-69 y Hermano Miguel
camera. Repair service TEL 593-72-835526 FAX 593-72-833157
WAVE files can be played back on a personal computer using the following software: Ecuador Importaciones Espacri Cia. Ltda.
Windows: MediaPlayer Technical support & Simón Bolivar 5-69 y Hno. Miguel - Cuenca
Macintosh: QuickTime Player Repair service TEL +593 783 5526 FAX +593 783 3157 portiz@fujifilm.com.ec
✽ QuickTime 3.0 or later Mexico Fujifilm de Mexico, S.A. de C.V.
Technical support Av. Ejercito Nacional 351, Col. Granada 11520 Mexico, D.F.
White Balance TEL (52-55) 5263-5566 / 68 FAX (52-55) 5254-1508 jlgiraud1@fujifilm.com.mx
Whatever the kind of the light, the human eye adapts to it so that a white object still looks white. On the other hand, Repair service Av. Presidente Juarez 2007, Col. Tepetlacalco, 54090 Tlalnepantla, Edo. de Mexico
devices such as digital cameras see a white subject as white by first adjusting the color balance to suit the color of TEL (52-55) 5263-5500 FAX (52-55) 5254-1508 jlgiraud1@fujifilm.com.mx
the ambient light around the subject. This adjustment is called matching the white balance. Paraguay Errece S.R.L.
Technical support & Edificio Unitas 15 de Agosto 1035, Asunción
Repair service TEL +595 21 444256 FAX +595 21 444651 jmarbulo@fujifilm.com.py
Peru Procesos de Color S.A.
Exif Print Format is a newly revised digital camera file format that contains a variety of shooting information for Technical support & Pablo Bermudez 111 Apartado 3794 - Esq. Arequipa - Lima 11
optimal printing. Repair service TEL +51 14 33 5563 FAX +51 14 33 7177 jalvarado@fujifilm.com.pe
Uruguay Fotocamara S.R.L.
Technical support & Cuareim 1439, montevideo, Uruguay
Repair service TEL +598-2-9002004 FAX +598-2-9008430 fotocam@adinet.com.uy
Uruguay Kiel S.A.
Technical support & Maldonado 1787 Montevideo- Uruguay
Repair service TEL (05982) 419 4542 FAX (05982) 412 0046 kiel@fujifilm.com.uy
Venezuela C. Hellmund & Cia Sa
Technical support & Av. Ppal Diego Cisneros Caracas Venezuela Edf Oficentro
Repair service TEL 0212-2022300 FAX 0212-2399796 hellmund@hellmund.com
EUROPE
Austria Fuji Film Oesterreich
Technical support & Traviatagasse/Pfarrgasse, 1230 Vienna, Austria
Repair service TEL 0043 1 6162606/51 or 52 FAX 0043 1 6162606/58 kamera.service@fujifilm.at
Belgium Belgian Fuji Agency
Technical support & 20, Avenue Lavoisier, Wavre, 1300, Belgium
130 Repair service TEL 3210242090 FAX 3210238562 info@fuji.be
131
FUJIFILM Digital Camera Worldwide Network
Croatia I&I d.o.o. Romania CTS-Cardinal Top Systems Ltd
Technical support Hondlova 2, Zagreb, Croatia Technical support & 112, Calea Dorobanti street, 4 flat, 1sector, Bucharest, Romania
TEL 38512319060 FAX 2310240 dsaravanja@fujifilm.hr Repair service TEL 4021-230-09-82 FAX 4021-230-09-82 cts_tirla@hotmail.com
Repair service Hondlova 2, Zagreb, Croatia Russia ZAO “Fujifilm RU”
TEL 38512316228 FAX 2310240 info@fujifilm.hr Technical support Bld. 1, 10, Rozanova str., Moscow, 123007, Russia
Cyprus PMS IMAGING LTD TEL +7-095-956-9858 FAX +7-095-230-6217 info@fujifilm.ru
Technical support & 11, Dighenis Akritas Avenue, P.O.BOX 22315, 1586 Nicosia Repair service 18, Shelepikhinskaya Naberezhnaya str., Moscow, 123290, Russia
Repair service TEL 35722746746 FAX 35722438209 mariosashiotis@fujifilm.com.cy TEL +7-095-797-3434 FAX +7-095-797-3434
Cyprus Doros Neophytou CAMERA REPAIRS Slovakia Fujifilm Slovakia
Technical support & 28B, Agiou Demetriou, Acropoli, Nicosia Technical support Pribylinska 2, 831 04 Bratislava, Slovakia
Repair service TEL 35722314719 FAX 35722515562 dorosn@logosnet.cy.net TEL 00421 2 44 888 077 FAX 00421 2 44 889 300 fujifilm@fujifilm.sk
Czech Republic Fujifilm Cz., s.r.o. Repair service FIS Tatracentrum, Hodzovo nam. 4 - Tatracentrum, 811 06 Bratislava, Slovakia
Technical support U nakladoveho nadrazi 2/1949, 130 00 Praha 3 TEL 00421 2 54 647 347 fis.tatracentrum@stonline.sk
TEL 00420 234 703 411 FAX 00420 234 703 489 fricman@fujifilm.cz Spain Fujifilm España S.A.
Czech Republic AWH servis Technical support Aragón 180, 08011 Barcelona (España)
Repair service Milesovska 1, 130 00 Praha 3, Czech republic TEL 902012535 FAX 934515900 / 933230330 info@fujifilm.es
TEL 00420 222 721 525 FAX 00420 222 720 122 awh@awh.cz Repair service Aragón 180, 08011 Barcelona (España)
Denmark Fujifilm Denmark A/S TEL 934511515 FAX 934515900 / 933230330 tallersat@fujifilm.es
Technical support & Stubbeled 2, 2950 Vedbæk Denmark Sweden Fujifilm Sverige AB
Repair service TEL 0045 45662244 FAX 0045 45662214 fujifilm@fujifilm.dk Technical support Sveavägen 167 104 35 Stockholm
Finland Fuji Finland Oy TEL 46 8 506 141 70 FAX 46 8 506 142 09 kamera@fujifilm.se
Technical support & Martinkyläntie 41, 01720 Vantaa, Finland Repair service Sveavägen 167 104 35 Stockholm
Repair service TEL +358 9 825951 FAX +358 9 870 3818 fuji@fuji.fi TEL 46 8 506 513 54 FAX 46 8 506513 54 kameraverkstaden@fujifilm.se
France FUJIFILM France Switzerland / Lichtenstein
Technical support & 2, Avenue Franklin, 78186 Saint-Quentin en Yvelines, France Fujifilm (Switzerland) AG
Repair service FAX 33 1 01 30 58 58 65 direction.technique@fujifilm.fr Technical support & Niederhaslistrasse 12, 8157 Dietlikon, Switzerland
Germany Fuji Photo Film (Europe) GmbH Repair service TEL +41 44 855 5154 FAX +41 44 855 5329 RepairCenter@fujifilm.ch
Technical support & Heesenstr. 70, 40549 Düsseldorf Turkey Fujifilm Turkiye Sinfo A.S.
Repair service International call TEL +49 211 50890 FAX +49 211 5089668 service@fujifilm.de Technical support Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
National call✽ TEL 0180 5898980 FAX 0180 5898982 TEL +90 212 696 5090 FAX +90 212 696 5009 csarp@fujifilm.com.tr
✽ 12 Cent/Min aus dem deutschen Festnetz Repair service Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
Greece FUJIFILM HELLAS S.A. TEL +90 212 696 5090 FAX +90 212 696 5010 servis@fujifilm.com.tr
Technical support & 1, Ihous & Ag. Anargiron str., 175 64 P.Phaliro, Athens, Greece U.K. Fuji Photo Film (UK) Ltd.
Repair service TEL 0030 210 9404100 FAX 0030 210 9404397 fujifilm@fujifilm.gr Technical support St Martins Way St Martins Business Centre Bedford MK42 0LF
Hungary Fujifilm Hungary Ltd. TEL +44 (0)123 424 5383 FAX +44 (0)123 424 5285 fujitec@fuji.co.uk
Technical support Vaci ut 19. Budapest, 1134, Hungary Repair service St Martins Way St Martins Business Centre Bedford MK42 0LF
TEL 3612389410 FAX 3612389401 fujifilm@fujifilm.hu TEL +44 (0)123 421 8388 FAX +44 (0)123 424 5285 fujitec@fuji.co.uk
Iceland Icephoto (Ljosmyndavorur) Ukraine Image Ukraine CJSC
Technical support & Skipholt 31, 105 Reykjavik, Iceland Technical support & 12, Kontraktova ploshcha, Kyiv 04070, Ukraine
Repair service TEL 354 568 0450 FAX 354 568 0455 framkollun@fujifilm.is Repair service TEL +380-44-4909075 FAX +380-44-4909076 d@fujifilm.ua
Italy FujiFilm Italia S.p.A.
Technical support Via Dell’Unione Europea, 4 - 20097 San Donato Milanese (MI), Italy
MIDDLE EAST
TEL 039-02895821 FAX 039-0289582912 info@fujifilm.it Iran Tehran Fuka Co.
Repair service Fujifilm On Line - Call center Technical support & 229,“Fuji” Bldg., Mirdamad Blvd., Tehran 19189, Iran
TEL 039-026695272 info@fujifilm.it Repair service TEL (+98-21)2254810-19 FAX (+98-21)2221002 fuka@neda.net
Lithuania Fujifilm Lithuania Israel Shimone Group Ltd.
Technical support & Gerosios Vilties str. 38, LT-03143 Vilnius, Lithuania Technical support Efal 33 keyriat Arie Petah Tikva 49130, Israel
Repair service TEL 370-5-2130121 FAX 3705-5-2134066 info@fujifilm.lt TEL (+ ) 972 3 9250666 digital@fujifilm.co.il
Malta Ciancio (1913) Co.Ltd. Repair service Efal 33 keyriat Arie Petah Tikva 49130, Israel
Technical support & Fuji Tech Centre, Ciancio House, Cannon Road, Qormi, QRM05 TEL (+ ) 972 3 9250666 FAX 972 3 9250699 khaim@shimone.com
Repair service TEL 0356-21-480500 FAX 0356-21-488328 info@fujifilm.com.mt Jordan Grand Stores
Netherlands Fujifilm Nederland BV Technical support & Al- Abdali, Amman / Jordan
Technical support Hoogstraat 39, 3011 PE, Rotterdam, The Netherlands Repair service TEL 009626-4646387 FAX 009626-4647542 gstores@go.com.jo
TEL 010-2812345 FAX 010-2812334 fuji@fujifilm.nl Qatar Techno Blue
Repair service Hoevenseweg 43, 4877 LA, Etten-Leur, The Netherlands Technical support Blue Salon Bldg, 3rd Floor, Suhaim bin Hamad st, Al- Saad, Doha
TEL 010-2812345 FAX 076-7502641 reparatie@fujifilm.nl TEL 00974 44 66 175 FAX 00974 44 79 053 prabu@techno-blue.com
Norway Fujifilm Norge AS Saudi Arabia Emam Distribution Co. Ltd.
Technical support Lilleakerveien 10, 0283 Oslo, Norway Technical support P.O. Box 1716, Jeddah 21441, Saudi Arabia
TEL 0047-22736000 FAX 0047-22736020 www.fujiifilm.no/ mailto:post@fujifilm.no TEL 96626978756 FAX 96626917036 service@fujifilm.com.sa
Repair service Liaveien 1, 5132 Nyborg, Norway Syria Film Trading Company
TEL 0047-55393880 FAX 0047-55195201 www.camera.no/mailto:service@camera.no Technical support Al-Shahbandar P.O. Box:31180 Damascus SYRIA
Poland Fujifilm Polska Distribution Sp. z o.o. TEL + 963 11 2218049 FAX + 963 11 44673456 f.t.c@Net.SY
Technical support Poland Al..Jerozolimskie 178; 02-486 Warszawa Repair service Al-cheikh Taha P.O. Box: 6171 Aleppo SYRIA
TEL +48-22-517-66-00 FAX +48-22-517-66-02 fujifilm@fujifilm.pl TEL + 963 21 4641903 FAX + 963 21 4641907 filmtradin@Net.SY
Repair service Poland, Muszkieterow 15, 02-273 Warszawa U.A.E. Grand Stores
TEL +48-22-886-94-40 FAX +48-22-886-94-42 serwis@fujifilm.pl Technical support & P. O. Box 2144, Saleh Bin Lahej Building, Al Garhoud, Deira, Dubai
Portugal Fujifilm Portugal, Lda Repair service TEL + 971-4-2823700 FAX + 971-4-2828382 photography@grandstores.ae
Technical support Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal Yemen Al-Haidary Trading
TEL (351) 226194200 FAX (351) 226194213 finepix@fujifilm.pt Technical support P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
Repair service Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal TEL 00967-1-503980 FAX 00967-1-503983
TEL (351) 226194200 FAX (351) 225194662 cameras@fujifilm.pt Repair service P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503977 FAX 00967-1-503983
132 133
FUJIFILM Digital Camera Worldwide Network Safety Notes
AFRICA h Make sure that you use your FinePix S5200 /
Egypt Foto Express Egypt FinePix S5600 camera correctly. Read these Safety WARNING
Technical support & 426 Pyramids St., Giza, Egypt Notes and your Owner’s Manual carefully before If a problem arises, turn the camera
Repair service TEL (202) 7762062 FAX (202) 7760169 fotoegypt@access.com.eg use. off, remove the batteries, disconnect
Kenya Fuji Kenya Ltd h After reading these Safety Notes, store them in a and unplug the AC power adapter.
Repair service P.O.Box 41669-00100, Fuji Plaza, Chiromo Road, Nairobi, Kenya. safe place. Continued use of the camera when it is
TEL (254-20)4446265-8 FAX (254-20)4448515 / 7 info@fujifilm.co.ke emitting smoke, is emitting any unusual
About the Icons odor, or is in any other abnormal state Unplug from
OCEANIA can cause a fire or electric shock. power socket.
Australia FUJIFILM Australia Pty Ltd
The icons shown below are used in this document to
indicate the severity of the injury or damage that can h Contact your FUJIFILM dealer.
Technical support 114 Old Pittwater Road, Brookvale, NSW, 2100, Australia
TEL 1800 226 355 FAX +61 (2) 9938 1975 digital@fujifilm.com.au result if the information indicated by the icon is ignored Do not allow water or foreign objects
Repair service 114 Joynton Avenue, Zetland, NSW, 2017, Australia and the product is used incorrectly as a result. to enter the camera.
TEL 1800 226 355 FAX +61 (2) 9938 1975 digital@fujifilm.com.au If water or foreign objects get inside the
Fiji Brijlal & Co. Ltd This icon indicates that death camera, turn the camera off, remove
Technical support & 70-72 Cumming Street,Suva,Fiji WARNING or serious injury can result if the batteries and disconnect and
Repair service TEL (679)3304133 FAX (679)3302777 kapadia@connect.com.fj the information is ignored. unplug the AC power adapter.
New Caledonia Phocidis SARL Continued use of the camera can cause
Technical support & 58, rue Higginson - B.P.661 - 98845 This icon indicates that a fire or electric shock.
Repair service TEL (00 687) 25-46-35 FAX (00 687) 28-66-70 phocidis@phocidis.nc personal injury or material h Contact your FUJIFILM dealer.
New Zealand Fujifilm NZ Ltd CAUTION damage can result if the
Technical support & Cnr William Pickering & Bush Road Albany, Auckland Do not use the camera in the
Repair service TEL +64-9-4140400 FAX +64-9-4140410 glenn.beaumont@fujifilm.co.nz
information is ignored. bathroom or shower.
Papua New Guinea Oceania PNG Limited This can cause a fire or electric shock.
The icons shown below are used to indicate the nature Do not use in the
Technical support Section 15, Allotment 1, Reke St, Boroko NCD. PNG. Mail: PO Box 2167, Boroko NCD. PNG. bathroom or shower.
TEL +675 3256411 FAX +675 3250311 oceania@daltron.com.pg of the information which is to be observed.
Never attempt to change or take
ASIA Triangular icons tell you that this apart the camera. (Never open the
Hong Kong Fuji Photo Products Co., Ltd.
information requires attention (“important”). casing.)
Technical support & 8/F.,TSUEN WAN IND. CENTRE, 220 TEXACO RD., TSUEN WAN, HONG KONG Circular icons with a diagonal bar tell you Do not use the camera when it has
Repair service TEL (852)2406 3287 FAX (852)2408 3130 rsd@chinahkphoto.com.hk been dropped or the casing is
that the action indicated is prohibited
Indonesia PT Modern Photo Tbk damaged. Do not
(“Prohibited”). disassemble.
Technical support & Jl.Matraman Raya 12, Jakarta Timur 13150 This can cause a fire or electric shock.
Repair service TEL +62 021 2801000 FAX +62 021 8581620+62 021 2801012 kmr-srv@moderngroup.co.id Filled circles with an exclamation mark tell h Contact your FUJIFILM dealer.
Malaysia Fuji Photo Film (Malaysia) Sdn. Bhd. you an action that must be performed
Technical support Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling Jaya, (“Required”). Do not change, heat or unduly twist
or pull the connection cord and do
Selangor Darul Ehsan, Malaysia
not place heavy objects on the
TEL 603-79584700 FAX 603-79584110 digital@fujifilm.com.my
connection cord.
Repair service Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling Jaya,
Selangor Darul Ehsan, Malaysia These actions could damage the cord
TEL 603-79584700 FAX 603-79584110 technical@fujifilm.com.my
and cause a fire or electric shock.
Philippines YKL Development & Trdg. Corp. h If the cord is damaged, contact your
Technical support 24 Sto. Domingo St., Quezon City 1100, Philippines FUJIFILM dealer.
TEL 632-7436601~06 FAX 632-7324661 digital@yklcolor.com Do not place the camera on an
Repair service 24 Sto. Domingo St., Quezon City 1100, Philippines unstable surface.
TEL 632-7436601~06 FAX 632-7324661 tech_services@yklcolor.com This can cause the camera to fall or tip
Singapore Fuji Photo Film Singapore Pte Ltd over and cause injury.
Technical support & 10 New Industrial Road Fujifilm Building Singapore 536201
Repair service TEL 65-6380 5557 FAX 65-6281 3594 service@fujifilm.com.sg Never attempt to take pictures while
South Korea Korea Fujifilm Co., Ltd. in motion.
Technical support 30-1, Mukjeung-dong, Jung-gu, Seoul, Korea Do not use the camera while you are
TEL +82-2-3282-7363 FAX +82-2-2269-7435 photo@fujifilm.co.kr walking or driving a vehicle.
South Korea Yonsan AS Center (Fujidigital) This can result in you falling down or
Repair service #301, 3F, Jeonjaland, 16-9, Hangangro3-ga, Yongsan-gu, Seoul, Korea being involved in a traffic accident.
TEL +82-2-701-1472 FAX +82-2-718-1331 1bowl@hanmail.net
South Korea Kangnam AS Center (Digitalgallery) Do not touch any metal parts of the
Repair service 2F, Hyeongin Tower, 23-2, Bangyi-dong, Songpa-gu, Seoul, Korea camera during a thunderstorm.
TEL +82-2-2203-1472 FAX +82-2-418-5572 nurijili@hanmail.net This can cause an electric shock due to
South Korea Busan AS Center (Digital-Sewon) induced current from the lightning
Repair service 241-4, Bujeon-dong, Busanjin-gu, Busan, Korea discharge.
TEL +82-51-806-1472 FAX +82-51-817-0083 merahan@yahoo.co.kr Do not use the batteries except as
Taiwan Hung Chong Corp. specified.
Technical support & No. 38, Min-Chuan E. Rd. Sec. 6, Taipei (114), Taiwan, R.O.C.
Load the batteries with the ≠ and –
Repair service TEL 886-2-6602-8988 FAX 886-2-2791-8647 dah@mail.hungchong.com.tw marks.
Thailand Fuji Photo Film (Thailand) Ltd.
Technical support 388 SP Building, 8th Floor, Phayathai, Bangkok 10400
TEL +662-2730029 ext. 755 FAX +662-2730239 supaleark@fujifilm.co.th
Repair service 388 SP Building, 8th Floor, Phayathai, Bangkok 10400
TEL +662-2730029 ext.761,762 FAX +662-2730239 warin@fujifilm.co.th
134 135
Safety Notes Memo
WARNING CAUTION
Do not heat, change or take apart the Do not use this camera in locations
batteries. affected by oil fumes, steam,
Do not drop or subject the batteries humidity or dust.
to impacts. This can cause a fire or electric shock.
Do not attempt to recharge lithium or
alkaline batteries. Do not leave this camera in places
Do not store the batteries with subject to extremely high
metallic products. temperatures.
Do not use chargers other than the Do not leave the camera in locations such
specified model to charge the as a sealed vehicle or in direct sunlight.
batteries. This can cause a fire.
Any of these actions can cause the
Keep out of the reach of small
batteries to burst or leak and cause fire
children.
or injury as a result.
This product could cause injury in the
Use only the batteries or AC power hands of a child.
adapters specified for use with this
camera. Do not place heavy objects on the
Do not use voltages other than the camera.
power supply voltage shown. This can cause the heavy object to tip
The use of other power sources can over or fall and cause injury.
cause a fire. Do not move the camera while the
If the battery leaks and fluid gets in AC power adapter is still connected.
contact with your eyes, skin or Do not pull on the connection cord
clothing. Flush the affected area with to disconnect the AC power adapter.
clean water and seek medical This can damage the power cord or
attention or call an emergency cables and cause a fire or electric shock.
number right away.
Do not use the AC power adapter
Do not use the charger to charge when the plug is damaged or the
batteries other than those specified plug socket connection is loose.
here. This could cause a fire or electric shock.
The charger is designed for Fujifilm HR-
AA Ni-MH batteries. Using the charger Do not cover or wrap the camera or
to charge conventional batteries or the AC power adapter in a cloth or
other types of rechargeable batteries blanket.
can cause the battery to leak fluid, This can cause heat to build up and
overheat or burst. distort the casing or cause a fire.
When discarding or storing batteries, When you are cleaning the camera
cover the battery terminals with or you do not plan to use the camera
insulation tape. for an extended period, remove the
h Contact with other metallic objects or batteries and disconnect and unplug
batteries could cause the batteries to the AC power adapter.
ignite or burst. Failure to do so can cause a fire or
electric shock.
Keep xD-Picture Cards out of the
reach of small children. When charging ends, unplug the
Because xD-Picture Cards are small, charger from the power socket.
they can be swallowed by children. Be Leaving the charger plugged into the
sure to store xD-Picture Cards out of power socket can cause a fire.
the reach of small children. If a child
Using a flash too close to a person’s
swallows an xD-Picture Card, seek
eyes may temporarily affect the
medical attention or call an emergency
eyesight.
number.
Take particular care when photographing
infants and young children.
When an xD-Picture Card is
removed, the card could come out of
the slot too quickly. Use your finger
to hold it and gently release the card.
Request regular internal testing and
cleaning for your camera.
Build-up of dust in your camera can
cause a fire or electric shock.
h Contact your FUJIFILM dealer to
request internal cleaning every 2 years.
h Please note this is not a free of charge
service.
136 137
Memo
138
26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan
http://home.fujifilm.com/products/digital/