Professional Documents
Culture Documents
EVSIM Exam - Example Solution
EVSIM Exam - Example Solution
Answer : D
Answer : A
Answer : B
5. What are the inputs and outputs of the vehicle’s dynamics model? 1 Marks
Answer : C
6. When changing the vehicle speed from 0 to a positive value, the power linked to the
acceleration has a value ...? 1 Marks
Answer : C
7. By using the batteries data-sheets, what is the reference of the battery which gives the
following energy density 249 Wh/kg. 1 Marks
Answer : D
8. By using the batteries data-sheets, what is the reference of the battery that gives the
greatest power density. 1 Marks
Answer : D
9. The entire NEDC drive cycle test represents a displacement of approximately: 1 Marks
Answer : B
10. What is the average driving speed with the NEDC cycle? 0.5 Marks
Answer : C
11. By using the figure below, what is the value of traction power? 0.5 Marks
Answer : B
12. By using the figure below, what is the value of braking power? 1 Marks
Answer : D
13. By using the figure below, what is the value of Total Energy Consumption? 1 Marks
Answer : A
14. By using the figure below, what is the value of Total energy Consumption for 100 km
of range? 1 Marks
Answer : B
Section B: Dr. Mehdi TAHERZADEH (4.5 Marks)
1- For an AC motor, stator and rotor have, respectively, 3 and 2 windings with different
space vectors. Without any simplification, at least how many differential equations are
needed to model the motor? 0.5 Marks
Answer : B
2- For an AC motor, with neglecting the effect of friction on the torque: 0.5 Marks
Answer : A
3- For a DC motor, 120 V, Ra=0.1 ohm, Laa=1mH, Laf=300 mH, the armature current is
10 A at full load. Calculate full load speed and electromagnetic torque at full load. The
field current is 1.5 A at full load condition. 1 Marks
Answer : D
Answer : D
6- The currents of a PMSM motor have been measured at the terminals as ia= 10 sin (θ-
π/4), ib= 10 sin (θ-2π/3-π/4), ic= 10 sin (θ+2π/3-π/4). By using these two
transformations: 1 Marks
Answer : D
7- Simplify model of an electric motor is presented as : 0.5 Marks
v ds = rs i ds + rlds - wr lqs
v qs = rs i qs + rlqs + wr lds
v f = rf i f + rlf
Answer : C
Answer: C
3- Now, suppose in the future batteries can be charged in 10 seconds. Assume a battery
voltage of 360 V in the battery pack of 75kWh. Calculate the charging current and the
charging power 0.5 Marks
Answer: D
4- Calculate the final SOC of the battery after 3 hours of charging under 12 A of current
from an initial SOC of 32.5 %. The capacity of the battery is 96 Ah. 0.5 Marks
Answer: B
Answer: D