Professional Documents
Culture Documents
NOVOMATIC AG gives no guarantee and accepts no legal responsibility (neither as a liability nor in any other
way) for any errors and consequences that may arise from incorrect statements in this manual or an incorrect use
of this manual.
The author welcomes any notifications of errors or ambiguities. The product names used in this manual may be
registered trademarks and/or brands of the relevant companies belonging to the Novomatic Group. All rights
reserved.
Any forms of reproduction (printing, photocopying, or other forms) of any part of this manual, and any processing,
multiplying and distributing by the use of electronic systems shall be prohibited unless NOVOMATIC AG has
given a written consent.
This manual is part of the device and must be passed on together with the device to any new owner or holder of
the device. It must be kept for the whole time the device is used and must be accessible to the technical staff at all
times.
The instructions contained in this manual must be strictly obeyed.
This manual was created in accordance with the European norm EN 82079:2001 and is valid for Universal
Controller UCB-6 LITE for the myACP System until a newer version is released.
Publisher: Manufacturer:
Octavian.SPb – NOVOMATIC Group of Companies NOVOMATIC AG
Aquatoria Business Centre Wiener Strasse 158
61, Vyborgskaya emb. 2352 Gumpoldskirchen, Austria, Europe
197342 St. Petersburg, Russia, Europe Tel.: +43 2252 606
Tel.: +7 812 380 2555 info@novomatic.com
info@octavianonline.com www.novomatic.com
www.octavianonline.com
Technical Support:
Tel.: +43 2252 606-300 Fax: +43 2252 606-211 support@novomatic.com
2 © NOVOMATIC 09 2019
TABLE OF CONTENTS
Table of Contents
Table of Contents 3
1 Introduction 5
3 General Description 7
9 Software Upgrade 20
© NOVOMATIC 09 2019 3
TABLE OF CONTENTS
4 © NOVOMATIC 09 2019
INTRODUCTION 1
1 Introduction
This document is a user manual for working with the Universal Controller UCB-6 LITE designed to connect
gaming equipment to the myACP System.
The document provides information on functionality and operating principle of the UCB-6 LITE. It also
contains reference data and guidelines for device installation and maintenance.
© NOVOMATIC 09 2019 5
2 TERMS AND DEFINITIONS
UCB-6 LITE - universal and multipurpose network controller of the gaming equipment
designed to connect gaming equipment to the myACP System.
6 © NOVOMATIC 09 2019
GENERAL DESCRIPTION 3
3 General Description
UCB-6 LITE enables you to connect the following gaming device to the myACP System:
Gaming machines which support electronic communication protocols;
© NOVOMATIC 09 2019 7
4 UCB-6 LITE DESIGN AND TECHNICAL FEATURES
The UCB-6 LITE is an ultra-compact software and hardware module designed on the basis of the
RCM6710 controller.
The RCM6710 controllers manufactured by DIGI are functionally complete modules designed to connect
electronic devices via successive and/or parallel interfaces.
8 © NOVOMATIC 09 2019
UCB-6 LITE DESIGN AND TECHNICAL FEATURES 4
The UCB-6 LITE is supplied with interface and indicator board manufactured by IMPEX designed to convert
the interfaces and indicate the UCB-6 LITE operating modes.
The board is equipped with LED indicators that are described in chapter 4.4 on page 14.
For information on connector pins, see chapter 4.3 on page 11.
© NOVOMATIC 09 2019 9
4 UCB-6 LITE DESIGN AND TECHNICAL FEATURES
4.2 Features
10 © NOVOMATIC 09 2019
UCB-6 LITE DESIGN AND TECHNICAL FEATURES 4
Connector RJ-45
Ethernet
Pin Signal
1 Tx+
2 Tx-
3 Rx+
4 N/C
5 N/C
6 Rx
7 N/C
8 N/C
Tbl. 4-1 Pin assignment of the Ethernet connector
© NOVOMATIC 09 2019 11
4 UCB-6 LITE DESIGN AND TECHNICAL FEATURES
Power
PTM EGM
12 © NOVOMATIC 09 2019
UCB-6 LITE DESIGN AND TECHNICAL FEATURES 4
© NOVOMATIC 09 2019 13
4 UCB-6 LITE DESIGN AND TECHNICAL FEATURES
The indicator board is equipped with 18 LEDs which indicate the main UCB-6 LITE modes. The LEDs are
designated as D1 - D6.
INFORMATION
Possible values of the Heartbeat LED during diagnostic procedures are described in chapter 5 on
page 15.
14 © NOVOMATIC 09 2019
STANDARD SCHEMES OF UCB-6 LITE CONNECTION 5
If the UCB-6 LITE is used as a controller of the gaming machine which supports electronic
communication protocols. The following connection scheme is used:
Illustr. 5-1 Standard connection scheme of the gaming machine which supports electronic communication protocols
NOTE
One gaming machine which supports electronic communication protocols can be connected to one
controller. The gaming machine is connected via the EGM port.
© NOVOMATIC 09 2019 15
5 STANDARD SCHEMES OF UCB-6 LITE CONNECTION
If UCB-6 LITE is used as a controller of the gaming machine equipped with the PTM module, the
following connection scheme is used:
Illustr. 5-2 Standard connection scheme of the gaming machine equipped with the PTM module
NOTE
One gaming machine which supports electronic communication protocols and one PTM module can
be connected to one controller. The gaming machine is connected via the EGM port. The PTM
module is connected via the PTM port.
16 © NOVOMATIC 09 2019
GENERAL GUIDELINES FOR UCB-6 LITE CONNECTION 6
The UCB-6 LITE is installed inside of the cabinet of the gaming device. It should be placed in such a
manner that will allow free air circulation to prevent overheating.
For more information on how to connect different gaming devices to the UCB-6 LITE, see technical
documentation delivered with the gaming equipment.
INFORMATION
The controller Dallas ID number is composed of the MAC-address of the RCM6710 board. To
obtain a Dallas ID from a MAC-address you have to read bytes in reverse order, e.g. if the MAC-
address is 00:90:E8:0A:79:76, the Dallas ID will be 76790AE89000.
© NOVOMATIC 09 2019 17
7 UCB-6 LITE DIAGNOSTICS
The autotest is constantly performed during UCB-6 LITE operation. The test results are displayed via the
LED Heartbeat.
The test set consists of four tests and begins with these headings:
LED is off within 2,5 sec;
LED is on within 2,5 sec;
LED is off within 2,5 sec.
INFORMATION
The test set of the software intended for the gaming machines is shown in table 6.2.
INFORMATION
The SM Power test is always passed successfully.
If the GLM Online test is failed (the Logon GLM test is also failed), you have to contact the
responsible myACP support engineer to resolve these issues.
18 © NOVOMATIC 09 2019
RESETTING UCB-6 LITE TO FACTORY DEFAULT SETTINGS 8
If the UCB-6 LITE device becomes inoperable due to failures, it has to be reset to the original factory
settings.
NOTE
When resetting a controller, the configuration data, uploaded templates and event history (except
financial transactions) are lost.
© NOVOMATIC 09 2019 19
9 SOFTWARE UPGRADE
9 Software Upgrade
The UCB-6 LITE is delivered with the pre-installed software developed by Octavian.SPb.
NOTE
The UCB-6 LITE boards and dedicated software are intended only for the use within the networks of
those gaming operators for which they were produced. Usage of the UCB-6 LITE and dedicated
software in other operator networks may lead to controller failure.
To upgrade controller software, you have to contact the Octavian SPb’s Support Department and provide
the information on the actual software version. Based on these data, the Support Department will prepare
and send you the required files.
20 © NOVOMATIC 09 2019
© NOVOMATIC 09 2019 21
22 © NOVOMATIC 09 2019