Professional Documents
Culture Documents
Smooth Tiles Blanket: Designed by Ana Morais Soares
Smooth Tiles Blanket: Designed by Ana Morais Soares
Tiles
Blanket
Anchor Baby Pure Cotton 50 g Art. No. 4804000 - # (Colour nº) Crochet
3 x #00105
2 x #00271; #00423; #00430 Intermediate
3
PATTERN TUTORIAL
Notes
- Each row begins with a standing st.
- Yarn is always cut at the end of each row. Do not weave in ends.
- Color A is the MC.
- Even rows are always worked in FLO, alternating other 3 colors.
- Odd rows are worked using MC. Sc from these rows are always worked in
BLO while all dcs are worked in FLO.
Please review our full terms of use of this pattern on our website
© Copyright MEZ Needlecraft GmbH, 2019.
MEZ Needlecraft GmbH · Hauptstraße 78 · D-79336 Herbolzheim, Germany · AnchorCrafts.com 2/5
3
ANC0003-46 Smooth Tiles Blanket
Row 4: (WS – Color D) Work entire row in FLO. Start with a standing dc BORDER
in 1st st. Dc in next 2 sts. *Hdc in next st. Dc in next 5 sts.** Repeat from * Before starting the border tie each 2 strands with 2 knots. Then cut ends
to ** until there is only 4 sts left. Hdc in next st. Dc in last 3 sts. Cut yarn. 2 cm long.
Turn. [116 dc, 23 hdc] The blanket will have a double border to hide the ends. Back side border
is worked first. Then front side must be worked. Both borders are joined at
the top with a rnd worked in blanket front side.
Row 5: (RS – MC) Work entire row in BLO except for the dcs that are
going to be worked in row 3 sts. These are worked in FLO. Start with a Now prepare the side edges (long sides) by working a row of loosely sl sts
standing sc in 1st st. Sc in next 2 sts. Dc in next st, two rows down. It is the to make it easier to get the hook in.
4th st of row 3. Skip the st behind. It is the hdc from last row. *Sc in next 5 Using MC, insert hook in BLO of last st from top, to start working on left
sts. Dc in next st, two rows down. Skip the st behind. It is the hdc from last side edge. Pull up a loop. (In pictures I used a different color to make sts
row.** Repeat from * to ** until there is only 3 sts left. Sc in last 3 sts. Cut more visible.)
yarn. Turn. [116 dc, 23 hdc]
Row 6: (WS – Color C) Work entire row in FLO. Start with a standing dc in Work a sl st in every sc row (do not forget to work in the first and last sc
1st st. Dc in next 5 sts. *Hdc in next st. Dc in next 5 sts.** Repeat from * to rows) and 2 sl sts in every dc row. Always work in the dc st and not around
** until there is only 1 st left. Dc in last st. Cut yarn. Turn. [117 dc, 22 hdc] it. Cut yarn. Leave a long tail to sew in ends after the first rnd of the border
is done. It will prevent your sl st from undoing. [193 sl st]
Row 7: (RS – MC) Work entire row in BLO except for the dcs that are
going to be worked in row 5 sts. These are worked in FLO. Start with a Beginning Wrong side Bottom
standing sc in 1st st. Sc in next 5 sts. Dc in next st, two rows down. It is the
7th st of row 5. Skip the st behind. It is the hdc from last row. *Sc in next 5 Also using MC, insert hook in first ch loop from bottom, to start working
sts. Dc in next st, two rows down. Skip the st behind. It is the hdc from last on right side edge. Pull up a loop. Work exactly as you did for left edge.
row.** Repeat from * to ** until there is only 6 sts left. Sc in last 6 sts. Cut Cut yarn. Leave a long tail to sew in ends after the first rnd of the border is
yarn. Turn. [117 sc, 22 dc] done. It will prevent your sl st from undoing. [193 sl st]
Repeat rows 4-7 thirty more times, alternating the contrast colors for each
WS row. Repeat rows 4 and 5 one more time.
Please review our full terms of use of this pattern on our website
© Copyright MEZ Needlecraft GmbH, 2019.
To help while working first border rnd put a SM in first and last sts of top
and bottom rows. These marked sts will be the first or last st of the new
corners. The other corner sts will be worked in first and last sl st from long
sides edges.
Rnd 1: (Color A) Start with a standing sc in the left SM from top side, catch-
ing both loops from the st. Ch2. Sc in first sl st from side edge. Sc in every
WRONG SIDE BORDER sl st until next corner. Ch2. Sc in ch loop of 1st st from bottom side. Sc in
Now it is time to work the first row of wrong side border, starting in the every st to the corner. Ch2. Sc in first sl st from side edge. Sc in every sl st
bottom side. until next corner. Ch2. Sc in every st of top side to the end. Sl st to first sc.
Cut yarn and sew in ends. [139 sc in short sides / 193 sc in long sides / 4 x
Rnd 1: (Color B) Start with a standing hdc in the 3rd loop of 3rd st before ch2 corner sp]
corner (see picture below). Hdc in next st. 2 hdc in last st (all worked in 3rd
loop too). Ch2. 2 hdc in first sl sl of side edge. Hdc in every sl st until there
is only one sl st left before next corner. 2 hdc in last sl st. Ch2. 2 hdc in the
3rd loop of first st from top side (see picture below). Hdc in every st until
last st before corner (always work in 3rd loop). 2 hdc in 3rd loop of last st.
Ch2. 2 hdc in first sl sl of side edge. Hdc in every sl st until there is only one
sl st left before next corner. 2 hdc in last sl st. Ch2. 2 hdc in the 3rd loop of
1st st from bottom side. Hdc in every st until the end (work in 3rd loop). Sl st
to the first hdc. Cut yarn and sew in ends. [141 hdc in short sides / 195 hdc
in long sides / 4 x ch2 corner sp]
Rnd 2: (Color D) Start with a standing sc in any ch2 corner sp. (Ch2, sc) in
same ch2 corner sp. *Sc in every st to the next ch2 corner sp. (Sc, ch2, sc) in
next ch2 corner sp.** Repeat from * to ** 3 more times, omitting last corner
sts. Cut yarn and sew in ends. [141 sc in short sides / 195 sc in long sides /
4 x ch2 corner sp]
Rnd 3: (Color A) Start with a standing sc in any ch2 corner sp. (Ch2, sc) in
same ch2 corner sp. *Sc in every st to the next ch2 corner sp. (Sc, ch2, sc) in
next ch2 corner sp.** Repeat from * to ** 3 more times, omitting last corner
sts. Cut yarn and sew in ends. [143 sc in short sides / 197 sc in long sides /
4 x ch2 corner sp]
Rnd 4: (Color C) Start with a standing sc in any ch2 corner sp. (Ch2, sc) in
same ch2 corner sp. *Sc in every st to the next ch2 corner sp. (Sc, ch2, sc) in
next ch2 corner sp.** Repeat from * to ** 3 more times, omitting last corner
sts. Cut yarn and sew in ends. [145 sc in short sides / 199 sc in long sides /
4 x ch2 corner sp]
Rnd 2: (Color C) Start with a standing hdc in any ch2 corner sp. (Hdc, ch2, Rnd 5: (Color A) Start with a standing sc in any ch2 corner sp. (Ch2, sc) in
2 hdc) in same ch2 corner sp. *Hdc in every st to the next ch2 corner sp. (2 same ch2 corner sp. *Sc in every st to the next ch2 corner sp. (Sc, ch2, sc) in
hdc, ch2, 2 hdc) in next ch2 corner sp.** Repeat from * to ** 3 more times, next ch2 corner sp.** Repeat from * to ** 3 more times, omitting last corner
omitting last corner sts. Cut yarn and sew in ends. [145 hdc in short sides / sts. Cut yarn and sew in ends. [147 sc in short sides / 201 sc in long sides /
199 hdc in long sides / 4 x ch2 corner sp] 4 x ch2 corner sp]
Rnd 3: (Color D) Start with a standing dc in any ch2 corner sp. (Dc, ch2, 2 Rnd 6: (Color B) Start with a standing sc in any ch2 corner sp. (Ch2, sc) in
dc) in same ch2 corner sp. *Dc in every st to the next ch2 corner sp. (2 dc, same ch2 corner sp. *Sc in every st to the next ch2 corner sp. (Sc, ch2, sc) in
ch2, 2 dc) in next ch2 corner sp.** Repeat from * to ** 3 more times, omit- next ch2 corner sp.** Repeat from * to ** 3 more times, omitting last corner
ting last corner sts. Cut yarn and sew in ends. [149 dc in short sides / 203 dc sts. Cut yarn and sew in ends. [149 sc in short sides / 203 sc in long sides /
in long sides / 4 x ch2 corner sp] 4 x ch2 corner sp]
Please review our full terms of use of this pattern on our website
© Copyright MEZ Needlecraft GmbH, 2019.
WASHING ADVICE
Always wash in as warm a water temperature as possible - up to the tempera-
ture recommended, with a short spin. Use a lot of water if hand washing. For
darker colours we recommend the use of discolouration sheets.
Do not Bleach.
Do not tumble dry. Drip-dry on a horizontal surface.
Iron on a hot temperature setting using a damp cloth.
Professional dry cleaning in tetrachloroethylene.
Do not use optical brighteners (or any detergent containing optical
brighteners).
LAST BORDER ROUND We recommend to use a softener to preserve the natural softness of the yarn.
Last border round is worked on the right side of the blanket and will join
both front and back sides of the border. Stitches are worked by picking
up both loops of front border sts and the corresponding 2 loops of back
border sts.
Use MC. Short side: Start with a standing sc in any ch2 corner sp at the
beginning of a short side. (Picot, sc) in same ch2 corner sp. *(Sc in next 6
sts, picot) 24 times. Sc in next 5 sts. (2 sc, picot, sc) in next ch2 corner. Long
side: (Sc in next 6 sts, picot) 33 times. Sc in next 5 sts. (2 sc, picot, sc) in next
ch2 corner.** Repeat from * to ** one more time, omitting last (sc, picot, sc)
corner sts. Cut yarn and sew in ends. [149 sc, 24 picots in short sides / 203
sc, 33 picots in long sides / 4 x (2 sc, picot, sc) in ch2 corner sp]
Please review our full terms of use of this pattern on our website
© Copyright MEZ Needlecraft GmbH, 2019.
Anchor Baby Pure Cotton 50 g Art. No. 4804000 - # (Cor nº) Crochet
3 x #00105
2 x #00271; #00423; #00430 Intermédio
3
Notas
- Cada carr começa com um ponto em pé.
- O fio é sempre cortado no final de cada carr. Não remate as pontas.
- A cor A é a CP.
- As carr do avesso são trabalhadas nas alças da frente dos pontos, alter-
nando as 3 cores de contraste.
- As carreiras do direito são sempre trabalhadas na CP. Os pb são feitos
nas alças de trás dos pontos enquanto os pa são trabalhados nas alças da
frente dos pontos, duas carreiras abaixo.
Carr 4: (Avtra – Cor D) Trabalhe toda a carr nas alças da frente dos pts. Repita as carr 4-7 mais 30 vezes, alternando as cores de contraste em cada
Comece com 1 pa em pé no primeiro pt. Pa nos 2 pts seguintes. *Mpa no carr do avesso. Repita as carr 4 e 5 uma vez mais.
pt seguinte. Pa nos 5 pts seguintes.** Repita desde * até **, até restarem
apenas 4 pts. Mpa no pt seguinte. Pa nos últimos 3 pts. Corte o fio e vire BORDA
o trabalho. [116 pa, 23 mpa] Antes de iniciar a borda dê um nó em cada duas pontas. Corte os fios
deixando 2 cm de comprimento.
A manta terá uma borda dupla para esconder as pontas. Primeiro será feita
a borda do avesso e depois a do direito. Ambas as bordas serão unidas por
uma última volta de crochet trabalhada na frente do trabalho.
Carr 5: (Dtra – CP) Trabalhe toda a carr nas alças de trás dos pts excep-
to quando fizer os pa. Estes são trabalhados nas alças da frente dos pts
da carr 3. Comece com 1 pb em pé no primeiro pt. Pb nos 2 pts seguintes.
Pa no pt seguinte, duas carr abaixo. É o quarto pt da carr 3. Salte o pt que
ficou por trás do pa. É o mpa da carr anterior. *Pb nos 5 pts seguintes. Pa
no pt seguinte, duas carr abaixo. Salte o pt que ficou por trás do pa. É o Prepare as laterais da manta (lados mais compridos) trabalhando uma car-
mpa da carr anterior.** Repita desde * até **, até restarem apenas 3 pts. Pb reira de pbx sem os apertar muito.
nos últimos 3 pts. Corte o fio e vire o trabalho. [116 pa, 23 mpa] Insira a agulha na alça de trás do último pt do topo da manta, para come-
çar a trabalhar o lado esquerdo. Usando a CP puxe uma alça. (Nas fotos
usei uma cor diferente para que os pts sejam mais visíveis.)
Carr 6: (Avtra – Cor C) Trabalhe toda a carr nas alças da frente dos pts.
Comece com 1 pa em pé no primeiro pt. Pa nos 5 pts seguintes. *Mpa no
pt seguinte. Pa nos 5 pts seguintes.** Repita desde * até **, até restar ape-
nas 1 pt. Pa no último pt. Corte o fio e vire o trabalho. [117 pa, 22 mpa] Trabalhe 1 pbx em cada carr de pb (não se esqueça de trabalhar na primei-
ra e última carr de pb) e 2 pbx em cada carr de pa. Trabalhe sempre nos
pa e não em torno deles. Corte o fio. Deixe uma ponta grande e remate-a
depois da primeira volta da borda ser feita. Isto evitará que o último pbx
se desmanche. [193 pbx]
Carr 7: (Dtra – CP) Trabalhe toda a carr nas alças de trás dos pts excepto
quando fizer os pa. Estes são trabalhados nas alças da frente dos pts
da carr 5. Comece com 1 pb em pé no primeiro pt. Pb nos 5 pts seguintes.
Pa no pt seguinte, duas carr abaixo. É o sétimo pt da carr 5. Salte o pt que
ficou por trás do pa. É o mpa da carr anterior. *Pb nos 5 pts seguintes. Pa Início (topo) Avesso Fim (base)
no pt seguinte, duas carr abaixo. Salte o pt que ficou por trás do pa. É o
mpa da carr anterior.** Repita desde * até **, até restarem apenas 6 pts. Pb Continue com a CP. Insira a agulha na primeira corr da base da manta para
nesses últimos 6 pts. Corte o fio e vire o trabalho. [117 pb, 22 pa] começar a lateral direita. Puxe uma alça. Repita o que fez com a lateral
esquerda. Corte o fio e deixe uma ponta longa. [193 pbx]
BORDA DO DIREITO
Os pts da borda do direito são trabalhados nos pbx dos lados compridos,
nos pts do topo (apanhando ambas as alças) e nas corr da base da manta.
(ver imagens abaixo)