Professional Documents
Culture Documents
Guide Local-Remote Connection ION-Mx
Guide Local-Remote Connection ION-Mx
Guide of
Remote and Local
Connection
With
Ion-
Ion-M
1|Page
ION-M ANDREW 2008
Table of Contents
2|Page
ION-M ANDREW 2008
3|Page
ION-M ANDREW 2008
Click Next.
Click Next.
4|Page
ION-M ANDREW 2008
Click Next.
Click Finish.
5|Page
ION-M ANDREW 2008
Click Next.
Click Next.
6|Page
ION-M ANDREW 2008
Click Next.
Click Next.
Click Next.
7|Page
ION-M ANDREW 2008
Click Next.
Click Next.
8|Page
ION-M ANDREW 2008
Click Finish.
Click Properties.
Click Configure.
Maximum
Repeater
Speed
9|Page
ION-M ANDREW 2008
13. Select the Options tab and make sure that all
dialing options except Include Windows logon
domain are checked.
Click OK.
click OK.
10 | P a g e
ION-M ANDREW 2008
11 | P a g e
ION-M ANDREW 2008
12 | P a g e
ION-M ANDREW 2008
Network Icon
Click the icon and select the Details tab, to get the Server
IP address for software access. The displayed Server IP-
address has to be entered as part of the URL for access
to the repeater software.
13 | P a g e
ION-M ANDREW 2008
Password: Apwd4own
14 | P a g e
ION-M ANDREW 2008
Click Next.
15 | P a g e
ION-M ANDREW 2008
Repeater Models
Click Next.
Click Next.
Click Finish.
16 | P a g e
ION-M ANDREW 2008
Click Next.
17 | P a g e
ION-M ANDREW 2008
Click Next.
5. In the Select a Device window, select the according device depending on the
modem used for dial out.
Click Next.
Click Next.
18 | P a g e
ION-M ANDREW 2008
Click Next.
Click Finish.
19 | P a g e
ION-M ANDREW 2008
Click Properties.
Click Configure.
20 | P a g e
ION-M ANDREW 2008
13. Select the Options tab and make sure that all
dialing options e x c e p t Include Windows logon
domain are checked.
Click OK.
Click OK.
21 | P a g e
ION-M ANDREW 2008
Click Advanced.
22 | P a g e
ION-M ANDREW 2008
Click OK.
Connect window.
23 | P a g e
ION-M ANDREW 2008
Click Dial.
When the connection is successful an icon indicating network activity between the
local and remote computer will appear in the system tray.
Click the icon and select the Details tab, to get the Server
IP address for software access.
24 | P a g e
ION-M ANDREW 2008
Note: Cable LAN crossover is connected in LAN port, located back of RMC.
25 | P a g e
ION-M ANDREW 2008
These settings are necessary when the MMR System will be accessed via LAN.
26 | P a g e