Professional Documents
Culture Documents
NOTE
To save the Function parameters and the Touch on/off status to internal memory
(flash memory), press and hold the [FUNCTION] button. (See page 68.)
2 Input the appropriate value or use the [plus]/[minus] buttons to set the
selected Function.
NOTE
To input a negative value, simultaneously hold the [minus] button and enter the
number.
Function parameters
Refer to "02_FunctionParameters.xls" in the Excel folder.
Data Backup
Data Backup
The following data can be stored to internal flash memory as data backup.
(Table)
Group Parameter
SONG User Song Data
FUNCTION Tuning
Split Point
Touch Sensitivity
Sustain On/Off
Style Volume
Song Volume
Metronome Volume
Demo Cancel On/Off
Touch Touch On/Off
(Table end)
CAUTION
Never attempt to turn the power off when data is being transferred from a computer.
Doing so can damage the internal flash memory and result in loss of data.
Data Initialization
All Data Initialization (including loaded song data)
All data can be initialized by turning on the power while holding the highest
(rightmost) white key (C6) and nearest A key (A5) on the keyboard. "CLr All Mem"
will appear briefly on the display. You can also execute this setting in the
Utility mode (see page 67.)
CAUTION
All data listed above, plus loaded song data, will be erased and/or changed when
the All Data Initialization procedure is carried out.
Carrying out the data initialization procedure will usually restore normal
operation if the EZ-250i freezes or begins to act erratically for any reason.